weede`s KL-ZE Supercharger - Megasquirt
Re: 94" weede`s JDMstyle MX-3ZE
There were so many replies on this one I had to look, I'm glad I did. This IS the best looking mx-3 I've seen for years. Seats were a nice compliment to the color scheme aswell. Nice job.
1 mx6 88 LX auto 2.2l 4cyl
2 mx6 93 LS saved from junkyard SOLD
3 Mx6 96 M edition blow a ze part it
4 Mx6 96 gold LS paint n lights auto SOLD
5 mx6 red fresh paint clean, sold
1 mx3 92rs sohc auto rota c8s h&r
2 mx3 93 gsze bought w/ mods
3 mx3 93 GSze mtx swp act stg3 str8 nek im eibach kl36
4 mx3 GS SOLD-
6 mx3 white gs jdm swap'd SOLD
*5th mx3 blk GS clean title modded DD*
1 PGT 97 blk, garaged clean sold
2 pgt primered 5 spd KL SOLD
2 mx6 93 LS saved from junkyard SOLD
3 Mx6 96 M edition blow a ze part it
4 Mx6 96 gold LS paint n lights auto SOLD
5 mx6 red fresh paint clean, sold
1 mx3 92rs sohc auto rota c8s h&r
2 mx3 93 gsze bought w/ mods
3 mx3 93 GSze mtx swp act stg3 str8 nek im eibach kl36
4 mx3 GS SOLD-
6 mx3 white gs jdm swap'd SOLD
*5th mx3 blk GS clean title modded DD*
1 PGT 97 blk, garaged clean sold
2 pgt primered 5 spd KL SOLD
-
- Regular Member
- Posts: 155
- Joined: August 7th, 2010, 11:03 am
- antispam: ~SPAM*SUX~
- racycle
- Regular Member
- Posts: 283
- Joined: September 7th, 2010, 3:01 pm
- antispam: ~SPAM*SUX~
- Location: Boykins Va
Re: 94" weede`s JDMstyle MX-3ZE
The first pic with the drop in the front looks unsafe haha. Looks as if you take that turn a little faster and sharper and bye bye lip. ![Razz :P](./images/smilies/icon_razz.gif)
![Razz :P](./images/smilies/icon_razz.gif)
racycle's Worklog!
viewtopic.php?f=46&t=76991 -RIP
Current Toy
http://mx-3.com/phpBB3/viewtopic.php?f=7&t=80470
Please don't tap on the hood. It disturbs the gerbils.
-
- Regular Member
- Posts: 155
- Joined: August 7th, 2010, 11:03 am
- antispam: ~SPAM*SUX~
Re: 94" weede`s JDMstyle MX-3ZE
It`s high time to add some power for mazda ![Wink ;)](./images/smilies/icon_wink.gif)
Millenia S rods:
![Image](http://img269.imageshack.us/img269/7858/korbyu.jpg)
Fuel regulator:
![Image](http://img685.imageshack.us/img685/7803/regulatort.jpg)
Millenia S 280cc injectors (will be working with 3,5 - 4bar on rail)
![Image](http://img811.imageshack.us/img811/2066/wtryski.jpg)
And more:
- walbro 190 fuel pomp
- anodised fuel rail
- new rubber for injetctors
- custom fuel rail adapter
first tests:
![Image](http://img11.imageshack.us/img11/7783/pitgarage.jpg)
![Image](http://img197.imageshack.us/img197/8162/pitgarage2.jpg)
PS. I thing will be supercharged, but now i buying parts whitch its needed for charging at all.
![Wink ;)](./images/smilies/icon_wink.gif)
Millenia S rods:
![Image](http://img269.imageshack.us/img269/7858/korbyu.jpg)
Fuel regulator:
![Image](http://img685.imageshack.us/img685/7803/regulatort.jpg)
Millenia S 280cc injectors (will be working with 3,5 - 4bar on rail)
![Image](http://img811.imageshack.us/img811/2066/wtryski.jpg)
And more:
- walbro 190 fuel pomp
- anodised fuel rail
- new rubber for injetctors
- custom fuel rail adapter
first tests:
![Image](http://img11.imageshack.us/img11/7783/pitgarage.jpg)
![Image](http://img197.imageshack.us/img197/8162/pitgarage2.jpg)
PS. I thing will be supercharged, but now i buying parts whitch its needed for charging at all.
