This forum is for discussion of topics relating to MX-3 lighting such as Headlights, Tail lights, Accessory Lights, Interior Lights, Etc. For example, Rear Euro Altezza Style Tail lights, Headlight units, LED's, HID's, Bulbs, Interior lights, Neons, Strobes, Auxillary Lights/Fogs or anything filament and gas discharge related.
Also anything dealing with the elctrical system.
ok, so i have a 1995 mazda mx-3 precidia with a dohc 16- valve engine
its my first car i bought some subs from my buddy hooked them up with a deck and 4 jbl speakers im runnin 2 10 inch premier subs with a 800 watt rms pioneer amp the amp is enough to run the subs easily and for not that well known or high end subs they sound amazing in the car. then about a week after of pumpin the subs loud whenever i started to turn the car on it squeaks, the alternator belt is slippin. i had the stock 75 amp alternator in there and tried swappin it to a 85 amp alternator from a mazda 626 it worked for a bit and sure enough the squeaking is back
i dont know if there is anything i can do other than buy a high end alternator with more amps?? and if i need to buy a new alternator anybody got any for sale or no of any??!! let me know cus it sure is starting to piss me off. thanks alot!!
Mine does it on start up, just a little chirp. It changes with the weather, and If the engine is warm it usually doesn't do it. Sometimes in winter it doesn't stop until I rev it a bit. I have a new belt. I went under my hood with a 10mm wrench and a 4' crow bar, loosed off the alternator, and heaved on that thing and tightened it back up. Its a lot better now. Also, when you get out of the car, turn everything off. Fan, A/C, stereo. Make the power draw as low as possible for when you start it up next time. Its really loud and annoying, but luckily I have no one to impress so I'm not embarassed by it
Edit: I have a '93 SOHC
Now with Moderator power!
Black '93 BP RS - wrecked, parted, scrapped.
Green GS - Sold.
Black GS - Summer DD/Race car - Fancy KLZE
Red GS - K8-ATX -> MTX-KLDE - Frakencar. Scrapped
White GS - Rusty. Parts. Scrapped
1997 BMW M3 - my summer baby
2002 BMW 325Xi - sold
2003 Forester Xti - EJ20K swapped. Feedback
I heard something about lubeing it a bit with WD40? Someone back me up on this, I'm not sure. If that belt perma slips because its too lubed, it would be like having no alternator.... and I don't want to be responsible for that.
Now with Moderator power!
Black '93 BP RS - wrecked, parted, scrapped.
Green GS - Sold.
Black GS - Summer DD/Race car - Fancy KLZE
Red GS - K8-ATX -> MTX-KLDE - Frakencar. Scrapped
White GS - Rusty. Parts. Scrapped
1997 BMW M3 - my summer baby
2002 BMW 325Xi - sold
2003 Forester Xti - EJ20K swapped. Feedback
actually i was outside takin a look at it the other day and my neighbour came up to me and said either wd40 or some sort of belt lube works, but now that i think of it wont that make it slip even more...