total weight of UR MX-3
- fowljesse
- Supporting Member
- Posts: 5676
- Joined: March 17th, 2006, 2:59 pm
- Location: portland, OR
- Contact:
Re: total weight of UR MX-3
Do you have a light weight battery?
A Lexan rear window is over $600.
A Lexan rear window is over $600.
'93 GS - P&P DE w/ ZE exh. cams/ pistns, KLG4 IM, 65mm TB, MSnS, Phenos, K&N RAI, UDP, Grnd wires, rear batt, filld MM, torq strt, TWM short shftr, Exedy, Lng tube hdrs 2.5" Side exhaust, H&R sprngs, Poly bushngs, strutbars, Alum. crss mmber&tiebar, 22mm swybar, solid links, Direzzas, leather int, Alpine 9805 stereo & alrm, keyless entry, 10 Boston Accoustics spkrs, Prjectrs, Blaster2, CF hood, FG hatch, Lexan
- Ryan
- Senior Member
- Posts: 7198
- Joined: April 7th, 2008, 1:06 pm
- antispam: ~SPAM*SUX~
- Location: Manitoba
Re: total weight of UR MX-3
Just take out all the windows and wear goggles.
Now with Moderator power!
Black '93 BP RS - wrecked, parted, scrapped.
Green GS - Sold.
Black GS - Summer DD/Race car - Fancy KLZE
Red GS - K8-ATX -> MTX-KLDE - Frakencar. Scrapped
White GS - Rusty. Parts. Scrapped
1997 BMW M3 - my summer baby
2002 BMW 325Xi - sold
2003 Forester Xti - EJ20K swapped.
Feedback
Black '93 BP RS - wrecked, parted, scrapped.
Green GS - Sold.
Black GS - Summer DD/Race car - Fancy KLZE
Red GS - K8-ATX -> MTX-KLDE - Frakencar. Scrapped
White GS - Rusty. Parts. Scrapped
1997 BMW M3 - my summer baby
2002 BMW 325Xi - sold
2003 Forester Xti - EJ20K swapped.
Feedback
- XxantwawnxX
- Regular Member
- Posts: 1281
- Joined: January 8th, 2005, 11:08 pm
- Location: Newportnews VA
Re: total weight of UR MX-3
fowljesse wrote:Do you have a light weight battery?
A Lexan rear window is over $600.
i do have a light wight battery...11 pounds. but it was not in the car when i weighed it. if i put it in ill be under 2000...or just about. I only paid 100 for my rear window.
* * * * * * 92 Mx3 ZET, rear/front swaybars,srd crossmember,HKS SSQV,cold air,ZE with millinia mani and TB and 280cc injectors,INtrax springs with tokiko HP struts, Grounding kit, MotegiTrakLite wheels 17's at 14lbs each, MSnS Running fuel and spark,HEI mod,T3/To4E .60/.63 stage 3 turbine,3rd gen rx7 fuel pump, SSAC Headers/hotpipes ,38 ext tial wastegate, findanza flywheel, SBC TZ clutch/pressureplate,braille11pound battery/ magnum drilled F/R rotors,projectors, CXmotorsports almuminum intercooler.
-
- Regular Member
- Posts: 603
- Joined: August 2nd, 2001, 2:01 am
- Location: Brantford, Ontario, Canada
- Contact:
Re: total weight of UR MX-3
Now stop taking things off that light weight turbo klze mx-3 and get it to the track again... with your camera.
92 MX-3 GS 2.5 KLZE
14.385 @ 98.21
14.385 @ 98.21
- XxantwawnxX
- Regular Member
- Posts: 1281
- Joined: January 8th, 2005, 11:08 pm
- Location: Newportnews VA
Re: total weight of UR MX-3
YEs and this time ill break into the 12's
* * * * * * 92 Mx3 ZET, rear/front swaybars,srd crossmember,HKS SSQV,cold air,ZE with millinia mani and TB and 280cc injectors,INtrax springs with tokiko HP struts, Grounding kit, MotegiTrakLite wheels 17's at 14lbs each, MSnS Running fuel and spark,HEI mod,T3/To4E .60/.63 stage 3 turbine,3rd gen rx7 fuel pump, SSAC Headers/hotpipes ,38 ext tial wastegate, findanza flywheel, SBC TZ clutch/pressureplate,braille11pound battery/ magnum drilled F/R rotors,projectors, CXmotorsports almuminum intercooler.
