WTB: Headers for 1.8 V6
WTB: Headers for 1.8 V6
As the topic says. Let me know. Thanks.
- mrspanky79
- Regular Member
- Posts: 575
- Joined: October 2nd, 2001, 2:01 am
- Location: Keswick , Ontario, Canada
- Contact:
Re: WTB: Headers for 1.8 V6
well if you want to travel to the toronto area i have 2 sets you can pick from
War does not determine who is right, war determine who is left!
94 mx3 GSX Stroked Turbo'd and Intercooled
99 vitara 4x4
94 mx3 GSX Stroked Turbo'd and Intercooled
99 vitara 4x4
Re: WTB: Headers for 1.8 V6
mrspanky79, pm sent.
- babyblueMX3
- Supporting Member
- Posts: 3755
- Joined: February 23rd, 2003, 2:01 am
- Location: Gatineau,Quebec,Canada
- Contact:
Re: WTB: Headers for 1.8 V6
ask Pat on this board..he can get some for you for really cheap
RIP 400whp ZE-T MX-3
Current car : Golf 01 GTI 1.8T (15 psi)
Current car : Golf 01 GTI 1.8T (15 psi)
- Custommx3
- Site Administrator
- Posts: 8391
- Joined: November 7th, 2000, 2:01 am
- antispam: ~SPAM*SUX~
- Location: Lat 35.1N Lon -90W
- Contact:
Re: WTB: Headers for 1.8 V6
u saying they make some specifically for our cars? or r u referring to the $150 ebay 2.5L ones
<small>[ March 12, 2004, 09:55 AM: Message edited by: Custommx3 ]</small>
<small>[ March 12, 2004, 09:55 AM: Message edited by: Custommx3 ]</small>
-
- Supporting Member
- Posts: 338
- Joined: June 9th, 2003, 2:01 am
- Location: Quebec
- Contact:
Re: WTB: Headers for 1.8 V6
I am an authorized dealer for OBX, they made a new design exactly the same as the hotshot.
<img src="http://www.digitalcreation.ca/misc/New_ ... eaders.jpg" alt=" - " />
They are sending us 2 set as sample to test them out and describe the installation procress / problems. Then they will make the final changes and mass produce them.
They will be completly made of stainless steel, with a built in flex pipe and fully bolt-on designed especially for the Mazda Mx-3 V6 K8 or any engine of the K series (KLZE, KL03, KFZE...)
Check our our site www.street-import.com we should have them in stock within a few weeks. The cheap ones are being discontinued, thats why nobody is selling them anymore. They had a few problems (O2 sensor wrong location) and a few things. Those new headers are the bomb, sound nice, look good, and add many ponies.
<img src="http://www.digitalcreation.ca/misc/New_ ... eaders.jpg" alt=" - " />
They are sending us 2 set as sample to test them out and describe the installation procress / problems. Then they will make the final changes and mass produce them.
They will be completly made of stainless steel, with a built in flex pipe and fully bolt-on designed especially for the Mazda Mx-3 V6 K8 or any engine of the K series (KLZE, KL03, KFZE...)
Check our our site www.street-import.com we should have them in stock within a few weeks. The cheap ones are being discontinued, thats why nobody is selling them anymore. They had a few problems (O2 sensor wrong location) and a few things. Those new headers are the bomb, sound nice, look good, and add many ponies.
- mitmaks
- Senior Member
- Posts: 8704
- Joined: September 10th, 2001, 2:01 am
- antispam: ~SPAM*SUX~
- Location: Spokane, WA
- Contact:
Re: WTB: Headers for 1.8 V6
and theyre gonna be more expensive too huh? I want some headers, keep me in mind
btw what diameter those are, theyre direct bolt in right?
<small>[ March 12, 2004, 02:25 PM: Message edited by: mitmaks ]</small>
btw what diameter those are, theyre direct bolt in right?
<small>[ March 12, 2004, 02:25 PM: Message edited by: mitmaks ]</small>
Magnum s/s lines, strut bars, carbon fiber bezel, indiglow gauge, Sony Xplod, inverted c/f hood, SRD lower tie bar '93 GS SE '95 Cobra SVT #2722 '68 Charger R/T 440
http://www.cardomain.com/id/mitmaks
http://www.cardomain.com/id/mitmaks
Re: WTB: Headers for 1.8 V6
Thanks for your replies folks. Will get in touch with Pat.
But if anyone decides to sell one lying around or extra. Let me know.
Pat, will send pm shortly.
But if anyone decides to sell one lying around or extra. Let me know.
Pat, will send pm shortly.
-
- Regular Member
- Posts: 759
- Joined: December 12th, 2000, 2:01 am
- Location: Ottawa, Ontario, Canada
Re: WTB: Headers for 1.8 V6
hey man, i recently purchased a set of the discontinued OBX ones. and then a 2 weeks later, saw the new ones. if ur interested, i can sell u my set, so then i can buy the new ones. email me, let me know what u think.Originally posted by gsemex3:
Thanks for your replies folks. Will get in touch with Pat.
But if anyone decides to sell one lying around or extra. Let me know.
Pat, will send pm shortly.
bonus - i can personally deliver them to u, my first semester @ Sheridan is over soon, so i will be in Ottawa between April 16th and May 3rd.
2007 Mazda3 GT Hatchback (Phantom Blue Mica) - DAILY DRIVER
2004 Mazda3 GT Hatchback (Passion Lava Orange) - FOR SALE
1994 Mazda Mx-3 GS (Laguna Blue) - RETIRED/JUNKED
1995 Mazda Mx-3 RS (Dark blue) - SOLD
2004 Mazda3 GT Hatchback (Passion Lava Orange) - FOR SALE
1994 Mazda Mx-3 GS (Laguna Blue) - RETIRED/JUNKED
1995 Mazda Mx-3 RS (Dark blue) - SOLD
Re: WTB: Headers for 1.8 V6
they are the "new" ebay ones. i saw they were 300 when they were re-released on ebay. if pat can hook it up for better than 300 thats definately a deal.
Re: WTB: Headers for 1.8 V6
Postman2k, I'll probably go with the new bolt-on headers; saves a lot of time and labor charges if I go this way. Thanks.