Thought i'd share the love
Thought i'd share the love
I'm new to the MX-3 but was completely disatisfied with mine so.....off to the junkyard!
Nice straight body, crap motor, and smelly damp moldy interior.
Hmm to heavy to pick up by myself....lets lighten things up a bit.
Still kinda portly, how about a little off the top
dang this thing is heavy, half a car weighs half as much right! Hey little bro, cut it in half for me
Still can't pick it up, I'm gonna flip it over and remove the suspension, that should lighten the load
Mo betta. Thats more like it.
Gonna haul it off this weekend, bet it won't even bring the gas money it'll take to get there. At least the scrap yard is just a few blocks away.
Nice straight body, crap motor, and smelly damp moldy interior.
Hmm to heavy to pick up by myself....lets lighten things up a bit.
Still kinda portly, how about a little off the top
dang this thing is heavy, half a car weighs half as much right! Hey little bro, cut it in half for me
Still can't pick it up, I'm gonna flip it over and remove the suspension, that should lighten the load
Mo betta. Thats more like it.
Gonna haul it off this weekend, bet it won't even bring the gas money it'll take to get there. At least the scrap yard is just a few blocks away.
- onlytrueromeo
- Senior Member
- Posts: 2756
- Joined: May 16th, 2007, 10:05 pm
- Location: Albany, NY
Re: Thought i'd share the love
...what a waste of a perfectly good body. You sir are going to MX3 hell.
- solo_ryder
- Senior Member
- Posts: 6289
- Joined: October 16th, 2004, 2:01 am
- Location: British Columbia
Re: Thought i'd share the love
Heh good stuff. That's cool you got it all on that lil trailer.
- RS_OBD'oh_2
- Senior Member
- Posts: 2400
- Joined: April 9th, 2007, 1:26 pm
- Location: Calgary, AB
Re: Thought i'd share the love
you could have made a fair amount parting that out.. good pics tho. I would keep the hatch if I were you, it's worth a few bucks just for the glass.
- Savin
- Regular Member
- Posts: 1580
- Joined: November 18th, 2007, 3:05 pm
- Location: Crown Point, IN (Chicago area)
- Contact:
Re: Thought i'd share the love
I cut mine up into smaller pieces!
'95 MX-3 RS - Project "Déjà Vu" Destined for the scrapyard.
'93 MX-3 GS - SOLD!
'93 MX-3 GS SE - Parts car!
'94 MX-3 GS - Scrapped
'94 MX-3 RS - Scrapped
'96 Sunfire SE - Scrapped
'03 Sunfire SE - Deathtrap
'95 Cavalier Base - Scrapped
'94 Thunderbird LX - Collects dust
'89 Mustang GT - SOLD!
'93 MX-3 GS - SOLD!
'93 MX-3 GS SE - Parts car!
'94 MX-3 GS - Scrapped
'94 MX-3 RS - Scrapped
'96 Sunfire SE - Scrapped
'03 Sunfire SE - Deathtrap
'95 Cavalier Base - Scrapped
'94 Thunderbird LX - Collects dust
'89 Mustang GT - SOLD!
- Inodoro Pereyra
- Senior Member
- Posts: 2067
- Joined: March 11th, 2009, 3:44 pm
- Location: Back in Buenos Aires, Argentina
Re: Thought i'd share the love
I agree. What a waste.
A waste of money to be made, a waste of time, and more important, a waste of a car that's getting more and more difficult to find.
Sorry RWDaddict, but any way you look at it, what you did was dumb, to say the least.
A waste of money to be made, a waste of time, and more important, a waste of a car that's getting more and more difficult to find.
Sorry RWDaddict, but any way you look at it, what you did was dumb, to say the least.
U28sIG5vdyB5b3UgYWxzbyBrbm93IGJhc2UgNjQuLi5odWg/DQpTSE9XIE9GRiEhIQ==
"The more I know man, the more I love my dog."
Diogenes of Sinope.
"The more I know man, the more I love my dog."
Diogenes of Sinope.
- solo_ryder
- Senior Member
- Posts: 6289
- Joined: October 16th, 2004, 2:01 am
- Location: British Columbia
Re: Thought i'd share the love
Just cause it was a mx3 doesnt mean it was a godsend, the car wasnt that great, at least according to him and thats what matters.
Shoulda kept the seat covers.
Shoulda kept the seat covers.
- onlytrueromeo
- Senior Member
- Posts: 2756
- Joined: May 16th, 2007, 10:05 pm
- Location: Albany, NY
Re: Thought i'd share the love
But if the frame wasn't rusted through/bent and the body was in good condition like it looks, then no car should end up like that.
