mx3autozam - 93 SE Turbo ----New pics Boost is here!
- mitmaks
- Senior Member
- Posts: 8704
- Joined: September 10th, 2001, 2:01 am
- antispam: ~SPAM*SUX~
- Location: Spokane, WA
- Contact:
Re: mx3autozam - 93 SE ----New pics added sept 10
Nicest SE around on this site. That car is MINT.
Magnum s/s lines, strut bars, carbon fiber bezel, indiglow gauge, Sony Xplod, inverted c/f hood, SRD lower tie bar '93 GS SE '95 Cobra SVT #2722 '68 Charger R/T 440
http://www.cardomain.com/id/mitmaks
http://www.cardomain.com/id/mitmaks
- hppwdn
- Regular Member
- Posts: 925
- Joined: May 27th, 2005, 10:50 pm
- Location: West Palm Beach, FL
- Contact:
Re: mx3autozam - 93 SE ----New pics added sept 10
17" Subzeros right? What size tires did you go with?
The HDR pics look great.
The HDR pics look great.
92 MX3 Turbo ($100 junkyard KLG4) 11.904 @ 124.3mph, 14psi, DOT approved Hoosier drags, pump gas.
NSCRA 2009 FWD Drag Radial Finalist
HIN/NOPI Supershow Class Winner - Miami 2010 - Street-Sport Compact-Mazda
Links: Pretty Pic, GoFast Pic, Timeslip, Track Video
As of July 2011 the MX3 has been retired and sold.
NSCRA 2009 FWD Drag Radial Finalist
HIN/NOPI Supershow Class Winner - Miami 2010 - Street-Sport Compact-Mazda
Links: Pretty Pic, GoFast Pic, Timeslip, Track Video
As of July 2011 the MX3 has been retired and sold.
- mx3autozam
- Senior Member
- Posts: 2950
- Joined: September 24th, 2005, 9:09 pm
- Location: Kitchener
Re: mx3autozam - 93 SE ----New pics added sept 10
no 16x7 and 205.45.16..
They are just Cheapo tires They are Aurora which is some off brand from Hankook. They are great tires driving tires very quiet but suck when I get on the gas good or throw it into a corner.
I am wanting to get a 10mm spacer or so to bring them out a bit. I will most likely need to roll the fenders. I have a freind who is good at that and he is going to help me. Once that is done I will probabaly be able to run a 215 or a 225 and will also probabaly switch to a falken rt615 or nitta 555r's.
They are just Cheapo tires They are Aurora which is some off brand from Hankook. They are great tires driving tires very quiet but suck when I get on the gas good or throw it into a corner.
I am wanting to get a 10mm spacer or so to bring them out a bit. I will most likely need to roll the fenders. I have a freind who is good at that and he is going to help me. Once that is done I will probabaly be able to run a 215 or a 225 and will also probabaly switch to a falken rt615 or nitta 555r's.
93 Mazda MX3 KLZE Turbo
- hppwdn
- Regular Member
- Posts: 925
- Joined: May 27th, 2005, 10:50 pm
- Location: West Palm Beach, FL
- Contact:
Re: mx3autozam - 93 SE ----New pics added sept 10
I run 245/45/17s on mine +40 offset if I remember. Didn't have to roll the fenders or use spacers, but it does require coilovers and some precision fitment. On my 15" rims I ran a 225/50/15 and that fit on regular tokico blues. You shouldn't need spacers or fender rolling unless the rims have some exotic offset.
With the 245/45/17s on a 17x7.5 et40 rim they sit about as perfectly lined up with the fender as I could wish for. There should be a new batch of pics end of next week after the big meet down here. Not sure if you'd want to run a tire that wide though, I did it for the 350whp plus track runs. It's a bit overkill for an N/A ZE. Are you gonna boost it in the future?
With the 245/45/17s on a 17x7.5 et40 rim they sit about as perfectly lined up with the fender as I could wish for. There should be a new batch of pics end of next week after the big meet down here. Not sure if you'd want to run a tire that wide though, I did it for the 350whp plus track runs. It's a bit overkill for an N/A ZE. Are you gonna boost it in the future?
92 MX3 Turbo ($100 junkyard KLG4) 11.904 @ 124.3mph, 14psi, DOT approved Hoosier drags, pump gas.
NSCRA 2009 FWD Drag Radial Finalist
HIN/NOPI Supershow Class Winner - Miami 2010 - Street-Sport Compact-Mazda
Links: Pretty Pic, GoFast Pic, Timeslip, Track Video
As of July 2011 the MX3 has been retired and sold.
NSCRA 2009 FWD Drag Radial Finalist
HIN/NOPI Supershow Class Winner - Miami 2010 - Street-Sport Compact-Mazda
Links: Pretty Pic, GoFast Pic, Timeslip, Track Video
As of July 2011 the MX3 has been retired and sold.
- mx3autozam
- Senior Member
- Posts: 2950
- Joined: September 24th, 2005, 9:09 pm
- Location: Kitchener
Re: mx3autozam - 93 SE ----New pics added sept 10
I most want to run the spacers to bring the wheels out so its flush with the fenders.My car is slammed and I am pretty sure it will rub with the spacers. Either way if I roll it i won't need to worry about any rubbing issues.
I really want to boost and I keep thinking about it. I have blown up 2 ze's so far and I know with boost it will not take it to well. I also don't like the idea of modifying the crossmember for the turbo pipes. That damn thing is already pretty pretty close to the ground and hits some bumps and speedbumps as it is. I can't imagin with it modified. I am planning on switching the acr over to full megasquit this winter and runnin an n/a setup on that. Later on down the road if i do boost I am ready with engine management.
