WTB: Headers for 1.8 V6

gsemex3 · Post by **gsemex3** » March 5th, 2004, 8:41 pm

As the topic says. Let me know. Thanks.

mrspanky79 · Post by **mrspanky79** » March 6th, 2004, 3:37 am

well if you want to travel to the toronto area i have 2 sets you can pick from

gsemex3 · Post by **gsemex3** » March 7th, 2004, 8:41 am

mrspanky79, pm sent.

gsemex3 · Post by **gsemex3** » March 11th, 2004, 10:48 pm

babyblueMX3 · Post by **babyblueMX3** » March 12th, 2004, 9:22 am

ask Pat on this board..he can get some for you for really cheap

Post by **Custommx3** » March 12th, 2004, 10:54 am

u saying they make some specifically for our cars? or r u referring to the $150 ebay 2.5L ones

<small>[ March 12, 2004, 09:55 AM: Message edited by: Custommx3 ]</small>

Street-Import · Post by **Street-Import** » March 12th, 2004, 3:15 pm

I am an authorized dealer for OBX, they made a new design exactly the same as the hotshot.

<img src="http://www.digitalcreation.ca/misc/New_ ... eaders.jpg" alt=" - " />

They are sending us 2 set as sample to test them out and describe the installation procress / problems. Then they will make the final changes and mass produce them.

They will be completly made of stainless steel, with a built in flex pipe and fully bolt-on designed especially for the Mazda Mx-3 V6 K8 or any engine of the K series (KLZE, KL03, KFZE...)

Check our our site www.street-import.com we should have them in stock within a few weeks. The cheap ones are being discontinued, thats why nobody is selling them anymore. They had a few problems (O2 sensor wrong location) and a few things. Those new headers are the bomb, sound nice, look good, and add many ponies.

mitmaks · Post by **mitmaks** » March 12th, 2004, 3:22 pm

and theyre gonna be more expensive too huh? I want some headers, keep me in mind

btw what diameter those are, theyre direct bolt in right?

<small>[ March 12, 2004, 02:25 PM: Message edited by: mitmaks ]</small>

gsemex3 · Post by **gsemex3** » March 12th, 2004, 3:51 pm

Thanks for your replies folks. Will get in touch with Pat.

But if anyone decides to sell one lying around or extra. Let me know.

Pat, will send pm shortly.

Postman2K · Post by **Postman2K** » March 26th, 2004, 1:17 am

Originally posted by gsemex3:
Thanks for your replies folks. Will get in touch with Pat.

But if anyone decides to sell one lying around or extra. Let me know.

Pat, will send pm shortly.

hey man, i recently purchased a set of the discontinued OBX ones. and then a 2 weeks later, saw the new ones. if ur interested, i can sell u my set, so then i can buy the new ones. email me, let me know what u think.

bonus - i can personally deliver them to u, my first semester @ Sheridan is over soon, so i will be in Ottawa between April 16th and May 3rd.

Steeb · Post by **Steeb** » March 26th, 2004, 3:51 am

they are the "new" ebay ones. i saw they were 300 when they were re-released on ebay. if pat can hook it up for better than 300 thats definately a deal.

gsemex3 · Post by **gsemex3** » March 26th, 2004, 10:58 pm

Postman2k, I'll probably go with the new bolt-on headers; saves a lot of time and labor charges if I go this way. Thanks.

MX-3.com

WTB: Headers for 1.8 V6

WTB: Headers for 1.8 V6

Re: WTB: Headers for 1.8 V6

Re: WTB: Headers for 1.8 V6

Re: WTB: Headers for 1.8 V6

Re: WTB: Headers for 1.8 V6

Re: WTB: Headers for 1.8 V6

Re: WTB: Headers for 1.8 V6

Re: WTB: Headers for 1.8 V6

Re: WTB: Headers for 1.8 V6

Re: WTB: Headers for 1.8 V6

Re: WTB: Headers for 1.8 V6

Re: WTB: Headers for 1.8 V6