323 hatch klze all motor at the drags video
323 hatch klze all motor at the drags video
heres a vid of my hatch 323 klze stock engine mx6 tranny,22x9 13 sliks and still on this pass it made 2.0 on the 60feet(sucks) its best time is 13.4@101mph
http://videos.streetfire.net/video/4211 ... d5e62e.htm" onclick="window.open(this.href);return false;
http://videos.streetfire.net/video/4211 ... d5e62e.htm" onclick="window.open(this.href);return false;
-
- Regular Member
- Posts: 603
- Joined: August 2nd, 2001, 2:01 am
- Location: Brantford, Ontario, Canada
- Contact:
Re: 323 hatch klze all motor at the drags video
Great stuff !
Sounds fine and went well. Faster than any mx3 with a ze.
Sounds fine and went well. Faster than any mx3 with a ze.
92 MX-3 GS 2.5 KLZE
14.385 @ 98.21
14.385 @ 98.21
Re: 323 hatch klze all motor at the drags video
Dang. It was definitely hauling some serious nuts. What were you racing against?
SSR Mx-3: Custom CAI, custom 2.25 Magnaflow Exhaust (high-flow cat, resonator, & muffler), Genie 4-1 Header, Tokico Blue Struts, H&R Lowering Springs, Corksport front and rear Strut Bars, SSR Competition Wheels (11 lbs), Corksport Short-Shifter, KVR Slotted Front Rotors w/ KVR Carbon FIber Break Pads.
1992 Mazda Mx-3 RS
"God cannot give us happiness and peace apart from Himself, because it is not there. There is no such thing."- C.S. Lewis
1992 Mazda Mx-3 RS
"God cannot give us happiness and peace apart from Himself, because it is not there. There is no such thing."- C.S. Lewis
- Limegreen mx-3
- Regular Member
- Posts: 1778
- Joined: October 29th, 2002, 2:01 am
- Location: San Antonio TX
- Contact:
Re: 323 hatch klze all motor at the drags video
not bad for a V6 not bad all
nice 323 u got going
nice 323 u got going
(12.4@118@18psi) 92 MX-3, KIA (BP-DE)Swap, Electromotive TEC II Standalone, 8,200 Rev Limit, Custom Intake/Exhaust Manifold, 1,000cc PTE Injectors, Custom Fuel Rail, Aeromotive FPR, 80MM Holley TB, MSD 8.5MM Wires, NGK V-Power #8, SC6262 Turbo, 3 in. DownPipe, Tial WG/BOV, 600HP PTE FMIC, 2.5IN Intercooler Piping, EQUUS/Autometer KIA G-Series Tran, Extreme ACT Clutch, Built BP in starting process.
Re: 323 hatch klze all motor at the drags video
thanx guys,i ran with a mitsubishi mirage .mi goal is to get the sliks to stick like they are suppose to,with a 1.8 60ft. i should run 13.2
- Limegreen mx-3
- Regular Member
- Posts: 1778
- Joined: October 29th, 2002, 2:01 am
- Location: San Antonio TX
- Contact:
Re: 323 hatch klze all motor at the drags video
my best 60ft was 1.9
(12.4@118@18psi) 92 MX-3, KIA (BP-DE)Swap, Electromotive TEC II Standalone, 8,200 Rev Limit, Custom Intake/Exhaust Manifold, 1,000cc PTE Injectors, Custom Fuel Rail, Aeromotive FPR, 80MM Holley TB, MSD 8.5MM Wires, NGK V-Power #8, SC6262 Turbo, 3 in. DownPipe, Tial WG/BOV, 600HP PTE FMIC, 2.5IN Intercooler Piping, EQUUS/Autometer KIA G-Series Tran, Extreme ACT Clutch, Built BP in starting process.
- Custommx3
- Site Administrator
- Posts: 8391
- Joined: November 7th, 2000, 2:01 am
- antispam: ~SPAM*SUX~
- Location: Lat 35.1N Lon -90W
- Contact:
Re: 323 hatch klze all motor at the drags video
What rad are you using?
We had to "jimmy-rig" the k8 one in there when we put a k8 in a 323.
We had to "jimmy-rig" the k8 one in there when we put a k8 in a 323.
- Mooneggs
- Forum Moderator
- Posts: 6128
- Joined: August 10th, 2005, 10:08 pm
- antispam: ~SPAM*SUX~
- Location: Hillsboro, OR
- Contact:
Re: 323 hatch klze all motor at the drags video
I've always liked the 323. If I could get my hands on a RHD AWD version that would be sweeeeeet
My Feedback
92 mx-3 gs klze 'race car' IP 15.05 @ 92.5mph
92 mx-3 gs klze 'daily driver' IP 14.55 @ 95.7mph
http://www.cardomain.com/id/Mooneggs
92 mx-3 gs klze 'race car' IP 15.05 @ 92.5mph
92 mx-3 gs klze 'daily driver' IP 14.55 @ 95.7mph
http://www.cardomain.com/id/Mooneggs
Re: 323 hatch klze all motor at the drags video
AWD+V6 KLZE= crazy shizznit hehehe
Re: 323 hatch klze all motor at the drags video
whats your curb weight on that car!?
I mean, a mx-3klze at its best with prolly slicks and decent weight reduction (2400lbs) and a under 2.0 60's might make low 14's and maybe high 13 ( speculations)
and i bet that 323 is what 2200lbs range!?, and u do 13.4, maybe mx-3ers cant drive
I mean, a mx-3klze at its best with prolly slicks and decent weight reduction (2400lbs) and a under 2.0 60's might make low 14's and maybe high 13 ( speculations)
and i bet that 323 is what 2200lbs range!?, and u do 13.4, maybe mx-3ers cant drive
93 mx-3 w/ Curved Neck klze
- Dali
- Supporting Member
- Posts: 1621
- Joined: January 28th, 2003, 2:01 am
- antispam: No
- Location: Williams lake, BC
Re: 323 hatch klze all motor at the drags video
yah, the rad is going to give me problems when it put the 323 back together. i tried putting the v6 rad into it but there was only about 1/4" between the rad and the headers. not too fond of this, even with filled mounts it will probably crush into it. looking into getting a vw rabbit half rad from a friends car, has stupid bungs on it though.
1993 White gs klze.