Monmouth, IL (3 hours south of Chicago, IL) '93 mx3 gs 2.5L
- Wooters
- Regular Member
- Posts: 50
- Joined: January 6th, 2012, 12:32 pm
- antispam: ~SPAM*SUX~
- Location: Monmouth, Illinois
Monmouth, IL (3 hours south of Chicago, IL) '93 mx3 gs 2.5L
I drove my first mx3 8 months ago and instantly fell in love with them. that was only with a 1.6L. I just purchased my mx3 on new years eve. the previous owner done a engine swap from the 1.8L to the 2.5L and installed a mazda performance chip. he was all about performance but not body and interior. I'm not complaining though because car has stupid high performance and the interior and exterior is super clean. the interior and body is all stock, but I would give it a 9-9.5. I am ordering aftermarket racing seats, steering wheel, drifter body kit, and wheels. What can I say, I love mx3's! I would love to come to a meet sometime!
Last edited by Wooters on January 14th, 2012, 2:49 pm, edited 2 times in total.
'93 MX-3 GS 2.5L KLZE
- Wooters
- Regular Member
- Posts: 50
- Joined: January 6th, 2012, 12:32 pm
- antispam: ~SPAM*SUX~
- Location: Monmouth, Illinois
Re: Monmouth, IL (3 hours south of Chicago, IL) '93 mx3 gs 2
Are there any other mx3's within chicago, st louis, iowa city, illinois/indiana border area?
'93 MX-3 GS 2.5L KLZE
- Savin
- Regular Member
- Posts: 1580
- Joined: November 18th, 2007, 3:05 pm
- Location: Crown Point, IN (Chicago area)
- Contact:
Re: Monmouth, IL (3 hours south of Chicago, IL) '93 mx3 gs 2
There's a few members in the Chitown area, but most of them have fallen off the face of the earth...
'95 MX-3 RS - Project "Déjà Vu" Destined for the scrapyard.
'93 MX-3 GS - SOLD!
'93 MX-3 GS SE - Parts car!
'94 MX-3 GS - Scrapped
'94 MX-3 RS - Scrapped
'96 Sunfire SE - Scrapped
'03 Sunfire SE - Deathtrap
'95 Cavalier Base - Scrapped
'94 Thunderbird LX - Collects dust
'89 Mustang GT - SOLD!
'93 MX-3 GS - SOLD!
'93 MX-3 GS SE - Parts car!
'94 MX-3 GS - Scrapped
'94 MX-3 RS - Scrapped
'96 Sunfire SE - Scrapped
'03 Sunfire SE - Deathtrap
'95 Cavalier Base - Scrapped
'94 Thunderbird LX - Collects dust
'89 Mustang GT - SOLD!
- Wooters
- Regular Member
- Posts: 50
- Joined: January 6th, 2012, 12:32 pm
- antispam: ~SPAM*SUX~
- Location: Monmouth, Illinois
Re: Monmouth, IL (3 hours south of Chicago, IL) '93 mx3 gs 2
Are there really mx3 meets bc I think it would be pretty awesome to attend one to see all the different customs of the cars
'93 MX-3 GS 2.5L KLZE
- Savin
- Regular Member
- Posts: 1580
- Joined: November 18th, 2007, 3:05 pm
- Location: Crown Point, IN (Chicago area)
- Contact:
Re: Monmouth, IL (3 hours south of Chicago, IL) '93 mx3 gs 2
Simple answer: No. There hasn't been a Chitown MX-3 meet that I've ever been aware of.
'95 MX-3 RS - Project "Déjà Vu" Destined for the scrapyard.
'93 MX-3 GS - SOLD!
'93 MX-3 GS SE - Parts car!
'94 MX-3 GS - Scrapped
'94 MX-3 RS - Scrapped
'96 Sunfire SE - Scrapped
'03 Sunfire SE - Deathtrap
'95 Cavalier Base - Scrapped
'94 Thunderbird LX - Collects dust
'89 Mustang GT - SOLD!
'93 MX-3 GS - SOLD!
'93 MX-3 GS SE - Parts car!
'94 MX-3 GS - Scrapped
'94 MX-3 RS - Scrapped
'96 Sunfire SE - Scrapped
'03 Sunfire SE - Deathtrap
'95 Cavalier Base - Scrapped
'94 Thunderbird LX - Collects dust
'89 Mustang GT - SOLD!
