My 1.6 16v
- Savin
- Regular Member
- Posts: 1580
- Joined: November 18th, 2007, 3:05 pm
- Location: Crown Point, IN (Chicago area)
- Contact:
Re: My 1.6 16v
Where's the pictures of it flattened like a pancake? LAME! Do it right,
More pics now!
*in for more carnage pics if you post up*
More pics now!
*in for more carnage pics if you post up*
'95 MX-3 RS - Project "Déjà Vu" Destined for the scrapyard.
'93 MX-3 GS - SOLD!
'93 MX-3 GS SE - Parts car!
'94 MX-3 GS - Scrapped
'94 MX-3 RS - Scrapped
'96 Sunfire SE - Scrapped
'03 Sunfire SE - Deathtrap
'95 Cavalier Base - Scrapped
'94 Thunderbird LX - Collects dust
'89 Mustang GT - SOLD!
'93 MX-3 GS - SOLD!
'93 MX-3 GS SE - Parts car!
'94 MX-3 GS - Scrapped
'94 MX-3 RS - Scrapped
'96 Sunfire SE - Scrapped
'03 Sunfire SE - Deathtrap
'95 Cavalier Base - Scrapped
'94 Thunderbird LX - Collects dust
'89 Mustang GT - SOLD!
- nightstalker
- Regular Member
- Posts: 70
- Joined: October 31st, 2009, 6:23 pm
- antispam: No
Re: My 1.6 16v
As a final good bye to you all, I picked up a new car, a car which I know well and truly. You say Hon-duh? Well this car is 3 years older than the MX3 was, the body is in far better condition, the under side isn't falling into complete and utter failure and it cost £100 less than the MX3. Hon-duh? I say, f*cking well played, this thing is solid, spotless and will keep going a hell of a lot longer than your heaps of Ford shite!Jovian2k wrote:FYI you're posting this to people who actually appreciate this car, if you don't like MX-3's or any Mazdas then maybe you should buy a Hon-duhWhat an utter waste of time and money, I'll never go back again to this make of vehicle!
Funny because you seemed to like it judging by your previous posts and all the time and work you put into it.
I am waiting with baited breath for an MX3 to make a magazine feature in the UK, somehow, I don't think that will happen, smell you later losers!
- Ryan
- Senior Member
- Posts: 7198
- Joined: April 7th, 2008, 1:06 pm
- antispam: ~SPAM*SUX~
- Location: Manitoba
Re: My 1.6 16v
I like reading your posts. Always give me a chuckle.
Ford owned some 27% of Mazda when MX-3's were made, and Mazda built them. They build Fords cars for them, that was the deal. So calling a Probe a Mazda is more accurate than calling a MX-6 a Ford. You're just misinformed.
If you search you'll find various links of MX-3's in magazines, Hectors was in one, and there's an article in grassroots, off the top of my head. I don't know about UK magazines, but then again, I don't care either.
Glad you found a cx. Nice little commuter cars.
And of course, the underside situation of a car has to do with its life, not with its make. I've worked on many-a-honda with much worse rust than my MX...
Cheers with the Honda, I hope it serves you better than the MX.
And don't forget to put more stickers on it, and perhaps a bigger muffler.
Ford owned some 27% of Mazda when MX-3's were made, and Mazda built them. They build Fords cars for them, that was the deal. So calling a Probe a Mazda is more accurate than calling a MX-6 a Ford. You're just misinformed.
If you search you'll find various links of MX-3's in magazines, Hectors was in one, and there's an article in grassroots, off the top of my head. I don't know about UK magazines, but then again, I don't care either.
Glad you found a cx. Nice little commuter cars.
And of course, the underside situation of a car has to do with its life, not with its make. I've worked on many-a-honda with much worse rust than my MX...
Cheers with the Honda, I hope it serves you better than the MX.
And don't forget to put more stickers on it, and perhaps a bigger muffler.
Now with Moderator power!
Black '93 BP RS - wrecked, parted, scrapped.
Green GS - Sold.
