[FS] 1 megasquirt that someone should buy!
[FS] 1 megasquirt that someone should buy!
hello to all
i have one megasuirt im wanting to get rid of. im simply not happy with it and would like a haltech so im willing to let this go.
up first is a ms2 v3.0 - $250 + ship -SOLD
this ms unit should have all the jumpers for a b series engine and will come pretuned for a 323 gtx. it also has the Bosch driver coil so you can run neg side coil trigger. i replaced the red lights on the unit with white ones, they were ugly, and added a fan because its hot where i live. this unit also comes with a super cool black case. the unit was "installed" but i never drove the car so really it had no constant stress on it.
i will also throw in the serial adapter and part of a harness i was going to make to run the serial connection to the center console - FREE!
next up is a ms1 v3.0 - 160 + ship
this unit has a ms1 cpu but has a "interchange" socket so a ms2 daughter board can be installed and comes with the Bosch driver coil and white leds like above. There was a ground fault and it burned a lead but i jumped the lead and tested the module with both my laptop and the stim and the unit is fine, just cosmetically damaged. if it pleases the buyer ill solder the wire directly from point to point. there was also a lead that simply broke of when soldering so i had to jump at particular diode to a transistor. other than these two problems the board should be in really good order. this unit does not come with a case.
for the standard retail price of these units please visits the site below
http://www.diyautotune.com/catalog/mega ... f865723b37" onclick="window.open(this.href);return false;
http://www.diyautotune.com/catalog/mega ... -c-27.html" onclick="window.open(this.href);return false;
i have one megasuirt im wanting to get rid of. im simply not happy with it and would like a haltech so im willing to let this go.
up first is a ms2 v3.0 - $250 + ship -SOLD
this ms unit should have all the jumpers for a b series engine and will come pretuned for a 323 gtx. it also has the Bosch driver coil so you can run neg side coil trigger. i replaced the red lights on the unit with white ones, they were ugly, and added a fan because its hot where i live. this unit also comes with a super cool black case. the unit was "installed" but i never drove the car so really it had no constant stress on it.
i will also throw in the serial adapter and part of a harness i was going to make to run the serial connection to the center console - FREE!
next up is a ms1 v3.0 - 160 + ship
this unit has a ms1 cpu but has a "interchange" socket so a ms2 daughter board can be installed and comes with the Bosch driver coil and white leds like above. There was a ground fault and it burned a lead but i jumped the lead and tested the module with both my laptop and the stim and the unit is fine, just cosmetically damaged. if it pleases the buyer ill solder the wire directly from point to point. there was also a lead that simply broke of when soldering so i had to jump at particular diode to a transistor. other than these two problems the board should be in really good order. this unit does not come with a case.
for the standard retail price of these units please visits the site below
http://www.diyautotune.com/catalog/mega ... f865723b37" onclick="window.open(this.href);return false;
http://www.diyautotune.com/catalog/mega ... -c-27.html" onclick="window.open(this.href);return false;
Last edited by 4gotn on October 8th, 2010, 12:10 pm, edited 2 times in total.
1994 MX-3 1.6L B6DE 16v DOHC - rear disc swap, nix power steering/ac, Corksport f&r strut tower bars, Pedders urethane control arm bushings, urethane motor mounts, steel braided brake lines, painted dash, protege tranny
90 Miata w/ b6, Konig Lightspeed rims, Cams (boost to come soon)
74 Porsche 914 w/ 1.8L - restoration prooject
90 Miata w/ b6, Konig Lightspeed rims, Cams (boost to come soon)
74 Porsche 914 w/ 1.8L - restoration prooject
Re: [FS] 2 megasquirts
i can be a little flexable on my prices if need be
oh and fyi if your in the states shipping will be like $5-7
oh and fyi if your in the states shipping will be like $5-7
1994 MX-3 1.6L B6DE 16v DOHC - rear disc swap, nix power steering/ac, Corksport f&r strut tower bars, Pedders urethane control arm bushings, urethane motor mounts, steel braided brake lines, painted dash, protege tranny
90 Miata w/ b6, Konig Lightspeed rims, Cams (boost to come soon)
74 Porsche 914 w/ 1.8L - restoration prooject
90 Miata w/ b6, Konig Lightspeed rims, Cams (boost to come soon)
74 Porsche 914 w/ 1.8L - restoration prooject
Re: [FS] 2 megasquirts
anyone even interested?
