[GI] CF OEM Side Skirts
Re: [GI] CF OEM Side Skirts
I have not yet had time tofigure outcosts. Rightnow theHatchand wrap around are on the table and priority.
I'll post some info as soon as I figure my shitout.
I'll post some info as soon as I figure my shitout.
OSKY
95 MX-3 GS ZE Turbo: MSnS-extra, AEM WB, Blitz boost controller, MSD 6A w/ Blaster2 Coil, ZE disty, Redtops @ 550, Walbro 255, Garrett T3/T04E 60 Trim w/ .63 A/R, 38mm Deltagate Mark II @4psi, FMIC, Apexi BOV, CM Dual friction, 4-6.25 Kickers, 2ch Alpine V12. That's Alll.
http://www.pakfeifertuning.com
95 MX-3 GS ZE Turbo: MSnS-extra, AEM WB, Blitz boost controller, MSD 6A w/ Blaster2 Coil, ZE disty, Redtops @ 550, Walbro 255, Garrett T3/T04E 60 Trim w/ .63 A/R, 38mm Deltagate Mark II @4psi, FMIC, Apexi BOV, CM Dual friction, 4-6.25 Kickers, 2ch Alpine V12. That's Alll.
http://www.pakfeifertuning.com
Re: [GI] CF OEM Side Skirts
Dam Space bar...
OSKY
95 MX-3 GS ZE Turbo: MSnS-extra, AEM WB, Blitz boost controller, MSD 6A w/ Blaster2 Coil, ZE disty, Redtops @ 550, Walbro 255, Garrett T3/T04E 60 Trim w/ .63 A/R, 38mm Deltagate Mark II @4psi, FMIC, Apexi BOV, CM Dual friction, 4-6.25 Kickers, 2ch Alpine V12. That's Alll.
http://www.pakfeifertuning.com
95 MX-3 GS ZE Turbo: MSnS-extra, AEM WB, Blitz boost controller, MSD 6A w/ Blaster2 Coil, ZE disty, Redtops @ 550, Walbro 255, Garrett T3/T04E 60 Trim w/ .63 A/R, 38mm Deltagate Mark II @4psi, FMIC, Apexi BOV, CM Dual friction, 4-6.25 Kickers, 2ch Alpine V12. That's Alll.
http://www.pakfeifertuning.com
-
- Regular Member
- Posts: 1083
- Joined: August 23rd, 2008, 12:09 am
- Location: Beamsville.
Re: [GI] CF OEM Side Skirts
i just got a pair of poly urethane oem sides for 300. cf ones would be sick but i would paint it anyways.... price is pretty steep considering it will end up looking identical to mine. the sides are not too heavy either. wrap around wings in cf are sweet i wouldnt paint that.
NEED PARTS INSTALLED? PM ME!
- taylor_matt
- Regular Member
- Posts: 144
- Joined: September 27th, 2008, 6:57 pm
- Location: New Brunswick, Canada
Re: [GI] CF OEM Side Skirts
i would like to price fiberglass skirts and possibly front and rear lips. i'm very interested
-
- Regular Member
- Posts: 813
- Joined: February 13th, 2008, 1:57 am
- Location: Dothan, AL.
- Contact:
Re: [GI] CF OEM Side Skirts
Your worried about makin CF Hatches, CF skirts... Why not make a lip kit for us, if anything. I would pick a full lip kit or just a front lip over anything you are selling. A cheap full lip kit would be awesome. A lip would be alot in material anyways, and people are NON stop wanting a front lip for their mx3. just my 2
93 MX-3 2.5 KLZE - KL101 \\ H&R Springs \\ Short Shifter \\ 17" ADR Rims \\ 205/40/R17 Namkang Tires \\ Millenia Manifold \\ Rockford Amp \\ Rockford 12" Sub \\
--- K8 was my gateway drug.
Re: [GI] CF OEM Side Skirts
I remember a long time ago I got an email asking how much I would pay for a cf cargo cover when one was being concidered for production and now nothing? Cf hatch, maybe cf sideskirts but what about the cf cargo cover? I am sure a lot of people would be interested as the old rug on cardboard looks shitty and breaks easily.