-
- Regular Member
- Posts: 131
- Joined: April 20th, 2004, 2:01 am
- Location: minnesota
Re: Monmouth, IL (3 hours south of Chicago, IL) '93 mx3 gs 2
How much did you pick your mx3 for? Looks pretty clean still and is that just a millenia ze or a true ze?
- Wooters
- Regular Member
- Posts: 50
- Joined: January 6th, 2012, 12:32 pm
- antispam: ~SPAM*SUX~
- Location: Monmouth, Illinois
Re: Monmouth, IL (3 hours south of Chicago, IL) '93 mx3 gs 2
i bought it for $1,100 bc the previous owner got busted doing 103 in a 55. They sherriff hit him with everything- wreckless driving, speeding, no seatbelt, no proof of insurance, open container (empty beer can in the back seat), and some otlher stuff.
And as far as:
And as far as:
I do not know what you mean by that. I still learning about these cars and their termonology.jamestakay wrote:How much did you pick your mx3 for? Looks pretty clean still and is that just a millenia ze or a true ze?
'93 MX-3 GS 2.5L KLZE
-
- Regular Member
- Posts: 131
- Joined: April 20th, 2004, 2:01 am
- Location: minnesota
Re: Monmouth, IL (3 hours south of Chicago, IL) '93 mx3 gs 2
Oh, that's a pretty good deal for a swapped mx3, especially decently clean! Well, a curve neck is said to be ze or some people say it's only 170hp millenia motor depending on cams, and heads. The straight necks are usually the jdm mx6 motors that produce 200hp, again with the right heads and cams. There's alot of kl motors that were being bought as klzes but not producing the 200hp and alot of people on different kl sites have always been trying to determine the differences and everything. If you read more about them, there's tons of info out there about the different motors. I was just interested to see if it was a true one with all the true ze goodies.
- Wooters
- Regular Member
- Posts: 50
- Joined: January 6th, 2012, 12:32 pm
- antispam: ~SPAM*SUX~
- Location: Monmouth, Illinois
Re: Monmouth, IL (3 hours south of Chicago, IL) '93 mx3 gs 2
ill let you know as soon as i find out
'93 MX-3 GS 2.5L KLZE
-
- Regular Member
- Posts: 131
- Joined: April 20th, 2004, 2:01 am
- Location: minnesota
Re: Monmouth, IL (3 hours south of Chicago, IL) '93 mx3 gs 2
Did he give you any other intake manifolds to go with the car? It looks like a stock 1.8 unless the rest is either de/ze? Look on the heads to see the stampings of the numbers and letters. Zes are kl31-101 kl31-1A1 des are kl-101 kl-1A1, or it might just be a 1.8. Who knows, does it get up and go really quick or?
- Wooters
- Regular Member
- Posts: 50
- Joined: January 6th, 2012, 12:32 pm
- antispam: ~SPAM*SUX~
- Location: Monmouth, Illinois
Re: Monmouth, IL (3 hours south of Chicago, IL) '93 mx3 gs 2
I received another identical manifold with the car. I will check out the heads for the stampings. As far as getting up and going, it does for a v6.jamestakay wrote:Did he give you any other intake manifolds to go with the car? It looks like a stock 1.8 unless the rest is either de/ze? Look on the heads to see the stampings of the numbers and letters. Zes are kl31-101 kl31-1A1 des are kl-101 kl-1A1, or it might just be a 1.8. Who knows, does it get up and go really quick or?
I dont have any times but as far as GEAR/SPEED:
-1st/ 26mph
-2nd/ 56mph
-3rd/ 79mph
-4th/ haven't topped it yet :p
-5th/ haven't topped it yet :p
the previous owener said that he had it up to 143 and he said it was still climbing. I haven't checked it out yet tho.
'93 MX-3 GS 2.5L KLZE
-
- Regular Member
- Posts: 131
- Joined: April 20th, 2004, 2:01 am
- Location: minnesota
Re: Monmouth, IL (3 hours south of Chicago, IL) '93 mx3 gs 2
well, my stock mx3 can do those numbers and it feels quick but once you get in a ze or a de, you can clearly tell the difference. mx3 has lighter flywheel stock so it revs through the rpms quickly, de seems to have more torque but ze has that pull in the high rpms that the other 2 lack. just my opinion, others may differ.