94 MX-3 TECII 300HP Goal
-
- Regular Member
- Posts: 550
- Joined: November 4th, 2001, 2:01 am
- Location: San Antonio, Tx
- Contact:
Re: 94 MX-3 TECII 300HP Goal
That's insane 25psi....
94 Mazda MX-3 BPT Custom Intake/Exhaust T3/T4, 51mm BOV, Tial WG, 2.5" Piping, 880cc Inj, Godspeed Intercooler, TEC II
My MX-3 Website
My MX-3 Website
-
- Regular Member
- Posts: 550
- Joined: November 4th, 2001, 2:01 am
- Location: San Antonio, Tx
- Contact:
Re: 94 MX-3 TECII 300HP Goal
Got her out of the garage after the initial tune...
Not bad Rick for the first run...
http://www.youtube.com/watch?v=OtDY47lxPDU
Not bad Rick for the first run...
http://www.youtube.com/watch?v=OtDY47lxPDU
94 Mazda MX-3 BPT Custom Intake/Exhaust T3/T4, 51mm BOV, Tial WG, 2.5" Piping, 880cc Inj, Godspeed Intercooler, TEC II
My MX-3 Website
My MX-3 Website
- Limegreen mx-3
- Regular Member
- Posts: 1778
- Joined: October 29th, 2002, 2:01 am
- Location: San Antonio TX
- Contact:
Re: 94 MX-3 TECII 300HP Goal
Here are a couple of quick boost runs at just 14psi..
http://www.youtube.com/watch?v=b7i0e1OU200" onclick="window.open(this.href);return false;
another one from the inside the backfiring is from over reving 1st and 2nd gear no the engine didn't blow up.. 8,000 rpm rev limit on the bp
http://www.youtube.com/watch?v=okrR5KrTkT0" onclick="window.open(this.href);return false;
and 2nite the boost is going up to 18psi after that no more raising the boost until its at a track or dyno..
http://www.youtube.com/watch?v=b7i0e1OU200" onclick="window.open(this.href);return false;
another one from the inside the backfiring is from over reving 1st and 2nd gear no the engine didn't blow up.. 8,000 rpm rev limit on the bp
http://www.youtube.com/watch?v=okrR5KrTkT0" onclick="window.open(this.href);return false;
and 2nite the boost is going up to 18psi after that no more raising the boost until its at a track or dyno..
(12.4@118@18psi) 92 MX-3, KIA (BP-DE)Swap, Electromotive TEC II Standalone, 8,200 Rev Limit, Custom Intake/Exhaust Manifold, 1,000cc PTE Injectors, Custom Fuel Rail, Aeromotive FPR, 80MM Holley TB, MSD 8.5MM Wires, NGK V-Power #8, SC6262 Turbo, 3 in. DownPipe, Tial WG/BOV, 600HP PTE FMIC, 2.5IN Intercooler Piping, EQUUS/Autometer KIA G-Series Tran, Extreme ACT Clutch, Built BP in starting process.
- mx-3_4evr
- Regular Member
- Posts: 609
- Joined: February 8th, 2008, 12:15 am
- Location: Burnsville,MN
- Contact:
Re: 94 MX-3 TECII 300HP Goal
bump for more crazy action videos! I want dyno numbers too!
-
- Regular Member
- Posts: 550
- Joined: November 4th, 2001, 2:01 am
- Location: San Antonio, Tx
- Contact:
Re: 94 MX-3 TECII 300HP Goal
No problem plan on being at the track next week so well see what kind of times it can do out of the garage..
94 Mazda MX-3 BPT Custom Intake/Exhaust T3/T4, 51mm BOV, Tial WG, 2.5" Piping, 880cc Inj, Godspeed Intercooler, TEC II
My MX-3 Website
My MX-3 Website
- mx-3_4evr
- Regular Member
- Posts: 609
- Joined: February 8th, 2008, 12:15 am
- Location: Burnsville,MN
- Contact:
Re: 94 MX-3 TECII 300HP Goal
So.... where is the track / dyno video?
- Limegreen mx-3
- Regular Member
- Posts: 1778
- Joined: October 29th, 2002, 2:01 am
- Location: San Antonio TX
- Contact:
Re: 94 MX-3 TECII 300HP Goal
good news she runs
bad news ur wideband took a s--- again
bad news ur wideband took a s--- again
(12.4@118@18psi) 92 MX-3, KIA (BP-DE)Swap, Electromotive TEC II Standalone, 8,200 Rev Limit, Custom Intake/Exhaust Manifold, 1,000cc PTE Injectors, Custom Fuel Rail, Aeromotive FPR, 80MM Holley TB, MSD 8.5MM Wires, NGK V-Power #8, SC6262 Turbo, 3 in. DownPipe, Tial WG/BOV, 600HP PTE FMIC, 2.5IN Intercooler Piping, EQUUS/Autometer KIA G-Series Tran, Extreme ACT Clutch, Built BP in starting process.