Black GS - Summer DD/Race car - Fancy KLZE
Red GS - K8-ATX -> MTX-KLDE - Frakencar. Scrapped
White GS - Rusty. Parts. Scrapped
1997 BMW M3 - my summer baby
2002 BMW 325Xi - sold
2003 Forester Xti - EJ20K swapped.
Feedback
Black '93 BP RS - wrecked, parted, scrapped.
Green GS - Sold.
Black GS - Summer DD/Race car - Fancy KLZE
Red GS - K8-ATX -> MTX-KLDE - Frakencar. Scrapped
White GS - Rusty. Parts. Scrapped
1997 BMW M3 - my summer baby
2002 BMW 325Xi - sold
2003 Forester Xti - EJ20K swapped.
Feedback
- Josh
- Supporting Member
- Posts: 3432
- Joined: April 18th, 2002, 2:01 am
- Location: Washington state
- Contact:
Re: My 1.6 16v
cant add much more to it than that. good luck!... cheerioRyan wrote:I like reading your posts. Always give me a chuckle.
Ford owned some 27% of Mazda when MX-3's were made, and Mazda built them. They build Fords cars for them, that was the deal. So calling a Probe a Mazda is more accurate than calling a MX-6 a Ford. You're just misinformed.
If you search you'll find various links of MX-3's in magazines, Hectors was in one, and there's an article in grassroots, off the top of my head. I don't know about UK magazines, but then again, I don't care either.
Glad you found a cx. Nice little commuter cars.
And of course, the underside situation of a car has to do with its life, not with its make. I've worked on many-a-honda with much worse rust than my MX...
Cheers with the Honda, I hope it serves you better than the MX.
And don't forget to put more stickers on it, and perhaps a bigger muffler.
Josh
95' AWD MX-3 RST - (work log - http://www.mx-3.com/phpBB3/viewtopic.php?f=46&t=73765 )
94' GS - KLZE DD (work log - viewtopic.php?uid=2713&f=46&t=79063&start=0 )
05' MS RX-8 - Parted out and Sold :'(
Feedback - http://www.mx-3.com/phpBB3/viewtopic.php?f=37&t=49519
Cardomain Page - http://www.cardomain.com/ride/408020
Face Book page http://www.facebook.com/pages/Mazda-MX- ... 3472959216
95' AWD MX-3 RST - (work log - http://www.mx-3.com/phpBB3/viewtopic.php?f=46&t=73765 )
94' GS - KLZE DD (work log - viewtopic.php?uid=2713&f=46&t=79063&start=0 )
05' MS RX-8 - Parted out and Sold :'(
Feedback - http://www.mx-3.com/phpBB3/viewtopic.php?f=37&t=49519
Cardomain Page - http://www.cardomain.com/ride/408020
Face Book page http://www.facebook.com/pages/Mazda-MX- ... 3472959216
-
- Regular Member
- Posts: 1603
- Joined: March 6th, 2007, 1:17 pm
- Location: Pittsburgh, Pennsylvania (USA)
Re: My 1.6 16v
What's the 1/4 mile on a honduh? Compared to a 500 dollar bp swapped mx?
- AaronTietje
- Regular Member
- Posts: 1196
- Joined: August 21st, 2009, 5:24 pm
- antispam: No
- Location: Prattsburgh NY
Re: My 1.6 16v
I've always liked those cars. In fact, I just spied a leather rear seat for one in my local yard .......I've never seen the leather in them before, so I'm thinking that it's quite rare. Anywho, nice car. Enjoy it, and the squirrel under the hood
We all want to be fast and look cool. Cool changes but fast never does.
Re: My 1.6 16v
sorry i have to say it. cause there honestly is so many bloody civics around where i live. and its a little saying at my work. civics are like hemeroids, every a--holes got one
get a b16 for it. v-tech sounds awesome. mind you i still prefer the vris solenoids
get a b16 for it. v-tech sounds awesome. mind you i still prefer the vris solenoids
- Savin
- Regular Member
- Posts: 1580
- Joined: November 18th, 2007, 3:05 pm
- Location: Crown Point, IN (Chicago area)
- Contact:
Re: My 1.6 16v
Still waiting for pics of the MX flattened or shredded...*sigh*
Carnage pictures of any car is just cool as long as no one is hurt.
