Hi,
I have a problem with my KL-ZE.. It has recently developed quite a bad missfire from a cold start, once the engine gets up to temperature the missfire seems to go away!
The car also trys to stall when I stop, the revs drop and will either go back to normal or will actually stall.
I have changed both O2 sensors, fitted new spark plugs, new HT Leads, replaced the disty cap and even replaced the IM gaskets... however none of this seems to have made a difference
This morning I cleared the ECU codes, run the car and got new codes - 17 and 23
Does anyone have any idea what might be causing all this?
Im running out of ideas now
Thanks
Jono
1994 (UK MX-3) KLZE (Jspec)
Problem with missfire and codes 17 + 23
-
- Regular Member
- Posts: 33
- Joined: February 26th, 2006, 6:22 pm
- Location: United Kingdom
Problem with missfire and codes 17 + 23
UK 94 2.5L KL-ZE V6 MX3, KL-68 TB, Chipped ECU, Green Air Kit, Exceedy Race Clutch, Hand made exhaust system, Goodridge Braided Brake Lines, Black Diamond Drilled & Grooved Disks with Black Diamond Predator Pads
- Kirk95gs
- Supporting Member
- Posts: 820
- Joined: July 21st, 2006, 10:02 am
- Location: Nova Scotia/New Bunswick
- Contact:
Re: Problem with missfire and codes 17 + 23
Thoughs codes are o2 codes are they not? Have you changed your catalytic converter befor? could be old/pluged up causing wrong readings in the o2's. It would also cause the hesitation and idle issues.