- Inodoro Pereyra
- Senior Member
- Posts: 2067
- Joined: March 11th, 2009, 3:44 pm
- Location: Back in Buenos Aires, Argentina
Re: Thought i'd share the love
You're right: being an MX3 doesn't make it a godsend. But being a working car makes it, in the worst case, a source of money, and if he was not interested in money, it could've been a godsend for somebody who needed it and couldn't afford it.
He could've CLEANED the car.
He could've SOLD the car.
He could've PARTED the car.
He could've GIVEN the car away.
Either one of those options would've meant a lot less work, and given him a lot more money (or satisfaction, providing he's human) than what he did, but instead of that, he decided to spend who knows how many hours working to destroy it, so he could find out that cars are heavy...
And to top it off, he decided to document his "achievement", and post it on an MX3 forum, because it's soooo cool...!
Genious...
He could've CLEANED the car.
He could've SOLD the car.
He could've PARTED the car.
He could've GIVEN the car away.
Either one of those options would've meant a lot less work, and given him a lot more money (or satisfaction, providing he's human) than what he did, but instead of that, he decided to spend who knows how many hours working to destroy it, so he could find out that cars are heavy...
And to top it off, he decided to document his "achievement", and post it on an MX3 forum, because it's soooo cool...!
Genious...
U28sIG5vdyB5b3UgYWxzbyBrbm93IGJhc2UgNjQuLi5odWg/DQpTSE9XIE9GRiEhIQ==
"The more I know man, the more I love my dog."
Diogenes of Sinope.
"The more I know man, the more I love my dog."
Diogenes of Sinope.
- boosted_bullet
- Regular Member
- Posts: 285
- Joined: June 24th, 2008, 4:53 pm
Re: Thought i'd share the love
since its so heavy.... i would work out a little more.??
chicks dig the rice!
-bullet
-bullet
-
- Forum Moderator
- Posts: 3415
- Joined: September 3rd, 2002, 2:01 am
- Location: Eastern Hemisphere
- Contact:
Re: Thought i'd share the love
Oh I had a bunch of guys come over the day i let my 1st one go to the yard... We destroyed that car lol but no pics were taken, we would of had to of worn masks.... lol
08 Infiniti G37s 6speed (The Daily)
Stillen Cold Air Intake, Z1 Plenum Power Mod, Z1 Headers, Z1 Test Pipe, OBX (Ark) Exhaust, Up-Rev Osiris Engine Management (Tuned at Z1), 20x9" 20x10" Str Racing Concave Staggered Rims, SPC Camber kit, Tein H Techs Springs
01 Lexus Is300 (LS2 Project)
93 Mx3 SE 2.5 KLZE (sold it)
93 Mx3 GS 2.0 KFZE (killed it)
Stillen Cold Air Intake, Z1 Plenum Power Mod, Z1 Headers, Z1 Test Pipe, OBX (Ark) Exhaust, Up-Rev Osiris Engine Management (Tuned at Z1), 20x9" 20x10" Str Racing Concave Staggered Rims, SPC Camber kit, Tein H Techs Springs
01 Lexus Is300 (LS2 Project)
93 Mx3 SE 2.5 KLZE (sold it)
93 Mx3 GS 2.0 KFZE (killed it)
Re: Thought i'd share the love
I know one thing, I'm going to tear down my car to pieces, sell parts to members here, and then bash the crap out of it before crushing it. When It's time. I would rather have the parts go to respectful owners, than have some punk drive the thing away to paint the interior and glue a hood scoop on. That's what I call MX-3 respect.
1993 Blaze Red SE, 17" blackie's, b+m sts, 45 deg 3" exh pipe/intake tube, K8ZE, aftmkt probe headers, magnaflow hi-cat, all 2.5" piping, magnaflow muffler.
1976 Datsun 620 p/u, full airride, Firestone 2600`s, 16ga fuel cell, Optima yellow top, AZ compressor, custom tubular frame with 9in step notch, 18" 100 spokes
1955 Willys Overland 4x4 P/U, '78 LT1 350 cu.in, fully restored.
- fowljesse
- Supporting Member
- Posts: 5676
- Joined: March 17th, 2006, 2:59 pm
- Location: portland, OR
- Contact:
Re: Thought i'd share the love
We got a parts car donated (Thanks OROutdoors!). It was wrecked, and wasn't salvagable, so we (Cjthor, Mooneggs, Stereoking15, vancouverwa, and I) stripped it in a day, and CJthor cut it into little pieces. I punched dents all over it, until the skin started coming off my knuckles. Speaking of lifting it, there are pics in the thread about it of me lifting, and balancing the shell on my back.