- Vecia
- Regular Member
- Posts: 317
- Joined: August 1st, 2010, 10:26 am
- antispam: ~SPAM*SUX~
- Location: Texas, USA
- Contact:
Re: 94" weede`s JDMstyle MX-3ZE
This car is deluxe man. White looks so bad-a-- on the MX-3.
- AaronTietje
- Regular Member
- Posts: 1196
- Joined: August 21st, 2009, 5:24 pm
- antispam: No
- Location: Prattsburgh NY
Re: 94" weede`s JDMstyle MX-3ZE
So, Is that your mazda stable or a friends? The car looks great BTW.
We all want to be fast and look cool. Cool changes but fast never does.
Re: 94" weede`s JDMstyle MX-3ZE
lol its like a mazda dream garage
93 GS SE - Raspberry metallic. K8 - 2 1/4in exhaust w/Magnaflow street series muffler, Custom intake, Kyb Gr2's w/Apex springs, Full kenwood audio - SOLD
-
- Regular Member
- Posts: 155
- Joined: August 7th, 2010, 11:03 am
- antispam: ~SPAM*SUX~
Re: 94" weede`s JDMstyle MX-3ZE
my is of course only mx-3, mx5 and rx7 are friends of mine:
rx7 ~500hp
mx5 with mazdaspeed exterior ~300hp
rx7 ~500hp
mx5 with mazdaspeed exterior ~300hp
Re: 94" weede`s JDMstyle MX-3ZE
Any updates with those new rods, afpr?
-
- Regular Member
- Posts: 155
- Joined: August 7th, 2010, 11:03 am
- antispam: ~SPAM*SUX~
Re: 94" weede`s JDMstyle MX-3ZE
Soon i will add more info - i`m preparing big brake kit and gearbox, whitch handles much more power ![Wink ;)](./images/smilies/icon_wink.gif)
![Wink ;)](./images/smilies/icon_wink.gif)
-
- Regular Member
- Posts: 155
- Joined: August 7th, 2010, 11:03 am
- antispam: ~SPAM*SUX~
Re: 94" weede`s JDMstyle MX-3ZE
Next chapter with big brake kit - still nothing
I found great rotor 294mm 22th, height 44mm, hole 67mm, 4x100mm and i bought it to check fitting with rx7 caliper with mx-3 spindle and...
![Image](http://img810.imageshack.us/img810/1238/24124701.jpg)
![Image](http://img684.imageshack.us/img684/1104/26873704.jpg)
![Image](http://img508.imageshack.us/img508/7499/81857777.jpg)
![Image](http://img64.imageshack.us/img64/6381/21360803.jpg)
everything would be fine, but brake pads are too big...grr
i`ll try to check with 323 v6 spindle.
Bonus photo
:
Nice saturday in garage:
![Image](http://img560.imageshack.us/img560/1015/44230846.jpg)
...BEGI turbo kit to MX-5 NC
![Image](http://img846.imageshack.us/img846/120/78251107.jpg)
and monster rx-7:
![Image](http://img15.imageshack.us/img15/3708/98973343.jpg)
![Image](http://img684.imageshack.us/img684/5834/46827527.jpg)
Stay tuned.
I found great rotor 294mm 22th, height 44mm, hole 67mm, 4x100mm and i bought it to check fitting with rx7 caliper with mx-3 spindle and...
![Image](http://img810.imageshack.us/img810/1238/24124701.jpg)
![Image](http://img684.imageshack.us/img684/1104/26873704.jpg)
![Image](http://img508.imageshack.us/img508/7499/81857777.jpg)
![Image](http://img64.imageshack.us/img64/6381/21360803.jpg)
everything would be fine, but brake pads are too big...grr
![Wink ;)](./images/smilies/icon_wink.gif)
Bonus photo
![Cool 8)](./images/smilies/icon_cool.gif)
Nice saturday in garage:
![Image](http://img560.imageshack.us/img560/1015/44230846.jpg)
...BEGI turbo kit to MX-5 NC
![Image](http://img846.imageshack.us/img846/120/78251107.jpg)
and monster rx-7:
![Image](http://img15.imageshack.us/img15/3708/98973343.jpg)
![Image](http://img684.imageshack.us/img684/5834/46827527.jpg)
Stay tuned.