Carnage pictures of any car is just cool as long as no one is hurt.
'95 MX-3 RS - Project "Déjà Vu" Destined for the scrapyard.
'93 MX-3 GS - SOLD!
'93 MX-3 GS SE - Parts car!
'94 MX-3 GS - Scrapped
'94 MX-3 RS - Scrapped
'96 Sunfire SE - Scrapped
'03 Sunfire SE - Deathtrap
'95 Cavalier Base - Scrapped
'94 Thunderbird LX - Collects dust
'89 Mustang GT - SOLD!
'93 MX-3 GS - SOLD!
'93 MX-3 GS SE - Parts car!
'94 MX-3 GS - Scrapped
'94 MX-3 RS - Scrapped
'96 Sunfire SE - Scrapped
'03 Sunfire SE - Deathtrap
'95 Cavalier Base - Scrapped
'94 Thunderbird LX - Collects dust
'89 Mustang GT - SOLD!
- Josh
- Supporting Member
- Posts: 3432
- Joined: April 18th, 2002, 2:01 am
- Location: Washington state
- Contact:
Re: My 1.6 16v
Its a clean civic, throw some spacers in the rear and drop it 1.5" and you have it made.
Josh
95' AWD MX-3 RST - (work log - http://www.mx-3.com/phpBB3/viewtopic.php?f=46&t=73765 )
94' GS - KLZE DD (work log - viewtopic.php?uid=2713&f=46&t=79063&start=0 )
05' MS RX-8 - Parted out and Sold :'(
Feedback - http://www.mx-3.com/phpBB3/viewtopic.php?f=37&t=49519
Cardomain Page - http://www.cardomain.com/ride/408020
Face Book page http://www.facebook.com/pages/Mazda-MX- ... 3472959216
95' AWD MX-3 RST - (work log - http://www.mx-3.com/phpBB3/viewtopic.php?f=46&t=73765 )
94' GS - KLZE DD (work log - viewtopic.php?uid=2713&f=46&t=79063&start=0 )
05' MS RX-8 - Parted out and Sold :'(
Feedback - http://www.mx-3.com/phpBB3/viewtopic.php?f=37&t=49519
Cardomain Page - http://www.cardomain.com/ride/408020
Face Book page http://www.facebook.com/pages/Mazda-MX- ... 3472959216
-
- Regular Member
- Posts: 855
- Joined: October 8th, 2009, 12:36 pm
- antispam: No
- Location: United Kingdom
Re: My 1.6 16v
Drop it 4.5" more like
- DeadMaker
- Regular Member
- Posts: 457
- Joined: January 29th, 2010, 12:33 pm
- antispam: No
- Location: Greece
Re: My 1.6 16v
Really what exactly do you like in this car?Somehow it reminds me a bucket.But for sure you need to put some stickers on it..
Black Mazda Mx3 Rs 1997 B6DE
- Nd4SpdSe
- Senior Member
- Posts: 11212
- Joined: May 25th, 2002, 2:01 am
- Location: Québec City, Quebec, Canada
- Contact:
Re: My 1.6 16v
Hondas are no better for rust than Mazda's are. Both the Civics and Mx-3's are known for their rear quarter panel rust. Surprised you found one in that well of a condition.
As people and thinking their Mazda's are made by Ford, lol, well put Dan!
Ford Probe -> Mazda Mx-6
Ford Escort -> Mazda 323/Protege (91-03 Mazda Platform, in 97 Ford used their own motors)
Ford Laser/Meteor, Mercury Tracer -> Mazda 323/Protege
Ford Ranger -> Mazda B-Series (83-98)
Ford Escape -> Mazda Tribute (It's actually a modified Mazda 626 chassis running a Ford drivetrain until the Mazda MZR in '04)
Mazda CD3 Platform :
2003–present Mazda 6
2006–present Ford Fusion (CD338)
2006–present Lincoln Zephyr/MKZ (CD378)
2006–2011 Mercury Milan (CD338)
2007–present Mazda CX-9
2007–present Ford Edge crossover SUV (U338)
2007–present Lincoln MKX crossover SUV
But on the other end, there's Fords C1 platform, which is used on the very good and very successfully selling Mazda3 and how awesome the Escorts they have overseas:
http://en.wikipedia.org/wiki/Ford_C1_platform
As people and thinking their Mazda's are made by Ford, lol, well put Dan!
