does anyone have any idea if thesemanifolds and downpipes would fit on the v6 1.8
http://cgi.ebay.co.uk/ws/eBayISAPI.dll? ... K:MEWAX:IT" onclick="window.open(this.href);return false;
And if they wont fit how much altering will it take?
exhaaust manifold
-
- Junior Member
- Posts: 20
- Joined: July 21st, 2009, 4:40 am
- antispam: No
- marcdh
- Regular Member
- Posts: 1460
- Joined: July 26th, 2006, 3:54 pm
- Location: Belfast -Northern Ireland
- Contact:
Re: exhaaust manifold
Yes they'll fit, and they'll give you some extra power. Fitment of the collector pipe can be a bit sketchy and it requires the cat to be moved back 6-8".
AZ-3 1498cc Turbo! EVO 8 turbo and manifold, 5 stud swap, SSR Type C, DIYPNP seq Megasquirt
Mx-3 2.5 V6 Turbo 291 BHP 251 lbft @ 8psi - Retired due to rust and back at uni
View Worklog
Mx-3 2.5 V6 Turbo 291 BHP 251 lbft @ 8psi - Retired due to rust and back at uni
View Worklog
-
- Junior Member
- Posts: 20
- Joined: July 21st, 2009, 4:40 am
- antispam: No
Re: exhaaust manifold
so happy they fit, they will be going on with a custom stainless exhaust so cat doesnt matter. have you done this yourself how are you so sure they will fit
- marcdh
- Regular Member
- Posts: 1460
- Joined: July 26th, 2006, 3:54 pm
- Location: Belfast -Northern Ireland
- Contact:
Re: exhaaust manifold
Because they are the same as what I have on my car Although I have a KLZE the block size is the same, with the same fitment. Only other issue is your EGR pipe. Personally I just blocked it and ditched it.
AZ-3 1498cc Turbo! EVO 8 turbo and manifold, 5 stud swap, SSR Type C, DIYPNP seq Megasquirt
Mx-3 2.5 V6 Turbo 291 BHP 251 lbft @ 8psi - Retired due to rust and back at uni
View Worklog
Mx-3 2.5 V6 Turbo 291 BHP 251 lbft @ 8psi - Retired due to rust and back at uni
View Worklog
-
- Junior Member
- Posts: 20
- Joined: July 21st, 2009, 4:40 am
- antispam: No
Re: exhaaust manifold
sorry.... EGR pipe?
yes yes, im a noob!
yes yes, im a noob!