- bbunkerc397
- Regular Member
- Posts: 585
- Joined: February 1st, 2010, 6:04 pm
- antispam: No
- Location: Markham
- Contact:
Re: 94" weede`s JDMstyle MX-3ZE
Holy s---... Tile floor... Sweet... Love the Mazdas
1996 MX-3 KL-ZE with Eunos 800 IM, factory side skirts,. "Owner since 2001 my 14th year"
1992 929s 20B-REW Lowered, 17" chrome Millenia rims, custom black interior. "13th Owner 9th year"
2006 Chevy HHR LT "Bought Brand New - East Side Chevy" Sold to my Dad
1992 929s 20B-REW Lowered, 17" chrome Millenia rims, custom black interior. "13th Owner 9th year"
2006 Chevy HHR LT "Bought Brand New - East Side Chevy" Sold to my Dad
-
- Regular Member
- Posts: 155
- Joined: August 7th, 2010, 11:03 am
- antispam: ~SPAM*SUX~
Re: 94" weede`s JDMstyle MX-3ZE
Brakes PART II
I bought 323 2.0 v6 spindle.
Few minutes later...
![Image](http://img683.imageshack.us/img683/8634/52609077.jpg)
Of course hub from 4 and 5 struds are the same so change it takes 30seconds but we should replace also bearing![Wink ;)](./images/smilies/icon_wink.gif)
other side (without stronger fitment)
![Image](http://img847.imageshack.us/img847/4905/11622836.jpg)
![Image](http://img856.imageshack.us/img856/5789/51584498.jpg)
Bigger problem - rotor is about 8-10mm from spindle.
![Image](http://img703.imageshack.us/img703/3479/62254669.jpg)
But...I checked also with Mazda 6 caliper and it would be much easier to fit 286mm Mazda 6 rotor with caliper. Everething is plug & play.
![Image](http://img4.imageshack.us/img4/5559/66001446.jpg)
We will see...![Wink ;)](./images/smilies/icon_wink.gif)
And moooore Mazdas![Wink ;)](./images/smilies/icon_wink.gif)
![Image](http://img690.imageshack.us/img690/2511/83677591.jpg)
![Very Happy :D](./images/smilies/icon_biggrin.gif)
I bought 323 2.0 v6 spindle.
Few minutes later...
![Image](http://img683.imageshack.us/img683/8634/52609077.jpg)
Of course hub from 4 and 5 struds are the same so change it takes 30seconds but we should replace also bearing
![Wink ;)](./images/smilies/icon_wink.gif)
other side (without stronger fitment)
![Image](http://img847.imageshack.us/img847/4905/11622836.jpg)
![Image](http://img856.imageshack.us/img856/5789/51584498.jpg)
Bigger problem - rotor is about 8-10mm from spindle.
![Image](http://img703.imageshack.us/img703/3479/62254669.jpg)
But...I checked also with Mazda 6 caliper and it would be much easier to fit 286mm Mazda 6 rotor with caliper. Everething is plug & play.
![Image](http://img4.imageshack.us/img4/5559/66001446.jpg)
We will see...
![Wink ;)](./images/smilies/icon_wink.gif)
And moooore Mazdas
![Wink ;)](./images/smilies/icon_wink.gif)
![Image](http://img690.imageshack.us/img690/2511/83677591.jpg)
- WhiteFinish
- Regular Member
- Posts: 1635
- Joined: April 3rd, 2006, 9:48 am
- Location: Netherlands
- Contact:
Re: 94" weede`s JDMstyle MX-3ZE
Great pictures and good experimenting !!
I agree; most epic garage ever !! I wish I had one like it![Welder :welder:](./images/smilies/welder.gif)
I agree; most epic garage ever !! I wish I had one like it
![Welder :welder:](./images/smilies/welder.gif)