FS: part-out 95' mx-3 BPT GTX
- mazdax3speed
- Regular Member
- Posts: 164
- Joined: February 12th, 2007, 6:34 pm
FS: part-out 95' mx-3 BPT GTX
I've been doing a lot of thinking lately, I think I'm going to end up parting out the car, anything/everything I have. I'm not by any means getting out of the game...just taking a break until I can get my financial situation better.
this is how the car is sitting currently
things I know i have off the top of my head
mx3 rear lower tie bar $35 shipped
front and rear strut bars (ebay) $30 both shipped
BPT GTX motor minus AC PS exhaust manifold and turbo, oil pan is tapped for a threaded return line, runs strong never smoked on me, bought in 2007 from JapanDirect in Raleigh, NC $350!!!
turboXS twin horn BOV $50 SHIPPED
MSII & harness with MS and stock ECU plugs (MS plug was extended a little bit so i could have more slack) the harness did have 2 plugs under the dash rewired to work in a 95 mx3, but i can email mx3 and 323 pinouts, these plugs were for the coil and fuelpump, also including serial to USB cord from radioshack $350SHIPPED
escort GT tranny $175
used competition 6puck/pressure plate (clutch has just about had it, but pressure plate should be good, ill tear it out at some point next week and take pics of it) ill decide on price after i drop the tranny
autometer boost gauge $30 shipped
megan racing water temp gauge 'blackout' style $25 shipped
1st gen & 2nd gen mx3 gauge clusters (mechanical and electric speedo) $30 shipped either one
JRC 8" fmic (bnib) $125SHIPPED
black/orange leather front and rear seats $200obo for front and back
NGK wires w/ coil wire $25 shipped
headlights w/ fairly new yellow bulbs (paid almost 40 for the bulbs) $45SHIPPED
taillights $25 SHIPPED (in good shape no cracks)
front mud flaps $25 shipped
alpine front speakers (6.5"?) $35 shipped
3" firewall back exhaust, mild steel painted black, no flanges, PM me if interested, i would have to cut it atleast once to ship
plus any stock parts you want, literally I want it all gone
i know i have CS bronzeoil shifter bushings, if anybody wants those (they are used, about 2-3months old) make me an offer, haven't taken them out yet
probably some more parts on the car im forgetting worth selling
dash is in great shape btw.
IF ANYBODY IS INTERESTED IN BUYING THE SHELL let me know, i can tow it almost anywhere on the east coast, its about as rust free as a 95 gets, but passengers door has a good amount of bondo.
PAYPAL: blaklabelsk8r2003@yahoo.com
ill try to be as quick as i can to mark things as sold, but you might want to pm me first to make sure before you send money.
PLEASE include your address when you paypal, its just a lot easier for me.
Make offers on anything!!! I need this stuff gone asap.
this is how the car is sitting currently
things I know i have off the top of my head
mx3 rear lower tie bar $35 shipped
front and rear strut bars (ebay) $30 both shipped
BPT GTX motor minus AC PS exhaust manifold and turbo, oil pan is tapped for a threaded return line, runs strong never smoked on me, bought in 2007 from JapanDirect in Raleigh, NC $350!!!
turboXS twin horn BOV $50 SHIPPED
MSII & harness with MS and stock ECU plugs (MS plug was extended a little bit so i could have more slack) the harness did have 2 plugs under the dash rewired to work in a 95 mx3, but i can email mx3 and 323 pinouts, these plugs were for the coil and fuelpump, also including serial to USB cord from radioshack $350SHIPPED
escort GT tranny $175
used competition 6puck/pressure plate (clutch has just about had it, but pressure plate should be good, ill tear it out at some point next week and take pics of it) ill decide on price after i drop the tranny
autometer boost gauge $30 shipped
megan racing water temp gauge 'blackout' style $25 shipped
1st gen & 2nd gen mx3 gauge clusters (mechanical and electric speedo) $30 shipped either one
JRC 8" fmic (bnib) $125SHIPPED
black/orange leather front and rear seats $200obo for front and back
NGK wires w/ coil wire $25 shipped
headlights w/ fairly new yellow bulbs (paid almost 40 for the bulbs) $45SHIPPED
taillights $25 SHIPPED (in good shape no cracks)
front mud flaps $25 shipped
alpine front speakers (6.5"?) $35 shipped
3" firewall back exhaust, mild steel painted black, no flanges, PM me if interested, i would have to cut it atleast once to ship
plus any stock parts you want, literally I want it all gone
i know i have CS bronzeoil shifter bushings, if anybody wants those (they are used, about 2-3months old) make me an offer, haven't taken them out yet
probably some more parts on the car im forgetting worth selling
dash is in great shape btw.
IF ANYBODY IS INTERESTED IN BUYING THE SHELL let me know, i can tow it almost anywhere on the east coast, its about as rust free as a 95 gets, but passengers door has a good amount of bondo.
