1993 MX-3 GS SE 5 Speed with a KLDE motor swap and KL01 ECU.
I've just replaced the timing belt and it's spot on with all the marks. JUST replaced the plugs/wires/cap/rotor button. Also checked the timing with a light and it's spot on as well.
AFter putting the car into Diagnostic mode I am getting the following codes:
Codes: This is the order that they are pulling also.
(If im wrong on any of them let me know lol.. kinda tired and can't read at this point after going through what seems like thousands of trouble code pages
![Sad :(](./images/smilies/icon_sad.gif)
Code 09 - Water Theromosensor
Code 30 - No idea, getting 3 solid pulses completely unlike the 9 in code above.
Code 04 - Camshaft Position Sensor? (Which is in the disty I believe)
Code 40 - Again, No idea, I havent seen this anywhere...
Code 01 - After I connect a plug from the PS pump I started getting this code now as well.. No idea.
The car will start, and die repeatedly until I rev it enough to steady it out then it will actually idle.. somewhat. When revving it'll miss consistently it seems through 2-4kish?
I've adjusted the tps to justbefore the fan kicks on and also the throttle screw for the idle, which has nothing to do with the miss but just more information for the MX-3 gods here.. lol
![Smile :)](./images/smilies/icon_smile.gif)
I have switched the water neck from the mx-3 motor to the probe motor to have the other water sensor, which im assuming might be the reason the CEL flashes for it? But again, im not sure what the miss is, I've searched and searched this is kind of a last resort.. and I'd rather not take franken'car to a dealer because.. well.. its franken'car.. anyway.. any help would be greatly appreciated.
Josh
PS not that it matters but this has been an 8 month project car so far.. The body is complete, but now it's running like this.. I've included a pic of the bodywork/style that i've put together.. I'd REALLY love to start driving my baby lol
![Smile :)](./images/smilies/icon_smile.gif)
and yes i'm aware it's still covered in dust for the most part
![Razz :P](./images/smilies/icon_razz.gif)