well, some will say that the turbo from the ebay kit is no good, but I have had good luck so far.
7
Ford Probe turbo kit fit on MX3? (PICS)
- se7en
- Regular Member
- Posts: 1264
- Joined: August 29th, 2007, 1:47 am
- Location: Canada(brrrr, it's cold)
- Contact:
Re: Ford Probe turbo kit fit on MX3? (PICS)
1992 mx-3 GS-T, 10-12psi, T3/t4 hybrid, Turbosmart WG, AFPR, SSAC TURBO pipes, MSD Blaster coil, K&N, AEM W/B, MSnS(full standalone), 225Whp street tuned(10psi), 245Whp (12psi)(300bhp!!!)
1992 Fairlady Z(JDM RHD) 2+2 TT black(done!)700whp+
My Feedback
Don't Click Here! Trust me,Time waster!
1992 Fairlady Z(JDM RHD) 2+2 TT black(done!)700whp+
My Feedback
Don't Click Here! Trust me,Time waster!
- Mooneggs
- Forum Moderator
- Posts: 6128
- Joined: August 10th, 2005, 10:08 pm
- antispam: ~SPAM*SUX~
- Location: Hillsboro, OR
- Contact:
Re: Ford Probe turbo kit fit on MX3? (PICS)
se7en wrote:well, some will say that the turbo from the ebay kit is no good, but I have had good luck so far.
7
heheh I'll give it another 1000 miles
My Feedback
92 mx-3 gs klze 'race car' IP 15.05 @ 92.5mph
92 mx-3 gs klze 'daily driver' IP 14.55 @ 95.7mph
http://www.cardomain.com/id/Mooneggs
92 mx-3 gs klze 'race car' IP 15.05 @ 92.5mph
92 mx-3 gs klze 'daily driver' IP 14.55 @ 95.7mph
http://www.cardomain.com/id/Mooneggs
- se7en
- Regular Member
- Posts: 1264
- Joined: August 29th, 2007, 1:47 am
- Location: Canada(brrrr, it's cold)
- Contact:
Re: Ford Probe turbo kit fit on MX3? (PICS)
ya, I here ya, but I got a t4 60-1 turbo to replace it when it goes
turbonetics one, so I will be fine then
7
ps, I have got 12 tanks of gas out of this one already and have had no problems
I am the luckiest ebay turbo guy so far.
turbonetics one, so I will be fine then
7
ps, I have got 12 tanks of gas out of this one already and have had no problems
I am the luckiest ebay turbo guy so far.
1992 mx-3 GS-T, 10-12psi, T3/t4 hybrid, Turbosmart WG, AFPR, SSAC TURBO pipes, MSD Blaster coil, K&N, AEM W/B, MSnS(full standalone), 225Whp street tuned(10psi), 245Whp (12psi)(300bhp!!!)
1992 Fairlady Z(JDM RHD) 2+2 TT black(done!)700whp+
My Feedback
Don't Click Here! Trust me,Time waster!
1992 Fairlady Z(JDM RHD) 2+2 TT black(done!)700whp+
My Feedback
Don't Click Here! Trust me,Time waster!
Re: Ford Probe turbo kit fit on MX3? (PICS)
those ebay turbo pipes bolt right up with no clearance issues? i wanna buy a set right now but im trying to find out if i need a shop to cut and make em fit.
- se7en
- Regular Member
- Posts: 1264
- Joined: August 29th, 2007, 1:47 am
- Location: Canada(brrrr, it's cold)
- Contact:
Re: Ford Probe turbo kit fit on MX3? (PICS)
well, the actual pipes fit just fine. but when you put the cross member back on, you will be in for a surprise.
the front to back crossmember will have to be cut and welded to allow clearance for the up-pipe.
other than that, they fit great.
oh yeah, have fun with the rear enhaust manifold. it is a b----.
7
the front to back crossmember will have to be cut and welded to allow clearance for the up-pipe.
other than that, they fit great.
oh yeah, have fun with the rear enhaust manifold. it is a b----.
7
1992 mx-3 GS-T, 10-12psi, T3/t4 hybrid, Turbosmart WG, AFPR, SSAC TURBO pipes, MSD Blaster coil, K&N, AEM W/B, MSnS(full standalone), 225Whp street tuned(10psi), 245Whp (12psi)(300bhp!!!)
1992 Fairlady Z(JDM RHD) 2+2 TT black(done!)700whp+
My Feedback
Don't Click Here! Trust me,Time waster!
1992 Fairlady Z(JDM RHD) 2+2 TT black(done!)700whp+
My Feedback
Don't Click Here! Trust me,Time waster!
Re: Ford Probe turbo kit fit on MX3? (PICS)
ive always known about the modded crossmember....i thought there was some other clearance issues.....why was the exhaust a b----? messin with the bolts and such? i can imagine....ps. thanks for the info se7en
- se7en
- Regular Member
- Posts: 1264
- Joined: August 29th, 2007, 1:47 am
- Location: Canada(brrrr, it's cold)
- Contact:
Re: Ford Probe turbo kit fit on MX3? (PICS)
the exhaust is a pain because the probe is a little longer than our mx-3's so the exhaust bolts up a bit farther.
so on our cars, you have to cut some of your stock exhaust and reweld it to the pipes.
most just go to the muffler shop. It would cost roughly $50.
cheers.
7
so on our cars, you have to cut some of your stock exhaust and reweld it to the pipes.
most just go to the muffler shop. It would cost roughly $50.
cheers.
7
1992 mx-3 GS-T, 10-12psi, T3/t4 hybrid, Turbosmart WG, AFPR, SSAC TURBO pipes, MSD Blaster coil, K&N, AEM W/B, MSnS(full standalone), 225Whp street tuned(10psi), 245Whp (12psi)(300bhp!!!)
1992 Fairlady Z(JDM RHD) 2+2 TT black(done!)700whp+
My Feedback
Don't Click Here! Trust me,Time waster!
1992 Fairlady Z(JDM RHD) 2+2 TT black(done!)700whp+
My Feedback
Don't Click Here! Trust me,Time waster!
Re: Ford Probe turbo kit fit on MX3? (PICS)
I suppose this wouldn't be a great first project to attempt if i have little experience with engines and such eh? I'd love to turbo my car, faster is always better!
- se7en
- Regular Member
- Posts: 1264
- Joined: August 29th, 2007, 1:47 am
- Location: Canada(brrrr, it's cold)
- Contact:
Re: Ford Probe turbo kit fit on MX3? (PICS)
well.....it depends on how much money you have
7
7
1992 mx-3 GS-T, 10-12psi, T3/t4 hybrid, Turbosmart WG, AFPR, SSAC TURBO pipes, MSD Blaster coil, K&N, AEM W/B, MSnS(full standalone), 225Whp street tuned(10psi), 245Whp (12psi)(300bhp!!!)
1992 Fairlady Z(JDM RHD) 2+2 TT black(done!)700whp+
My Feedback
Don't Click Here! Trust me,Time waster!
1992 Fairlady Z(JDM RHD) 2+2 TT black(done!)700whp+
My Feedback
Don't Click Here! Trust me,Time waster!