Bouncing/low idle with KL31/36

V6 Technical/Performance Discussions
User avatar
MrMazda92
Supporting Member
Posts: 5201
Joined: October 8th, 2009, 5:35 pm
antispam: No
Location: Midwest

Re: Bouncing/low idle with KL31/36

Post by MrMazda92 »

Try adjusting your TPS(Throttle Positioning Sensor) and throttle stop screw.
Daily:
'12 Challenger R/T + STP - 3.92 w/ LSD, JG Cam, headers, SkipShift delete, Clutch Delay Valve delete, Hurst STS, RAM Clutch Adjuster, StopTech 6 Piston Brakes, Sticky Nittos, 435 WHP

Kid Hauler:
'08 Suburban LT 4WD - TVS 1900 Blower, LF SC Cam, headers, AFM delete, true 5" lift, 33x12s, 523 WHP

First Love:
'92 GS 5 spd - Straightneck KL/67mm TB, MegaSquirt/Coilpacks, 5 lugs/Speed6 brakes/FD wheels, wiretuck, coilovers, headers, AEM WB, Borla
Deleted: VAF/Power Steering/Air Conditioning/EGR/ABS/Auto Seatbelts/etc
User avatar
sinix3
Regular Member
Posts: 64
Joined: October 13th, 2012, 2:43 pm
antispam: ~SPAM*SUX~
Location: british columbia

Re: Bouncing/low idle with KL31/36

Post by sinix3 »

i realise this is a very dead thread but i have a quick question. i swapped a klze into my mx3(92) and it runs fine(but rich) on the k8 ecu and je 50 vaf. but i got a chipped ecu out of the car i pulled my engine from and the kl02 vaf. now that i swapped it into my car the idle is extremly low and no matter how i adjust the idle screw it doesnt bring the idle up. im thinking that i need to adjust the tps but im not sure. any help is awesome.
92 mx3 gs klze swap.
"nitrous is like a hot chick with an std you know you want to hit it but your afraid of the consequences"
Post Reply

Return to “V6 Technical/Performance”