VAF Help

[wittydrewy]

Hey Guys! I have searched and could not find out everything I need to know. First of all My VAF JE50 took a crap on me so I went to AutoZone and Ordered a new one. Price was $320 before Core but the question I have is on the picture it shows Part Number as KL02 not JE50. I have a k8 everything stock except the intake. I know the KL02 will plug in, but will it run right with my setup?

Edited-Fixed JE30 to JE50

[_-Night-Shade-_]

It will run but not right, you need the JE50. How the hell did they get KL02 instead of JE50? MX-3s don't use KL02s stock.

[wittydrewy]

I am sorry I ment JE50. It shows up online as kl02. If it comes in and its a kl02 should I get them to take it back or keep it?

[_-Night-Shade-_]

Give it back. If it comes and it's KL02 tell them you need a JE50. Man you should have just went to a junkyard, or bought it off somebody here. You shouldn't have to pay more than 50 bucks for one of those.

[umcamara]

I have two JE50's if you need for MUCH less than $320...

How do you know the VAF is the problem anyways??

[wittydrewy]

My Car Idles at 2500rpm warm or not and after it gets warm, it starts the jumpy idle from 2500 to 1000 and back again. I pull the codes and I get 8, 10, and 16.
I have read on here it could be my intake so I replaced it with a short ram intake and has no change.

[turpro1993]

I have a je50 if you need it. PM me

[umcamara]

I have a je50 if you need it. PM me

Did you happen to read my post? 2 posts up?

[wittydrewy]

The part comes in today, if it is the wrong part then I will pm you about the vaf.

[Ryan]

umcamara's JE50's are perfectly in spec. I checked them myself

[wittydrewy]

It was the right part so I kept it. It got rid of the problems but I still have Code 16.

[Daninski]

Hey Dude if you need parts post in the [WTB] section. We would of sold you a JE50 VAF for $50 max

[Ryan]

It was the right part so I kept it. It got rid of the problems but I still have Code 16.

You may have kept it, but they're keeping your $250.