[FS] Ryan's Official J/Y Run Request List

[Ryan]

It was pretty cold, and I didn't manage to get anything again... just grabbed some easy stuff... I took a look at the pedal assembly... do you really need the entire thing? It's freaking difficult to pull. I'd want to remove the steering column and the seat to do it. Also, in above-freezing weather. My fingers simply can't handle it for so long, doing such awkward movements.

Door had rust. Also, had to kick it open.

[se7en]

ya, you have to remove the column...that's maybe why you had so much problems before...

I do fell bad man...it is a itch-b to pull...

cheers

[Ryan]

I did remove the collum the first time I really tried. It just seems I can't keep motivated to do it in the cold.

[se7en]

no worries man!

maybe in spring
Thanks so much for trying man!

[Ryan]

Well, I feel bad about taking so long. I hate to promise and then not come through. Doesn't bode well with me.

[Ryan]

Well, I plan on going for a quick run again on Saturday. Looking for my BP stuff.

So, bumpity. Anyone want anything?

Yes, Jarid, pedal assy. Its cold!


Oh, and for all of you with girlfriends or wives....

ITS VALENTINES DAY ON SATURDAY! DON'T MISS IT OR YOU'LL BE SORRY!!!

[Ryan]

The MX's are stripped of all interesting parts. I'm pausing till mid march.


But, there is a red wraparound there. Its in terrible shape. Lots of chips, no caps, no hardware.

If anyone wants, let me know. Should still be there for a few weeks yet. If you want to mould it, it would be a perfect option. I could probably get it out to anywhere on this continent for <$80. Probably $60 in Canada.

[Ryan]

I'm in Brandon for a while, and they have an absolutely massive yard.

there is a raised RS spoiler in bright blue, and GS wraparound and front lip in black. If there are any takers, I'd pull them for you.

I work 16 hours a day, so I need to sneak off to go get them, but its entirely possible. They just have to be small things. Let me know, you have untill Friday.

The cars are also mostly intact. There's another black RS with an absoulte prime paint job. If I lived here, I'd swap over all the panels possible

[mazdags94]

Could you by chance pull the lower bracket that connects to the clutch pedal assembly that holds the steering column in place? There should be a plate above the steering cloumn as well that is held in by two nuts. I need that and everything below it that holds the steering cloum in place. That's much easier to do than the entire assembly. The assembly I purchased had everything but this bracket. Let me know, thanks!

[angrygumball316]

hey could you get me the fuel pump relay that bolts where the ecu is and the nuts, bolts and rubber pieces for the cross member and motor mounts PLEASE!?!? on a gs of course

[Ryan]

sorry, I'm rediculously busy for the next 4 weeks. I need to hold off untill then.

apologies. Check peoples parting out lists. Just the spoilers and lip here in Brandon I'd be willing to grap real quick. Easy and high demand.

[Ryan]

Okay, I'm actually going to make a trip this saturday!

Its almost warm, although it snowed today again

I won't have abunch of time but I'll grab whats there.

My list still includes:

GS lips for everyone
switches for everyone
Manual pedal assy for Se7en (or did he sell his car?)

Everyone else has like 20 post and probably doesn't need the stuff anymore. Re-request if you still need

[Dark_Rider2k3]

I haven't been able to get my J/Y and so I'm not sure if there are any MX's there with the rear discs, but if you can let me know what you'd charge to get any parts for the rear disc swap. The only things I don't need are the brake lines, calipers, rotors, and pads. Need the rest of it though (including the master cylinder and such).

[mazdags94]

If you could, I'm still interested in the bracket that holds the steering column to the pedal assembly (manual). It attaches to the clutch/brake pedal assembly and wraps underneath the steering column under the dashboard. It's much easier to remove and ship than the whole assembly. If you would be able to get it i would appreciate it. Price w/ shipping to 14075 also. $20 shipped with bracket?

[Ryan]

Okay guys! Summer is here!

I've got a pristine blue RS with MINTY blue interior. seriously, it looks like it was detailed before it got scrapped. I was probably the first kid to get at it. I ripped out the sunroof (gently) and the window switch(score!) and many of the clips.

Another RS.

Lots of GS's in varying conditions.

Lots of DE's. Mx6, probe, 626...

Requests?