Hey just wanted to get some feedback from some of you that have shaved your handles..
Is it nessecary to get doorpoppers allso or is the door opening enough itself when the solenoid pulls on the latch?
All info appreciated
Thanks
Dennis
1992 MX-3 V6 Z1 Arbet VIII 17 x 8" -35mm Proracing Springs on KYB Sports, Corksport Strutbars, Brembo Cross Drilled & Slotted, Goodridge SS Brakelines, Corksport SS Clutchline, Mazdaspeed Enginemounts & Front arm bushings, All SRD bushings in shifterlinkage and cross member, Pacesetter Shortshifter, KN Conefilter, Custom SS Exhaust, Stereo Oldschool Goodies Denon & Phoenix Gold, Boston Pro & Cerwin Vega and lots of other small goodies
I think it would look cool. Just make sure you know how to break in, just in case. I have an alarm that unlocks, but it doesn't pop. I assume you'd need another soleniod.
The door pops out enough w/o the pusher. I never got around to welding mine shut before I parked the car but it was cool as s^%t to pop the door when someone was walking by. they almost freak out.
93' MX-3 GSSE - R.I.P. K8 with Integra CAI, HEI mod, Koni inserts with H&R's,drift kit, Kicker KX400.1 and KX200.2 amps, 2 kicker 12s, set of 6x9's. Custom trunk enclosure
How to do it isnt the problem, got all that under control with failsafe and all, just wanted peoples feedback if it works allright without poppers
And im not doing a halfassed job! Offcourse im not filling them with bondo
Sk8terdude sounds cool and it pops out allright everytime on itself? and approx. how much does the door pop out on itself??
1992 MX-3 V6 Z1 Arbet VIII 17 x 8" -35mm Proracing Springs on KYB Sports, Corksport Strutbars, Brembo Cross Drilled & Slotted, Goodridge SS Brakelines, Corksport SS Clutchline, Mazdaspeed Enginemounts & Front arm bushings, All SRD bushings in shifterlinkage and cross member, Pacesetter Shortshifter, KN Conefilter, Custom SS Exhaust, Stereo Oldschool Goodies Denon & Phoenix Gold, Boston Pro & Cerwin Vega and lots of other small goodies
93' MX-3 GSSE - R.I.P. K8 with Integra CAI, HEI mod, Koni inserts with H&R's,drift kit, Kicker KX400.1 and KX200.2 amps, 2 kicker 12s, set of 6x9's. Custom trunk enclosure
I'd love to see a video!
I had a bike w/ remote start/ shutoff that would turn heads. It worked from the top of a small mountain. I could barely see it, and would start it when people were near.
93' MX-3 GSSE - R.I.P. K8 with Integra CAI, HEI mod, Koni inserts with H&R's,drift kit, Kicker KX400.1 and KX200.2 amps, 2 kicker 12s, set of 6x9's. Custom trunk enclosure
93' MX-3 GSSE - R.I.P. K8 with Integra CAI, HEI mod, Koni inserts with H&R's,drift kit, Kicker KX400.1 and KX200.2 amps, 2 kicker 12s, set of 6x9's. Custom trunk enclosure
93' MX-3 GSSE - R.I.P. K8 with Integra CAI, HEI mod, Koni inserts with H&R's,drift kit, Kicker KX400.1 and KX200.2 amps, 2 kicker 12s, set of 6x9's. Custom trunk enclosure
Haha. My buddy is an engineer at Intel. I hope his is better. I did some cement repair for him, and it eroded my fingertips down to the meat (use gloves when using vinyl cement repair). Yeah, it sucked.. He helped for about 30 minutes, and his fingerprint reader didn't recognize him. He gets stuff that won't be released for a while. He built me a computer with a chip and junk that won't be realeased for a while.. Something to do with more than one core (4?), and hyperthreading... It's Greek to me. The chip cooler looks like a V8 engine, seriously! IT's got 8 headers, and what looks like an air filter on top. I think it even uses oil!
Haha that was a nice product..
It only works when the car is unlocked, so if anyone runs off with it its your own fault
Only its like 20times to expensive for what its worth of some simple electronics, its a good idea, but a simple piezo switch would do just as good if mounted correctly
Skaterdude i want to see that video allso
1992 MX-3 V6 Z1 Arbet VIII 17 x 8" -35mm Proracing Springs on KYB Sports, Corksport Strutbars, Brembo Cross Drilled & Slotted, Goodridge SS Brakelines, Corksport SS Clutchline, Mazdaspeed Enginemounts & Front arm bushings, All SRD bushings in shifterlinkage and cross member, Pacesetter Shortshifter, KN Conefilter, Custom SS Exhaust, Stereo Oldschool Goodies Denon & Phoenix Gold, Boston Pro & Cerwin Vega and lots of other small goodies
93' MX-3 GSSE - R.I.P. K8 with Integra CAI, HEI mod, Koni inserts with H&R's,drift kit, Kicker KX400.1 and KX200.2 amps, 2 kicker 12s, set of 6x9's. Custom trunk enclosure