swap wirring issue :(

[newdriver92]

So I have a 92 mx-3 gs atx and I'm puting in a 95 pgt mtx in and all is smooth,.... Well until it came too the wirring and I read the guide in the faqs and they did mention the yellow plug but the author failed to mention that there is 6 pins in 2 rows so with it not being the way he described it and now I'm confused :s so I would like a llittle help and another issuee is the neutral switch

[burgess]

i need to find this out too for my swap as well.

[Ryan]

The best way to do this is to use an MTX harness as well. There is some anomaly that I haven't found a solution to that stops the VRIS from working when you use an MTX ECM with an ATX harness.

I don't know what yellow plug you're talking about either.

The STARTER INTERLOCK gets wired into the ATX's park/neutral switch.

The neutral switch gets wired in seperately, for use in the A/C and idle controls, as well as the clutch switch.

Don't confuse them, they seem the same, but have different jobs.

[newdriver92]

where do u wire in the neutral switch

[Ryan]

Z-42.

http://www.mx-3.com/manuals/showimg.php ... /Z-042.gif

[newdriver92]

Thanks ryan