My 92' GS WideBody Project
My 92' GS WideBody Project
building this to sell it when its done
its at the bottom
of the images
Myspace.com/JunkBoxMotorsports
its at the bottom
of the images
Myspace.com/JunkBoxMotorsports
- tehbrookzorz
- Regular Member
- Posts: 1561
- Joined: April 29th, 2006, 6:59 pm
- Location: Calgary, Alberta
- se7en
- Regular Member
- Posts: 1264
- Joined: August 29th, 2007, 1:47 am
- Location: Canada(brrrr, it's cold)
- Contact:
Re: My 92' GS WideBody Project
I'm not seeing any pics.. and I am not a myspace member to view your pics...
1992 mx-3 GS-T, 10-12psi, T3/t4 hybrid, Turbosmart WG, AFPR, SSAC TURBO pipes, MSD Blaster coil, K&N, AEM W/B, MSnS(full standalone), 225Whp street tuned(10psi), 245Whp (12psi)(300bhp!!!)
1992 Fairlady Z(JDM RHD) 2+2 TT black(done!)700whp+
My Feedback
Don't Click Here! Trust me,Time waster!
1992 Fairlady Z(JDM RHD) 2+2 TT black(done!)700whp+
My Feedback
Don't Click Here! Trust me,Time waster!
- hotsiit
- Supporting Member
- Posts: 1078
- Joined: March 4th, 2001, 2:01 am
- Location: Allentown, PA
- Contact:
Re: My 92' GS WideBody Project
no vote yet, as I am in the same boat as se7en...
Chris--It's HOTNESS, you wouldn't understand! -- Donate to MX-3.com--It'll make you feel good!
http://www.cardomain.com/id/colonelsmx3
1993 Mazda MX-3 RS-Turbo
1993 Mazda RX-7 touring
1983 Mazda RX-7 GSL
1995 Subaru Impreza L AWD Sedan
1987 Jeep Comanche
http://www.cardomain.com/id/colonelsmx3
1993 Mazda MX-3 RS-Turbo
1993 Mazda RX-7 touring
1983 Mazda RX-7 GSL
1995 Subaru Impreza L AWD Sedan
1987 Jeep Comanche
- Savin
- Regular Member
- Posts: 1580
- Joined: November 18th, 2007, 3:05 pm
- Location: Crown Point, IN (Chicago area)
- Contact:
Re: My 92' GS WideBody Project
It took some effort on my part to view them. It looks quite nice so far. A little dusty from the bondo, but still sweet!
'95 MX-3 RS - Project "Déjà Vu" Destined for the scrapyard.
'93 MX-3 GS - SOLD!
'93 MX-3 GS SE - Parts car!
'94 MX-3 GS - Scrapped
'94 MX-3 RS - Scrapped
'96 Sunfire SE - Scrapped
'03 Sunfire SE - Deathtrap
'95 Cavalier Base - Scrapped
'94 Thunderbird LX - Collects dust
'89 Mustang GT - SOLD!
'93 MX-3 GS - SOLD!
'93 MX-3 GS SE - Parts car!
'94 MX-3 GS - Scrapped
'94 MX-3 RS - Scrapped
'96 Sunfire SE - Scrapped
'03 Sunfire SE - Deathtrap
'95 Cavalier Base - Scrapped
'94 Thunderbird LX - Collects dust
'89 Mustang GT - SOLD!
- Custommx3
- Site Administrator
- Posts: 8391
- Joined: November 7th, 2000, 2:01 am
- antispam: ~SPAM*SUX~
- Location: Lat 35.1N Lon -90W
- Contact:
Re: My 92' GS WideBody Project
I like it, but it has the rear drift bumper, which is a little big IMO.
- Mooneggs
- Forum Moderator
- Posts: 6128
- Joined: August 10th, 2005, 10:08 pm
- antispam: ~SPAM*SUX~
- Location: Hillsboro, OR
- Contact:
Re: My 92' GS WideBody Project
yeah that's kind of unique... I don't care for the shelf of a rear bumper you've got there unless you plan on tailgating alot at least you would have a place to sit and hang out
My Feedback
92 mx-3 gs klze 'race car' IP 15.05 @ 92.5mph
92 mx-3 gs klze 'daily driver' IP 14.55 @ 95.7mph
http://www.cardomain.com/id/Mooneggs
92 mx-3 gs klze 'race car' IP 15.05 @ 92.5mph
92 mx-3 gs klze 'daily driver' IP 14.55 @ 95.7mph
http://www.cardomain.com/id/Mooneggs
-
- Supporting Member
- Posts: 281
- Joined: April 15th, 2008, 10:04 pm
- Location: Western NY
Re: My 92' GS WideBody Project
hmm I'd like it with a different rear bumper. Looks great though man!