I really want to boost and I keep thinking about it. I have blown up 2 ze's so far and I know with boost it will not take it to well. I also don't like the idea of modifying the crossmember for the turbo pipes. That damn thing is already pretty pretty close to the ground and hits some bumps and speedbumps as it is. I can't imagin with it modified. I am planning on switching the acr over to full megasquit this winter and runnin an n/a setup on that. Later on down the road if i do boost I am ready with engine management.
93 Mazda MX3 KLZE Turbo
- hppwdn
- Regular Member
- Posts: 925
- Joined: May 27th, 2005, 10:50 pm
- Location: West Palm Beach, FL
- Contact:
Re: mx3autozam - 93 SE ----New pics added sept 10
I agree on the xmember being low, with my 15s on the car is damn low, but one of the benefits of my 17s was it raised up the bottom of the car, but decreased wheel gap so the car still looks low, but it has much better ground clearance.
92 MX3 Turbo ($100 junkyard KLG4) 11.904 @ 124.3mph, 14psi, DOT approved Hoosier drags, pump gas.
NSCRA 2009 FWD Drag Radial Finalist
HIN/NOPI Supershow Class Winner - Miami 2010 - Street-Sport Compact-Mazda
Links: Pretty Pic, GoFast Pic, Timeslip, Track Video
As of July 2011 the MX3 has been retired and sold.
NSCRA 2009 FWD Drag Radial Finalist
HIN/NOPI Supershow Class Winner - Miami 2010 - Street-Sport Compact-Mazda
Links: Pretty Pic, GoFast Pic, Timeslip, Track Video
As of July 2011 the MX3 has been retired and sold.
Re: mx3autozam - 93 SE ----New pics added sept 10
Yea John those pics off pretty rad man!!! I still think ure car is the cleanest MX3 around!
-
- Regular Member
- Posts: 1603
- Joined: March 6th, 2007, 1:17 pm
- Location: Pittsburgh, Pennsylvania (USA)
Re: mx3autozam - 93 SE ----New pics added sept 10
woah
I think I might use one of your HDR pics for my background. Your car is gorgeous!!!!
I think I might use one of your HDR pics for my background. Your car is gorgeous!!!!
- Sam Baker
- Regular Member
- Posts: 1461
- Joined: May 23rd, 2003, 2:01 am
- Location: Wellington, New Zealand
Re: mx3autozam - 93 SE ----New pics added sept 10
WOW insanely beautiful pix, and very tasteful mods! Those rims look perfect man. Great job, keep it up!
92 Autozam AZ3
-
- Senior Member
- Posts: 6451
- Joined: June 19th, 2004, 2:01 am
- Location: El Paso Tx U.S
- Contact:
Re: mx3autozam - 93 SE
mx3autozam wrote:Here are some pictures from today.
Looks hot
-hec
MX-3 w/ curved neck millenia klde, boosted @ 5 psi. /bov and wastegate are good!/ nitto drag radial/ gutted interior/ millenia red top injectors, vortech fmu/aem wideband/ all bolts ons/ Car put together 100% by me. Mechanic? who needs a mechanic? ew.. real men work on their own cars!
MX-3 w/ curved neck millenia klde, boosted @ 5 psi. /bov and wastegate are good!/ nitto drag radial/ gutted interior/ millenia red top injectors, vortech fmu/aem wideband/ all bolts ons/ Car put together 100% by me. Mechanic? who needs a mechanic? ew.. real men work on their own cars!
- solo_ryder
- Senior Member
- Posts: 6289
- Joined: October 16th, 2004, 2:01 am
- Location: British Columbia
Re: mx3autozam - 93 SE ----New pics added sept 10
way to quote like 10 pics hec. Does look good though John
- _-Night-Shade-_
- Senior Member
- Posts: 2664
- Joined: January 15th, 2009, 8:00 pm
- Location: Toronto, Ontario, Canada
Re: mx3autozam - 93 SE ----New pics added sept 10
John those pics are amazing! Can't wait to see your car in real life.
- Mooneggs
- Forum Moderator
- Posts: 6128
- Joined: August 10th, 2005, 10:08 pm
- antispam: ~SPAM*SUX~
- Location: Hillsboro, OR
- Contact:
Re: mx3autozam - 93 SE ----New pics added sept 10
Those HDR pics are ridiculous! Nice work sir... the car looks fantastic!
My Feedback
92 mx-3 gs klze 'race car' IP 15.05 @ 92.5mph
92 mx-3 gs klze 'daily driver' IP 14.55 @ 95.7mph
http://www.cardomain.com/id/Mooneggs
92 mx-3 gs klze 'race car' IP 15.05 @ 92.5mph
92 mx-3 gs klze 'daily driver' IP 14.55 @ 95.7mph
http://www.cardomain.com/id/Mooneggs
- mitmaks
- Senior Member
- Posts: 8704
- Joined: September 10th, 2001, 2:01 am
- antispam: ~SPAM*SUX~
- Location: Spokane, WA
- Contact:
Re: mx3autozam - 93 SE ----New pics added sept 10
nice quality pics, which camera are you using? How many pixels
Magnum s/s lines, strut bars, carbon fiber bezel, indiglow gauge, Sony Xplod, inverted c/f hood, SRD lower tie bar '93 GS SE '95 Cobra SVT #2722 '68 Charger R/T 440
http://www.cardomain.com/id/mitmaks
http://www.cardomain.com/id/mitmaks
Re: mx3autozam - 93 SE ----New pics added sept 10
I need help picking up my jaw! what type of camera and photo program?
95' Mazda Mx-3
1986 bmw 325e-rust in peace
1996 Subaru Outback-Sold
2002 Bmw 325XIT
1986 bmw 325e-rust in peace
1996 Subaru Outback-Sold
2002 Bmw 325XIT