i need to let these go
shoot me an offer
if its reasonable ill accept
i need to let these go
shoot me an offer
if its reasonable ill accept
1994 MX-3 1.6L B6DE 16v DOHC - rear disc swap, nix power steering/ac, Corksport f&r strut tower bars, Pedders urethane control arm bushings, urethane motor mounts, steel braided brake lines, painted dash, protege tranny
90 Miata w/ b6, Konig Lightspeed rims, Cams (boost to come soon)
74 Porsche 914 w/ 1.8L - restoration prooject
90 Miata w/ b6, Konig Lightspeed rims, Cams (boost to come soon)
74 Porsche 914 w/ 1.8L - restoration prooject
Re: [FS] 2 megasquirts that someone should buy!
bumpity bump
1994 MX-3 1.6L B6DE 16v DOHC - rear disc swap, nix power steering/ac, Corksport f&r strut tower bars, Pedders urethane control arm bushings, urethane motor mounts, steel braided brake lines, painted dash, protege tranny
90 Miata w/ b6, Konig Lightspeed rims, Cams (boost to come soon)
74 Porsche 914 w/ 1.8L - restoration prooject
90 Miata w/ b6, Konig Lightspeed rims, Cams (boost to come soon)
74 Porsche 914 w/ 1.8L - restoration prooject
-
- Senior Member
- Posts: 5554
- Joined: August 25th, 2004, 2:01 am
- Location: Edmonton, Alberta, Canada
Re: [FS] 2 megasquirts that someone should buy!
If they were V6 boards I would have bought one already.
94' RS/GS/MS/CF Monster Turbo...coming soon.
93' GS SE, the Black Beast, the former love of my life...soon to be gutted and crushed.
94' GS, black on black, now in several small pieces...and one large crushed piece.
2007 Mazda3 GT Sport --- super fun
2004 Honda RC51 --- Lost forever to some theavin' bastard
My Worklog
My feedback thread
Never attribute to malice that which can be adequately explained by stupidity.
93' GS SE, the Black Beast, the former love of my life...soon to be gutted and crushed.
94' GS, black on black, now in several small pieces...and one large crushed piece.
2007 Mazda3 GT Sport --- super fun
2004 Honda RC51 --- Lost forever to some theavin' bastard
My Worklog
My feedback thread
Never attribute to malice that which can be adequately explained by stupidity.
- Mooneggs
- Forum Moderator
- Posts: 6128
- Joined: August 10th, 2005, 10:08 pm
- antispam: ~SPAM*SUX~
- Location: Hillsboro, OR
- Contact:
Re: [FS] 2 megasquirts that someone should buy!
yeah me toowytbishop wrote:If they were V6 boards I would have bought one already.
My Feedback
92 mx-3 gs klze 'race car' IP 15.05 @ 92.5mph
92 mx-3 gs klze 'daily driver' IP 14.55 @ 95.7mph
http://www.cardomain.com/id/Mooneggs
92 mx-3 gs klze 'race car' IP 15.05 @ 92.5mph
92 mx-3 gs klze 'daily driver' IP 14.55 @ 95.7mph
http://www.cardomain.com/id/Mooneggs
Re: [FS] 2 megasquirts that someone should buy!
they can be adjusted to a v6 in about an hour....
they need to be set to two channels being as you have two sets of injectors and a few other timing/ignition tweeks need be done so it will fire on all six....
these are not for one specific model engine. these are universal. in fact the ms1 is a piggyback that usually only controls fuel but can control ignition.
they need to be set to two channels being as you have two sets of injectors and a few other timing/ignition tweeks need be done so it will fire on all six....
these are not for one specific model engine. these are universal. in fact the ms1 is a piggyback that usually only controls fuel but can control ignition.
