After only a couple of years...screwing around with a local shop...Limegreen and bluemx6R have helped me turn a corner on this project. Here it is...
So far we have installed the TEC2...Couple of things remaining...Trigger Wheel, Temp Sensor, Mag Sensor Mount, and a couple relays for the fuel and check engine. So next week we should have it running. Our goal is 260 hp to 300 hp with an upgraded turbo. Here is the work from today...
All the crap not needed anymore..
This is a must in South Texas...
The handy work so far...
Turbo B6DE 300 Horsepower
-
- Regular Member
- Posts: 550
- Joined: November 4th, 2001, 2:01 am
- Location: San Antonio, Tx
- Contact:
Turbo B6DE 300 Horsepower
Last edited by mazda20 on March 29th, 2009, 9:10 pm, edited 3 times in total.
94 Mazda MX-3 BPT Custom Intake/Exhaust T3/T4, 51mm BOV, Tial WG, 2.5" Piping, 880cc Inj, Godspeed Intercooler, TEC II
My MX-3 Website
My MX-3 Website
- Limegreen mx-3
- Regular Member
- Posts: 1778
- Joined: October 29th, 2002, 2:01 am
- Location: San Antonio TX
- Contact:
Re: Turbo B6E 300 Horsepower
Glad to help out
i hope ur going to like the new setup..
no more OEM BS.
i hope ur going to like the new setup..
no more OEM BS.
(12.4@118@18psi) 92 MX-3, KIA (BP-DE)Swap, Electromotive TEC II Standalone, 8,200 Rev Limit, Custom Intake/Exhaust Manifold, 1,000cc PTE Injectors, Custom Fuel Rail, Aeromotive FPR, 80MM Holley TB, MSD 8.5MM Wires, NGK V-Power #8, SC6262 Turbo, 3 in. DownPipe, Tial WG/BOV, 600HP PTE FMIC, 2.5IN Intercooler Piping, EQUUS/Autometer KIA G-Series Tran, Extreme ACT Clutch, Built BP in starting process.
-
- Regular Member
- Posts: 550
- Joined: November 4th, 2001, 2:01 am
- Location: San Antonio, Tx
- Contact:
Re: Turbo B6DE 300 Horsepower
Just to let everyone know this is the crap that I am replacing...
94 Mazda MX-3 BPT Custom Intake/Exhaust T3/T4, 51mm BOV, Tial WG, 2.5" Piping, 880cc Inj, Godspeed Intercooler, TEC II
My MX-3 Website
My MX-3 Website
Re: Turbo B6DE 300 Horsepower
us tx guys should have a meet
<a href="http://www.fodey.com/generators/animate ... .asp"><img src="http://r3.fodey.com/117ef9486659942269d ... 7601.1.gif" border=0 width="404" height="110" alt="Ninja!"></a>
- Limegreen mx-3
- Regular Member
- Posts: 1778
- Joined: October 29th, 2002, 2:01 am
- Location: San Antonio TX
- Contact:
Re: Turbo B6DE 300 Horsepower
Thats just nastymazda20 wrote:Just to let everyone know this is the crap that I am replacing...
ITS Rbluemx6
no feedback
(12.4@118@18psi) 92 MX-3, KIA (BP-DE)Swap, Electromotive TEC II Standalone, 8,200 Rev Limit, Custom Intake/Exhaust Manifold, 1,000cc PTE Injectors, Custom Fuel Rail, Aeromotive FPR, 80MM Holley TB, MSD 8.5MM Wires, NGK V-Power #8, SC6262 Turbo, 3 in. DownPipe, Tial WG/BOV, 600HP PTE FMIC, 2.5IN Intercooler Piping, EQUUS/Autometer KIA G-Series Tran, Extreme ACT Clutch, Built BP in starting process.