I agree, though, that the one in this thread could have been parted out, or rebuilt
I agree, though, that the one in this thread could have been parted out, or rebuilt
'93 GS - P&P DE w/ ZE exh. cams/ pistns, KLG4 IM, 65mm TB, MSnS, Phenos, K&N RAI, UDP, Grnd wires, rear batt, filld MM, torq strt, TWM short shftr, Exedy, Lng tube hdrs 2.5" Side exhaust, H&R sprngs, Poly bushngs, strutbars, Alum. crss mmber&tiebar, 22mm swybar, solid links, Direzzas, leather int, Alpine 9805 stereo & alrm, keyless entry, 10 Boston Accoustics spkrs, Prjectrs, Blaster2, CF hood, FG hatch, Lexan
- Inodoro Pereyra
- Senior Member
- Posts: 2067
- Joined: March 11th, 2009, 3:44 pm
- Location: Back in Buenos Aires, Argentina
Re: Thought i'd share the love
That's the point. If your car is not salvageable, well, it's a paperweight already, so the smart thing to do is to part it out, and then, whatever you want to do with the shell, have fun!fowljesse wrote:We got a parts car donated (Thanks OROutdoors!). It was wrecked, and wasn't salvagable, so we (Cjthor, Mooneggs, Stereoking15, vancouverwa, and I) stripped it in a day, and CJthor cut it into little pieces. I punched dents all over it, until the skin started coming off my knuckles. Speaking of lifting it, there are pics in the thread about it of me lifting, and balancing the shell on my back.
I agree, though, that the one in this thread could have been parted out, or rebuilt
But if the car is usable, destroying it is just wrong. It's not about "MX3 respect". As much as we love our cars (and, believe me, I cried when I got mine stolen last June), they're machines, and if we don't need them anymore somebody else can use them.
But besides that, these are not Corollas we're talking about. MX3's are already damn difficult to find, so every time you destroy a good one you're doing it a disservice, not respecting it.
U28sIG5vdyB5b3UgYWxzbyBrbm93IGJhc2UgNjQuLi5odWg/DQpTSE9XIE9GRiEhIQ==
"The more I know man, the more I love my dog."
Diogenes of Sinope.
"The more I know man, the more I love my dog."
Diogenes of Sinope.
-
- Junior Member
- Posts: 2
- Joined: May 16th, 2008, 1:14 am
Re: Thought i'd share the love
It's actually my car.
It was/is being parted out. I bought it not running without wheels from ATL. It was sitting on the ground infront of a chicken house. The sunroof leaked really bad and had ruined the interior along with the PO using it as a truck and hauling all kinds of nastiness in the rear. I have a 93 Escort LXE and a KLZE. I had started aquiring parts for the swap but then came across this car for 250. I stripped it down to bare shell and cut it up. Even saved all the wiring. I had some of the parts up for sale on ebay, club protege, and feoa. I do not have enough posts to sell here so it never got listed on this site and I didn't want to do a bunch of illegitimate post whoring just to do so. I offered up the sheet metal parts for free if you come cut them out, no takers. It went off to the junkyard yesterday so those are no longer available. I didn't want it all going to waste and making a few bucks will help fund my swap as well.
for reference:
Escort build-
http://www.clubprotege.com/forum/showthread.php?t=41894" onclick="window.open(this.href);return false;
For sale-
http://www.clubprotege.com/forum/showthread.php?t=43533" onclick="window.open(this.href);return false;
Kane
It was/is being parted out. I bought it not running without wheels from ATL. It was sitting on the ground infront of a chicken house. The sunroof leaked really bad and had ruined the interior along with the PO using it as a truck and hauling all kinds of nastiness in the rear. I have a 93 Escort LXE and a KLZE. I had started aquiring parts for the swap but then came across this car for 250. I stripped it down to bare shell and cut it up. Even saved all the wiring. I had some of the parts up for sale on ebay, club protege, and feoa. I do not have enough posts to sell here so it never got listed on this site and I didn't want to do a bunch of illegitimate post whoring just to do so. I offered up the sheet metal parts for free if you come cut them out, no takers. It went off to the junkyard yesterday so those are no longer available. I didn't want it all going to waste and making a few bucks will help fund my swap as well.
for reference:
Escort build-
http://www.clubprotege.com/forum/showthread.php?t=41894" onclick="window.open(this.href);return false;
For sale-
http://www.clubprotege.com/forum/showthread.php?t=43533" onclick="window.open(this.href);return false;
Kane