WTB: OEM & Aftermarket MX-3 Parts for SCCA Club Racer!!!!

[Frost881]

Some of you may be familiar with the project, for the un-initiated:
http://www.mx-3.com/phpBB3/viewtopic.php?f=46&t=79046

Its in its infant stages but you guys can help, I WANTZ PARTS!!!

Specifially i want an OEM Airbox for the B6right now, also i'm in the market for suspension components and body parts but I'm open to whatever you guys have to offer, let me know what you have!

[neuspeedescort]

i have some megan 2" drop springs and an ebay rear strut tower bar.


NEUMAN

[Frost881]

i have some megan 2" drop springs and an ebay rear strut tower bar.


NEUMAN

Any more info on those springs (proggressive/linear wound? spring rates? etc?) And that a front or rear strut bar?

[neuspeedescort]

strut tower bar is a rear one.

springs are as below from their site
1996MazdaMX-3
1995MazdaMX-3
1994MazdaMX-3
1993MazdaMX-3

Brand New
Me g an Racing
Lowering Springs
Specs :
Fits : 1993-1997 Mazda MX-3 (4 cyl. Models ONLY) Color : Orange Lowering Rate : 2" Front & 2" Rear Springs Rate : 335F & 250R Note : Picture shown is generic. Some springs will be larger than others. You will receive the correct set of springs for the application listed above. Megan Racing Performance Lowering Springs are constructed of SAE 9254 Cold Wounded Steel, one of the strongest materials available. The high tensile strength and phosphate powder coating delivers outstanding spring rates that are extremely durable and resist premature sagging . The result is a spring that specifically offers racecar handling, yet maintains smooth and comfortable ride characteristics. Carefully matched springs rates provide exceptional handling, response, control and balance. These springs offer a generous drop to your car while remaining very streetable by having enough clearance to avoid bottoming-out; and the lowered center of gravity improves performance and increases stability, as well as enhancing the appearance of the vehicle. (Note: Spring rates and drop amount vary by different vehicle application and chassis load.) All of our items we sell are 100% brand new (unless noted) and include a manufacturer's warranty



NEUMAN

[neuspeedescort]

i also have a full 2.25" exhaust for sale. 3 bolt flange at teh firewall, hi-flo cat, resinator, and a chambered muffler all wiht stock locating hangers. if i cut it at the corners it could be rewelded easily. could work out a pretty sweet package deal for you.


NEUMAN

[Frost881]

Might be interested in the strut tower bar depending on how much ya want for it

The springs are also a maybe as i'm still in the "get this b---- race ready" process and am still searchin around for what would be my best option suspension wise

The exhaust is not for me as i've already pieced mine together and am just awaiting the fab work to be done, 2.25 is also Waaaaaaay too big a diameter for a stock B6M engine

[neuspeedescort]

rear bar sold yesterday.

springs are only 50 +15 shipping. they are pretty new still.

understand about the exhaust. just didn't know if you where going to upgrade motor's.


NEUMAN

[mazdaspeed23]

i have a set of KYB struts for sale if interested $70 plus shipping