- mx-3_4evr
- Regular Member
- Posts: 609
- Joined: February 8th, 2008, 12:15 am
- Location: Burnsville,MN
- Contact:
Re: total weight of UR MX-3
^ get it tuned! and you will see 11s for sure! Very nice!
- XxantwawnxX
- Regular Member
- Posts: 1281
- Joined: January 8th, 2005, 11:08 pm
- Location: Newportnews VA
Re: total weight of UR MX-3
hmm im not sure about 11's....i think if i get it tuned nice maybe mid/low 12's instead of high12 low 13.
* * * * * * 92 Mx3 ZET, rear/front swaybars,srd crossmember,HKS SSQV,cold air,ZE with millinia mani and TB and 280cc injectors,INtrax springs with tokiko HP struts, Grounding kit, MotegiTrakLite wheels 17's at 14lbs each, MSnS Running fuel and spark,HEI mod,T3/To4E .60/.63 stage 3 turbine,3rd gen rx7 fuel pump, SSAC Headers/hotpipes ,38 ext tial wastegate, findanza flywheel, SBC TZ clutch/pressureplate,braille11pound battery/ magnum drilled F/R rotors,projectors, CXmotorsports almuminum intercooler.
- mx-3_4evr
- Regular Member
- Posts: 609
- Joined: February 8th, 2008, 12:15 am
- Location: Burnsville,MN
- Contact:
Re: total weight of UR MX-3
what?! O'rly? lol How much HP you think you might have after tune?
- Limegreen mx-3
- Regular Member
- Posts: 1778
- Joined: October 29th, 2002, 2:01 am
- Location: San Antonio TX
- Contact:
Re: total weight of UR MX-3
u get it tuned 11's are possible i got a low to mid 12.4 on a street tune i can only imagine what a dyno can get me..XxantwawnxX wrote:hmm im not sure about 11's....i think if i get it tuned nice maybe mid/low 12's instead of high12 low 13.
listen to him get it tune people like u need to step it up. ur like almost there
(12.4@118@18psi) 92 MX-3, KIA (BP-DE)Swap, Electromotive TEC II Standalone, 8,200 Rev Limit, Custom Intake/Exhaust Manifold, 1,000cc PTE Injectors, Custom Fuel Rail, Aeromotive FPR, 80MM Holley TB, MSD 8.5MM Wires, NGK V-Power #8, SC6262 Turbo, 3 in. DownPipe, Tial WG/BOV, 600HP PTE FMIC, 2.5IN Intercooler Piping, EQUUS/Autometer KIA G-Series Tran, Extreme ACT Clutch, Built BP in starting process.
- mx-3_4evr
- Regular Member
- Posts: 609
- Joined: February 8th, 2008, 12:15 am
- Location: Burnsville,MN
- Contact:
Re: total weight of UR MX-3
^ Hell yeah that's what I'm talking about! Got to keep up with PR! lol Right now I'm in the making of the fastest 1.6L DOHC all motor mx-3! ITBs should be done soon Megasquirt in the process too! Oh, and it's my daily driver
- Limegreen mx-3
- Regular Member
- Posts: 1778
- Joined: October 29th, 2002, 2:01 am
- Location: San Antonio TX
- Contact:
Re: total weight of UR MX-3
was at the dyno all day yesterday a miata with a stock 1.8 another TRP Mazda put down 320whp damn made me wish i was getting my MX-3 getting dyno'ed. anyways there where a total of 5 TRP cars that got dynoed
1. fully built 1.8 Ls vtec del sol 347whp 16psi.. wastegate issues prevent from upping the boost. C 116 race gas AEM EMS
2. TRP turbo kit on a 94 1.8 miata 320whp 22psi. fuel issues prevent from making more power
stock internal BP what do u say about that. 12.2 1/4 mile time before dyno session wonder what it will be now.. C116 race gas TEC GT EMS
3. my brother 88 MX-6 FE-3 265whp 290 torque 15psi again issues boost leak somewhere prevent from upping the boost. 93 octane TEC II EMS
4. 2000 civic si dart b16 yeap fully built 454whp @ 16psi again issues snap an axles they where 900whp rated drive shaftshop axles.. crazy. note 10.9@132 before dyno session. since axles snap prevent from upping the boost. C116 race gas AEM EMS
5. last 98 hyundia sonata with a built 4G63 bb sc6769 TP turbo race car... 354whp @12-14 psi not ur avg. sonata no issues on the dyno just that it was almost midnight dyno shop closed on us and why the boost wasn't kickup. best pass 12.1 he can't drive LOL he babies the sonata down the track..C116 race gas TEC IIIR EMS
i got to get off my a-- and post some 400whp MX-3.. stock internals in due tyme..