Ford Probe -> Mazda Mx-6
Ford Escort -> Mazda 323/Protege (91-03 Mazda Platform, in 97 Ford used their own motors)
Ford Laser/Meteor, Mercury Tracer -> Mazda 323/Protege
Ford Ranger -> Mazda B-Series (83-98)
Ford Escape -> Mazda Tribute (It's actually a modified Mazda 626 chassis running a Ford drivetrain until the Mazda MZR in '04)
Mazda CD3 Platform :
2003–present Mazda 6
2006–present Ford Fusion (CD338)
2006–present Lincoln Zephyr/MKZ (CD378)
2006–2011 Mercury Milan (CD338)
2007–present Mazda CX-9
2007–present Ford Edge crossover SUV (U338)
2007–present Lincoln MKX crossover SUV
But on the other end, there's Fords C1 platform, which is used on the very good and very successfully selling Mazda3 and how awesome the Escorts they have overseas:
http://en.wikipedia.org/wiki/Ford_C1_platform
The C platform was designed in the Ford development center at Europe Cologne, Germany, as the "C Technologies Program". It was said to be one of the largest platform programs in history at that time. Ford Focus, Volvo S40 and V50, and Mazda3 share about 60 percent of their parts and components. Thirty engineers each from Ford, Mazda, and Volvo worked in Cologne for two years to combine the compact car engineering for all three automakers under the direction of Ford Director of C Technologies Derrick Kuzak, Ford of Europe vice president of product development.
Among all of the cars, the floorpan is different, but the front- and rear-subframes, suspension, steering, braking, safety, and electrical components are shared.
2003 – Ford Focus C-Max (C214), first European vehicle on this platform
2004 – Mazda 3 (BK)
2005 – Ford Focus (International) (C307), (Note: the Ford Focus (North America) continues on the C170 platform through 2010)
2004 – Volvo S40 sedan (P11)
2004 – Volvo V50 station wagon (P12)
2006 – Mazda 5 (and related Ford i-Max)
2006 – Volvo C70 coupe/convertible (P15)
2007 – Volvo C30 (P14)
2008 – Ford Kuga (C394)
2009 – Mazda 3 (Note: the Mazda 3 continues on old C1)[2]
1992 Mazda Mx-3 GSR - 2.5L KLZE : Award Winning Show Car & Race Car ['02-'09] (Retired)
2004 Mazda RX-8 GT - Renesis Wankel : LS3 Coils, BHR Mid-Pipe + Falken RT-615K 245/40r18
2011 Mazda Mazda2 GS - 1.5L Manual : Yozora Edition (1 of 500)
2003 Nissan Xterra SE - 4x4 Supercharged : 2" Body Lift, 4" Suspension Lift & 33" MTR Kevlar
2001 Nissan Frontier SE - The Frontrailer : Expedition/Off-Road Trailer Project
2004 Mazda RX-8 GT - Renesis Wankel : LS3 Coils, BHR Mid-Pipe + Falken RT-615K 245/40r18
2011 Mazda Mazda2 GS - 1.5L Manual : Yozora Edition (1 of 500)
2003 Nissan Xterra SE - 4x4 Supercharged : 2" Body Lift, 4" Suspension Lift & 33" MTR Kevlar
2001 Nissan Frontier SE - The Frontrailer : Expedition/Off-Road Trailer Project
-
- Regular Member
- Posts: 39
- Joined: January 17th, 2009, 5:19 pm
- Location: Toronto Ontario Canada
Re: My 1.6 16v
lol....hondaboyz....make sure to paint it in different colors throw some crappy stickers on it cut the springs in half so you get the low look. And what do you have ? a cheap little family car that kids think its soooo cool.......HONDABOYZ........