-
- Regular Member
- Posts: 1083
- Joined: August 23rd, 2008, 12:09 am
- Location: Beamsville.
Re: [GI] CF OEM Side Skirts
or you could gut itchertel wrote:I remember a long time ago I got an email asking how much I would pay for a cf cargo cover when one was being concidered for production and now nothing? Cf hatch, maybe cf sideskirts but what about the cf cargo cover? I am sure a lot of people would be interested as the old rug on cardboard looks shitty and breaks easily.
NEED PARTS INSTALLED? PM ME!
- solo_ryder
- Senior Member
- Posts: 6289
- Joined: October 16th, 2004, 2:01 am
- Location: British Columbia
Re: [GI] CF OEM Side Skirts
wtf random post ^
Re: [GI] CF OEM Side Skirts
I'm down on the side skirts, full lip kit would bang on me drums like crazy, what about an o.e. 93 gs spoiler?
1993 Blaze Red SE, 17" blackie's, b+m sts, 45 deg 3" exh pipe/intake tube, K8ZE, aftmkt probe headers, magnaflow hi-cat, all 2.5" piping, magnaflow muffler.
1976 Datsun 620 p/u, full airride, Firestone 2600`s, 16ga fuel cell, Optima yellow top, AZ compressor, custom tubular frame with 9in step notch, 18" 100 spokes
1955 Willys Overland 4x4 P/U, '78 LT1 350 cu.in, fully restored.
-
- Regular Member
- Posts: 1083
- Joined: August 23rd, 2008, 12:09 am
- Location: Beamsville.
Re: [GI] CF OEM Side Skirts
old pipe dream bud. i doubt this will happen. and i hope it doesnt happen i like how i have them and some people want them so bad93vtecklr wrote:I'm down on the side skirts, full lip kit would bang on me drums like crazy, what about an o.e. 93 gs spoiler?
NEED PARTS INSTALLED? PM ME!
Re: [GI] CF OEM Side Skirts
oh, thats, just.....evil.
1993 Blaze Red SE, 17" blackie's, b+m sts, 45 deg 3" exh pipe/intake tube, K8ZE, aftmkt probe headers, magnaflow hi-cat, all 2.5" piping, magnaflow muffler.
1976 Datsun 620 p/u, full airride, Firestone 2600`s, 16ga fuel cell, Optima yellow top, AZ compressor, custom tubular frame with 9in step notch, 18" 100 spokes
1955 Willys Overland 4x4 P/U, '78 LT1 350 cu.in, fully restored.
- JM1EC-V6
- Regular Member
- Posts: 192
- Joined: October 25th, 2005, 8:35 pm
- Location: Chicoutimi, Québec , Canada
- Contact:
Re: [GI] CF OEM Side Skirts
iM in for sure, FG !
'94 Mx-3 GS-R SE, KL-ZE Interprep. (From '96 PGT KL)
1110Kg
-Interprep KL31 Spec.
ported heads, Polished combustion chamber,3 angle vlv job,10.3:1 C.R.,0.020'' O.S.,KL31 cam,-0.007'' heads,Long neck IM,KL31 TB, Hotshot headers,2.25'' exhaust,Magnaflow cat
1110Kg
-Interprep KL31 Spec.
ported heads, Polished combustion chamber,3 angle vlv job,10.3:1 C.R.,0.020'' O.S.,KL31 cam,-0.007'' heads,Long neck IM,KL31 TB, Hotshot headers,2.25'' exhaust,Magnaflow cat
Re: [GI] CF OEM Side Skirts
Please, oh pretty please. I want 'em. I'd take 'em in CF if there was any shot of full lip kit, especially if there was an option of having the rsx modded rear lip in cf, that'd be dirty as sh*t.
- AaronTietje
- Regular Member
- Posts: 1196
- Joined: August 21st, 2009, 5:24 pm
- antispam: No
- Location: Prattsburgh NY
Re: [GI] CF OEM Side Skirts
Well, these are the skirts that I will buy when I can find them. So, Yes, I would buy a carbon set. (A price drop would be nice however, I would pay for a bolt on finished piece.)
We all want to be fast and look cool. Cool changes but fast never does.