1994 MX-3 1.6L B6DE 16v DOHC - rear disc swap, nix power steering/ac, Corksport f&r strut tower bars, Pedders urethane control arm bushings, urethane motor mounts, steel braided brake lines, painted dash, protege tranny
90 Miata w/ b6, Konig Lightspeed rims, Cams (boost to come soon)
74 Porsche 914 w/ 1.8L - restoration prooject
90 Miata w/ b6, Konig Lightspeed rims, Cams (boost to come soon)
74 Porsche 914 w/ 1.8L - restoration prooject
-
- Senior Member
- Posts: 5554
- Joined: August 25th, 2004, 2:01 am
- Location: Edmonton, Alberta, Canada
Re: [FS] 2 megasquirts that someone should buy!
Dibs on the V3 board!
Sending you a PM.
Sending you a PM.
94' RS/GS/MS/CF Monster Turbo...coming soon.
93' GS SE, the Black Beast, the former love of my life...soon to be gutted and crushed.
94' GS, black on black, now in several small pieces...and one large crushed piece.
2007 Mazda3 GT Sport --- super fun
2004 Honda RC51 --- Lost forever to some theavin' bastard
My Worklog
My feedback thread
Never attribute to malice that which can be adequately explained by stupidity.
93' GS SE, the Black Beast, the former love of my life...soon to be gutted and crushed.
94' GS, black on black, now in several small pieces...and one large crushed piece.
2007 Mazda3 GT Sport --- super fun
2004 Honda RC51 --- Lost forever to some theavin' bastard
My Worklog
My feedback thread
Never attribute to malice that which can be adequately explained by stupidity.
Re: [FS] 2 megasquirts that someone should buy!
mlody1921 pmd first so let me get an answer out of him
wytbishop is second in line
im allowing for a one day buffer...if someone makes an offer and i do not hear from the previous person for 24 hours, to be fair, Ill move on to the next whos interested
btw the ms1 is the same as the ms2 with the exception of the case and the ms2 board. both should run you around $100
wytbishop is second in line
im allowing for a one day buffer...if someone makes an offer and i do not hear from the previous person for 24 hours, to be fair, Ill move on to the next whos interested
btw the ms1 is the same as the ms2 with the exception of the case and the ms2 board. both should run you around $100
1994 MX-3 1.6L B6DE 16v DOHC - rear disc swap, nix power steering/ac, Corksport f&r strut tower bars, Pedders urethane control arm bushings, urethane motor mounts, steel braided brake lines, painted dash, protege tranny
90 Miata w/ b6, Konig Lightspeed rims, Cams (boost to come soon)
74 Porsche 914 w/ 1.8L - restoration prooject
90 Miata w/ b6, Konig Lightspeed rims, Cams (boost to come soon)
74 Porsche 914 w/ 1.8L - restoration prooject
Re: [FS] 2 megasquirts that someone should buy!
well the boards are still up for grabs atm
just pm me if your interested...
it may take a few days for me to get back due to school but ill respond
just pm me if your interested...
it may take a few days for me to get back due to school but ill respond
1994 MX-3 1.6L B6DE 16v DOHC - rear disc swap, nix power steering/ac, Corksport f&r strut tower bars, Pedders urethane control arm bushings, urethane motor mounts, steel braided brake lines, painted dash, protege tranny
90 Miata w/ b6, Konig Lightspeed rims, Cams (boost to come soon)
74 Porsche 914 w/ 1.8L - restoration prooject
90 Miata w/ b6, Konig Lightspeed rims, Cams (boost to come soon)
74 Porsche 914 w/ 1.8L - restoration prooject