1. fully built 1.8 Ls vtec del sol 347whp 16psi.. wastegate issues prevent from upping the boost. C 116 race gas AEM EMS
2. TRP turbo kit on a 94 1.8 miata 320whp 22psi. fuel issues prevent from making more power
stock internal BP what do u say about that. 12.2 1/4 mile time before dyno session wonder what it will be now.. C116 race gas TEC GT EMS
3. my brother 88 MX-6 FE-3 265whp 290 torque 15psi again issues boost leak somewhere prevent from upping the boost. 93 octane TEC II EMS
4. 2000 civic si dart b16 yeap fully built 454whp @ 16psi again issues snap an axles they where 900whp rated drive shaftshop axles.. crazy. note 10.9@132 before dyno session. since axles snap prevent from upping the boost. C116 race gas AEM EMS
5. last 98 hyundia sonata with a built 4G63 bb sc6769 TP turbo race car... 354whp @12-14 psi not ur avg. sonata no issues on the dyno just that it was almost midnight dyno shop closed on us and why the boost wasn't kickup. best pass 12.1 he can't drive LOL he babies the sonata down the track..C116 race gas TEC IIIR EMS
i got to get off my a-- and post some 400whp MX-3.. stock internals in due tyme..
(12.4@118@18psi) 92 MX-3, KIA (BP-DE)Swap, Electromotive TEC II Standalone, 8,200 Rev Limit, Custom Intake/Exhaust Manifold, 1,000cc PTE Injectors, Custom Fuel Rail, Aeromotive FPR, 80MM Holley TB, MSD 8.5MM Wires, NGK V-Power #8, SC6262 Turbo, 3 in. DownPipe, Tial WG/BOV, 600HP PTE FMIC, 2.5IN Intercooler Piping, EQUUS/Autometer KIA G-Series Tran, Extreme ACT Clutch, Built BP in starting process.
- cjthor
- Forum Moderator
- Posts: 5018
- Joined: November 26th, 2000, 2:01 am
- Location: Portland Oregon
- Contact:
Re: total weight of UR MX-3
There is a truck scale on my way to work. I just dont know how accurate they are...Ill stop and check!Mooneggs wrote:brilliant plan... I still haven't found a scale near me...fowljesse wrote:At my local garbage dump, they weigh you to see how much you leave. When I do my car diet, I'm going to bring a load there, and see what I weigh on the way out.
Jarid Perry
94 mx3 Turrrbooooo (not even close to stock) 302WHP
71 Chevy C20 (tow rig!!)
77 Jeep CJ5 (no way its stock)
06 MINI Cooper S JCW GP (few goodies) 210WHP
2008 MINI Cooper Clubman S
94 mx3 Turrrbooooo (not even close to stock) 302WHP
71 Chevy C20 (tow rig!!)
77 Jeep CJ5 (no way its stock)
06 MINI Cooper S JCW GP (few goodies) 210WHP
2008 MINI Cooper Clubman S
- fowljesse
- Supporting Member
- Posts: 5676
- Joined: March 17th, 2006, 2:59 pm
- Location: portland, OR
- Contact:
Re: total weight of UR MX-3
'93 GS - P&P DE w/ ZE exh. cams/ pistns, KLG4 IM, 65mm TB, MSnS, Phenos, K&N RAI, UDP, Grnd wires, rear batt, filld MM, torq strt, TWM short shftr, Exedy, Lng tube hdrs 2.5" Side exhaust, H&R sprngs, Poly bushngs, strutbars, Alum. crss mmber&tiebar, 22mm swybar, solid links, Direzzas, leather int, Alpine 9805 stereo & alrm, keyless entry, 10 Boston Accoustics spkrs, Prjectrs, Blaster2, CF hood, FG hatch, Lexan
Re: total weight of UR MX-3
nice topic i wonder how much my car weights since it is not turbo and it has a fiber glass hood and hatch lexan glass the throttles weights alot less than stock intake manifold like 30 pounds less i mesuredit lenso rims weight alot less to
11.20 @120 1.58 60 ft ALL Motor KL
- mx-3_4evr
- Regular Member
- Posts: 609
- Joined: February 8th, 2008, 12:15 am
- Location: Burnsville,MN
- Contact:
Re: total weight of UR MX-3
^ ITBs FTW! Go get your car weighted! I'm pretty sure it's in the 1900-2100lbs. range