Need Tip's on Cleaning A Intake Manifold

cWs306 · Post by **cWs306** » April 12th, 2011, 8:08 am

hey, how would i go about cleaning the inside of my intake manifold? since some places u just cant reach with a bent close hanger or anything.. thanks alot!

muttpower · Post by **muttpower** » April 12th, 2011, 8:33 am

Acid porting works nice....or just get it hot tanked

cWs306 · Post by **cWs306** » April 12th, 2011, 5:10 pm

you can't hot tank aluminum.. if you could i wouldnt be asking how to clean it lol.

cWs306 · Post by **cWs306** » April 12th, 2011, 5:13 pm

but thanks for the acid porting idea, gunna look into that.

muttpower · Post by **muttpower** » April 12th, 2011, 7:50 pm

cWs306 wrote:you can't hot tank aluminum.. if you could i wouldnt be asking how to clean it lol.

Ummmm

...yeah, actually you can...just depends on the hot tank cleaning solution the shop is using...there are aluminum safe cleaners out there, but not many shops use em...which I don't see why, saying as most modern engine parts are being cast in aluminum

Here's an example: http://www.lyndist.com/aluminum_safe_ho ... leaner.htm

cWs306 · Post by **cWs306** » April 13th, 2011, 2:13 am

yes thats true... i did some reading on it earlier got it figured out. i just got told by the shops around my city that they couldnt do it.

MX-3.com

Need Tip's on Cleaning A Intake Manifold

Need Tip's on Cleaning A Intake Manifold

Re: Need Tip's on Cleaning A Intake Manifold

Re: Need Tip's on Cleaning A Intake Manifold

Re: Need Tip's on Cleaning A Intake Manifold

Re: Need Tip's on Cleaning A Intake Manifold

Re: Need Tip's on Cleaning A Intake Manifold