PAYPAL: blaklabelsk8r2003@yahoo.com
ill try to be as quick as i can to mark things as sold, but you might want to pm me first to make sure before you send money.
PLEASE include your address when you paypal, its just a lot easier for me.
Make offers on anything!!! I need this stuff gone asap.
Last edited by mazdax3speed on June 16th, 2009, 6:01 pm, edited 6 times in total.
Orange 95' BPT GT28r, MSII on the way
- Evo_Spec
- Senior Member
- Posts: 2504
- Joined: December 30th, 2008, 3:41 am
- Location: Calgary, Alberta, Canada
Re: GI: part-out 95' mx-3 BPT GTX
are prices in US or Canadian funds?
dibs on coilovers (do you have struts?)
dibs on coilovers (do you have struts?)
Last edited by Evo_Spec on June 10th, 2009, 8:48 am, edited 1 time in total.
- mazdax3speed
- Regular Member
- Posts: 164
- Joined: February 12th, 2007, 6:34 pm
Re: GI: part-out 95' mx-3 BPT GTX
prices are US $
i have stock struts but they're blown
ill take more pics on monday, im gonna be out of town until then
i have stock struts but they're blown
ill take more pics on monday, im gonna be out of town until then
Orange 95' BPT GT28r, MSII on the way
- mazdax3speed
- Regular Member
- Posts: 164
- Joined: February 12th, 2007, 6:34 pm
Re: FS: part-out 95' mx-3 BPT GTX
bump, just go back from the beach, decided to go ahead with the swap
im taking a bunch of parts off the car today, ill post more pics and prices/items tonight.
im taking a bunch of parts off the car today, ill post more pics and prices/items tonight.
Orange 95' BPT GT28r, MSII on the way
Re: FS: part-out 95' mx-3 BPT GTX
Interested in the strut bars. Will you ship to Canada?
- mazdax3speed
- Regular Member
- Posts: 164
- Joined: February 12th, 2007, 6:34 pm
Re: FS: part-out 95' mx-3 BPT GTX
edited my first post for more items
strut tower bars are pending right now, but if that falls through i would be willing to ship to canada
strut tower bars are pending right now, but if that falls through i would be willing to ship to canada
Orange 95' BPT GT28r, MSII on the way
- solo_ryder
- Senior Member
- Posts: 6289
- Joined: October 16th, 2004, 2:01 am
- Location: British Columbia
Re: FS: part-out 95' mx-3 BPT GTX
I want those bronzoil shifter bushings.. Not sure how much to offer.. Maybe send me a price shipped to my pm and we go from there
Re: FS: part-out 95' mx-3 BPT GTX
how about the armrest?
- mazdax3speed
- Regular Member
- Posts: 164
- Joined: February 12th, 2007, 6:34 pm
Re: FS: part-out 95' mx-3 BPT GTX
solo pm'd
armrest is broken, but some how its still pending...somebody on clubprotege wants it.
armrest is broken, but some how its still pending...somebody on clubprotege wants it.
Orange 95' BPT GT28r, MSII on the way
Re: FS: part-out 95' mx-3 BPT GTX
lol, word. mine is broke to at the hinge
Re: FS: part-out 95' mx-3 BPT GTX
i suppose shipping on the engine is out of the question....
Never be afraid to try...amateurs built the ark, professionals built the titanic.
- mazdax3speed
- Regular Member
- Posts: 164
- Joined: February 12th, 2007, 6:34 pm
Re: FS: part-out 95' mx-3 BPT GTX
^I can ship if your serious
I plan on pulling it friday, i can put it on a pallet and check shipping beginning of the week, there's a freight shipping business a block away from me. would i be shipping it to a business (loading dock) or residential?
I'm in NC, it could be cheaper to meet half way or so depending on how far away it is if you throw in some $$ for gas
I plan on pulling it friday, i can put it on a pallet and check shipping beginning of the week, there's a freight shipping business a block away from me. would i be shipping it to a business (loading dock) or residential?
I'm in NC, it could be cheaper to meet half way or so depending on how far away it is if you throw in some $$ for gas
Orange 95' BPT GT28r, MSII on the way
Re: FS: part-out 95' mx-3 BPT GTX
I'll take the lip PM me your paypal and I will pay right away!
93SE-KLDE Theres a big peice of metal inside my other peice of metal now...weird???
Re: FS: part-out 95' mx-3 BPT GTX
its residential and i'm in kansas. not sure where half way would be. idk, i may have found something closer here. i'll pm you.
Never be afraid to try...amateurs built the ark, professionals built the titanic.
Re: FS: part-out 95' mx-3 BPT GTX
payment sent for the lip!
93SE-KLDE Theres a big peice of metal inside my other peice of metal now...weird???