[FS] 1 megasquirt that someone should buy!

[4gotn]

hello to all

i have one megasuirt im wanting to get rid of. im simply not happy with it and would like a haltech so im willing to let this go.

up first is a ms2 v3.0 - $250 + ship -SOLD
this ms unit should have all the jumpers for a b series engine and will come pretuned for a 323 gtx. it also has the Bosch driver coil so you can run neg side coil trigger. i replaced the red lights on the unit with white ones, they were ugly, and added a fan because its hot where i live. this unit also comes with a super cool black case. the unit was "installed" but i never drove the car so really it had no constant stress on it.

i will also throw in the serial adapter and part of a harness i was going to make to run the serial connection to the center console - FREE!



next up is a ms1 v3.0 - 160 + ship
this unit has a ms1 cpu but has a "interchange" socket so a ms2 daughter board can be installed and comes with the Bosch driver coil and white leds like above. There was a ground fault and it burned a lead but i jumped the lead and tested the module with both my laptop and the stim and the unit is fine, just cosmetically damaged. if it pleases the buyer ill solder the wire directly from point to point. there was also a lead that simply broke of when soldering so i had to jump at particular diode to a transistor. other than these two problems the board should be in really good order. this unit does not come with a case.



for the standard retail price of these units please visits the site below
http://www.diyautotune.com/catalog/mega ... f865723b37" onclick="window.open(this.href);return false;
http://www.diyautotune.com/catalog/mega ... -c-27.html" onclick="window.open(this.href);return false;

[4gotn]

i can be a little flexable on my prices if need be
oh and fyi if your in the states shipping will be like $5-7

[4gotn]

anyone even interested?
i need to let these go
shoot me an offer
if its reasonable ill accept

[4gotn]

bumpity bump

[wytbishop]

If they were V6 boards I would have bought one already.

[Mooneggs]

If they were V6 boards I would have bought one already.

yeah me too

[4gotn]

they can be adjusted to a v6 in about an hour....
they need to be set to two channels being as you have two sets of injectors and a few other timing/ignition tweeks need be done so it will fire on all six....
these are not for one specific model engine. these are universal. in fact the ms1 is a piggyback that usually only controls fuel but can control ignition.

[wytbishop]

Dibs on the V3 board!

Sending you a PM.

[4gotn]

mlody1921 pmd first so let me get an answer out of him
wytbishop is second in line
im allowing for a one day buffer...if someone makes an offer and i do not hear from the previous person for 24 hours, to be fair, Ill move on to the next whos interested

btw the ms1 is the same as the ms2 with the exception of the case and the ms2 board. both should run you around $100

[4gotn]

well the boards are still up for grabs atm
just pm me if your interested...
it may take a few days for me to get back due to school but ill respond