Hi there
Searching the forum i've found info about the intake hose cracked, mine is also cracked, so i guess is causing my rough idle...
I want to replace with a kit (i've seen the ford probe kit, prelude...) wich is better?
And the most important thing for me: what do I do with the 2 hoses that leads the intake hose.
Thanks in advance.
The best solution to replace stock intake rubber hose craked
-
- Regular Member
- Posts: 59
- Joined: June 29th, 2009, 5:20 am
- antispam: No
- Location: France
- Contact:
Re: The best solution to replace stock intake rubber hose cr
corksport makes a stainless header, is it what you need ?
Re: The best solution to replace stock intake rubber hose cr
Not the heather, just the rubber tube from the air mass meter to the throttle body.
- Ryan
- Senior Member
- Posts: 7198
- Joined: April 7th, 2008, 1:06 pm
- antispam: ~SPAM*SUX~
- Location: Manitoba
Re: The best solution to replace stock intake rubber hose cr
I have a spare intake hose.... or you can buy a cold air intake of some sort, I think thats what you're wanting.
All the one's I've made were custom...
All the one's I've made were custom...
Now with Moderator power!
Black '93 BP RS - wrecked, parted, scrapped.
Green GS - Sold.
Black GS - Summer DD/Race car - Fancy KLZE
Red GS - K8-ATX -> MTX-KLDE - Frakencar. Scrapped
White GS - Rusty. Parts. Scrapped
1997 BMW M3 - my summer baby
2002 BMW 325Xi - sold
2003 Forester Xti - EJ20K swapped.
Feedback
Black '93 BP RS - wrecked, parted, scrapped.
Green GS - Sold.
Black GS - Summer DD/Race car - Fancy KLZE
Red GS - K8-ATX -> MTX-KLDE - Frakencar. Scrapped
White GS - Rusty. Parts. Scrapped
1997 BMW M3 - my summer baby
2002 BMW 325Xi - sold
2003 Forester Xti - EJ20K swapped.
Feedback
- DeepBlueMX3
- Regular Member
- Posts: 373
- Joined: September 13th, 2008, 9:02 pm
- Location: City:Americana Country:Brazil
- Contact:
Re: The best solution to replace stock intake rubber hose cr
A friend of mine, here in Brazil, did this intake with silicon hoses and stainless tubes;
Re: The best solution to replace stock intake rubber hose cr
Ok, thanks
But do i have to connect the 2 hoses (from valve cover and from TB) in it?
But do i have to connect the 2 hoses (from valve cover and from TB) in it?
- DeepBlueMX3
- Regular Member
- Posts: 373
- Joined: September 13th, 2008, 9:02 pm
- Location: City:Americana Country:Brazil
- Contact:
Re: The best solution to replace stock intake rubber hose cr
-Yeap, you must have.ut0pia wrote:Ok, thanks
But do i have to connect the 2 hoses (from valve cover and from TB) in it?
- Evo_Spec
- Senior Member
- Posts: 2504
- Joined: December 30th, 2008, 3:41 am
- Location: Calgary, Alberta, Canada
Re: The best solution to replace stock intake rubber hose cr
well the one from the valve cover you can put on a small filter if you wantut0pia wrote:Ok, thanks
But do i have to connect the 2 hoses (from valve cover and from TB) in it?
like this:
(yes this is mi|<e's car if anyone askes)