Question about BP swap harness

[The General]

Umm anyone know and can direct me to a link, on how to go about taking out the wiring harness, preferably out of an escort, I have to go take mine out in a few days, and could use a step by step guide, any other info about the electrical part would be useful

[TREVO123]

just unplug the wires and unbolt the grounds and follow and unclip it from the firewall..

[The General]

so it unclips right at the firewall, cause that would be hella easy, and Im guessing the wires from the firewall to ECU are the same for the BP and B6?

[umcamara]

No, I think he means unfasten it from the firewall. I believe it goes through the firewall to the ecu, but still no big deal.

[The General]

still you know any guides, what I think you guys mean is, unhook it from the ecu, then just pulls those wires from the ecu? like through the firewall, on the engine side of everything, also can I just swap the bp everything for the b6 everything and not have to splice stuff?

[atlantamx3]

yes, it really is that easy. If you have a BP harness and ECU, take out the B6 stuff and put in the BP stuff and crank it up.

[The General]

alright so no splicing if I rip out the old stuff and put in the new? haha sorry I sound so retarded just need to make sure

[umcamara]

I'm not too sure if the harness inside the car needs to be changed at all though.

[The General]

I guess Ill find out soon enough, thanks guys for the help

[umcamara]

I'm very curious as to how this turns out, as I have a '96, and have a BP swap on my radar screen. If you can, start a worklog, or keep us posted.