Re: My 92' GS WideBody Project
yea i do agree on the whole rear bumper things, last night i got a little bit of my idea of the tail section done... ill take picswhen its near complete.... it makes it look a little less HUGE haha..
but on another note... can any of you guys put the pics of it on here... i cant figure it out lol... i'm normally a probetalk.com person... if anyone can post the pics for me that would be great... thanks for all the input so far
just to let you guys know.. i just bought them wheels for a $150 with newer tire :-p
but on another note... can any of you guys put the pics of it on here... i cant figure it out lol... i'm normally a probetalk.com person... if anyone can post the pics for me that would be great... thanks for all the input so far
just to let you guys know.. i just bought them wheels for a $150 with newer tire :-p
- Princess*Precidia
- Regular Member
- Posts: 181
- Joined: March 13th, 2005, 1:29 am
- Location: Calgary, AB
Re: My 92' GS WideBody Project
BEFORE
AFTER
im not a fan of the rear bumper at all, but everything else is lookin good!
AFTER
im not a fan of the rear bumper at all, but everything else is lookin good!
*Maya
1993 Honda Del Sol Si 1.6 Vtec
1993 Mx-3 RS, Fresh Black Paint, Black Altezzas, K&N Air Filter
1995 Mx-3 RS - RIP
1993 Honda Del Sol Si 1.6 Vtec
1993 Mx-3 RS, Fresh Black Paint, Black Altezzas, K&N Air Filter
1995 Mx-3 RS - RIP
Re: My 92' GS WideBody Project
looks awesome but not a fan of the back bumper
-
- Regular Member
- Posts: 522
- Joined: February 7th, 2005, 9:57 pm
- Location: Toronto area
Re: My 92' GS WideBody Project
That's a lot of hard work, so congrats on all the effort made. I have to say though, that I'm not a fan of all aspects of the kit. If I were to make changes, here's what I would suggest:
1. I would change the sideskirts to more of a straight edge along the bottom.
2. For the front bumper, I would suggest eliminating that vent part by the hood.
3. Take off the rear bumper and install one that is more the style of an OEM 96 eclipse rear (maybe with some kind of lip so that it would sit inline with the straight edged sides).
4. Eliminate the F1 style front fenders
5. Separate the kit in pieces instead of being completely molded to the body (makes it easier to fix if something were to break).
6. Add something to the doors to unify the wide body.
1. I would change the sideskirts to more of a straight edge along the bottom.
2. For the front bumper, I would suggest eliminating that vent part by the hood.
3. Take off the rear bumper and install one that is more the style of an OEM 96 eclipse rear (maybe with some kind of lip so that it would sit inline with the straight edged sides).
4. Eliminate the F1 style front fenders
5. Separate the kit in pieces instead of being completely molded to the body (makes it easier to fix if something were to break).
6. Add something to the doors to unify the wide body.
Friendship is like pissing your pants: Everyone can see it, but only you can feel its true warmth.
Re: My 92' GS WideBody Project
wow! that rear bumper HAS TO BE CHANGED!! I still don't know why they made that rear bumper into production! But as everyone else has said looks good just needs some changes. When do you think you will have it done by?
Re: My 92' GS WideBody Project
Front and sides are nice, but that is way too much a$$ on the back.
If you fall, then get back up........Luck favors the prepared
- Ryan
- Senior Member
- Posts: 7198
- Joined: April 7th, 2008, 1:06 pm
- antispam: ~SPAM*SUX~
- Location: Manitoba
Re: My 92' GS WideBody Project
Come on guys... its a bench.. you know, for a roadside beer?
Although that completely changes the look of the car, (obviously....)
Definately one of a kind. And a LOT of work.. kudos to that.
Although that completely changes the look of the car, (obviously....)
Definately one of a kind. And a LOT of work.. kudos to that.
Last edited by Ryan on May 7th, 2008, 12:24 am, edited 1 time in total.
Now with Moderator power!
Black '93 BP RS - wrecked, parted, scrapped.
Green GS - Sold.
Black GS - Summer DD/Race car - Fancy KLZE
Red GS - K8-ATX -> MTX-KLDE - Frakencar. Scrapped
White GS - Rusty. Parts. Scrapped
1997 BMW M3 - my summer baby
2002 BMW 325Xi - sold
2003 Forester Xti - EJ20K swapped.
Feedback
Black '93 BP RS - wrecked, parted, scrapped.
Green GS - Sold.
Black GS - Summer DD/Race car - Fancy KLZE
Red GS - K8-ATX -> MTX-KLDE - Frakencar. Scrapped
White GS - Rusty. Parts. Scrapped
1997 BMW M3 - my summer baby
2002 BMW 325Xi - sold
2003 Forester Xti - EJ20K swapped.
Feedback