[FS] Random Parts AutoMeter Gauges/Hei Setup
[FS] Random Parts AutoMeter Gauges/Hei Setup
hey guys im not really sure how much im selling these for just yet. throw some offers out there
AutoMeter Oil Pressure Gauge #6153
i bought that for $190 new
so $100 bucks
AutoMeter Oil Temperature Gauge #6156
i bought this for about $115 new
and how about $85 for this
i got these about a year ago i installed them once but the car never worked. all gauges work and come with everything that was in the boxes.(wiring,npt adapters,instructions) they light up very bright blue
im also selling a blaster coil 3, modded cap, resistors, ignition module<---------SOLD!!
Jon
AutoMeter Oil Pressure Gauge #6153
i bought that for $190 new
so $100 bucks
AutoMeter Oil Temperature Gauge #6156
i bought this for about $115 new
and how about $85 for this
i got these about a year ago i installed them once but the car never worked. all gauges work and come with everything that was in the boxes.(wiring,npt adapters,instructions) they light up very bright blue
im also selling a blaster coil 3, modded cap, resistors, ignition module<---------SOLD!!
Jon
Last edited by Bumpysbro on November 19th, 2008, 6:00 pm, edited 3 times in total.
1995 mazda Mx-3 RS 1.6liter DOHC B6-DE
- Mooneggs
- Forum Moderator
- Posts: 6128
- Joined: August 10th, 2005, 10:08 pm
- antispam: ~SPAM*SUX~
- Location: Hillsboro, OR
- Contact:
Re: [FS] Random Parts AutoMeter Gauges/Hei Setup
make sure you post prices - no bidding - or are those the prices?
My Feedback
92 mx-3 gs klze 'race car' IP 15.05 @ 92.5mph
92 mx-3 gs klze 'daily driver' IP 14.55 @ 95.7mph
http://www.cardomain.com/id/Mooneggs
92 mx-3 gs klze 'race car' IP 15.05 @ 92.5mph
92 mx-3 gs klze 'daily driver' IP 14.55 @ 95.7mph
http://www.cardomain.com/id/Mooneggs
Re: [FS] Random Parts AutoMeter Gauges/Hei Setup
no those were the prices when i bought them. ill change it
1995 mazda Mx-3 RS 1.6liter DOHC B6-DE
- taylor_matt
- Regular Member
- Posts: 144
- Joined: September 27th, 2008, 6:57 pm
- Location: New Brunswick, Canada
Re: [FS] Random Parts AutoMeter Gauges/Hei Setup
What does the HEI setup do? And will it fit on a BP 1.8 DOHC?
Re: [FS] Random Parts AutoMeter Gauges/Hei Setup
im not sure if the ignition module is setup up the same way on the Bp system, does the bp cap have a Ign Coil Plug spot on it? on the b6 you have to mod it. try searching around the forums for some info or maybe start a thread on it in the 4cylinder section.
1995 mazda Mx-3 RS 1.6liter DOHC B6-DE
Re: [FS] Random Parts AutoMeter Gauges/Hei Setup
http://www.clubprotege.com/wil/howto/hei/index.htm" onclick="window.open(this.href);return false;
here u go, that shows how to install it on the v6 mx3 and i think on the 4cylinder b6. the stock mx3 coil is prone to breaking down especially when it heats up. this uses the blaster coil for a stronger spark and if its setup up and grounded well should be problem free but ive heard of alot of cars not starting but not sure if thats because it wasnt wired correctly or not. might wana do some research before buying
here u go, that shows how to install it on the v6 mx3 and i think on the 4cylinder b6. the stock mx3 coil is prone to breaking down especially when it heats up. this uses the blaster coil for a stronger spark and if its setup up and grounded well should be problem free but ive heard of alot of cars not starting but not sure if thats because it wasnt wired correctly or not. might wana do some research before buying
1995 mazda Mx-3 RS 1.6liter DOHC B6-DE
Re: [FS] Random Parts AutoMeter Gauges/Hei Setup
Sent you a PM.
Re: [FS] Random Parts AutoMeter Gauges/Hei Setup
Gauges are still for sale, i checked ebay and other places and my prices are about 50 bucks less and their basically brand new.
1995 mazda Mx-3 RS 1.6liter DOHC B6-DE
Re: [FS] Random Parts AutoMeter Gauges/Hei Setup
bump again...if no one wants them ill probably put them on ebay for a little bit more then what im asking here.
1995 mazda Mx-3 RS 1.6liter DOHC B6-DE
- tehbrookzorz
- Regular Member
- Posts: 1561
- Joined: April 29th, 2006, 6:59 pm
- Location: Calgary, Alberta
Re: [FS] Random Parts AutoMeter Gauges/Hei Setup
Questions: Will you ship to Canada? Will you split the gauges? If so, I'm interested in the pressure gauge. Shoot me a pm.
Cody
Re: [FS] Random Parts AutoMeter Gauges/Hei Setup
pressure gauge sale is pending....
the oil temp gauge is still for sale if anyone wants it.
the oil temp gauge is still for sale if anyone wants it.
1995 mazda Mx-3 RS 1.6liter DOHC B6-DE
Re: [FS] Random Parts AutoMeter Gauges/Hei Setup
oil pressure gauge and temp gauge are pending....
1995 mazda Mx-3 RS 1.6liter DOHC B6-DE
Re: [FS] Random Parts AutoMeter Gauges/Hei Setup
both items have been sold. sorry forgot to update it.
1995 mazda Mx-3 RS 1.6liter DOHC B6-DE