[FS] KLZE with KLDE valvetrain & RR-Racing UDP
[FS] KLZE with KLDE valvetrain & RR-Racing UDP
I am just cleaning house on all my parts and cars. So i have this motor together in my storage. It was running perfectly fine only thing is the compression was rather low for a KLZE haven't checked in a while but i believe 160-180psi per cylinder...they were all withing 5-10 psi of eachother.
Here is what u get:
NO CAMS
NO INTAKE MANIFOLD
NO OIL PAN
KL-31 Heads with KLDE valvetrain swapped over so no more dropped valves.
Heads are bolted to the block, drop a set of cams in and a intake and the motor will run.
RR-Racing anodized black UDP, by far the best looking pulley out there.
Thats all i can think of now...have any questions please feel free to ask me. I will not ship, looking for a local pick-up.
$150 picked up. The pulley alone is worth $100
Here is what u get:
NO CAMS
NO INTAKE MANIFOLD
NO OIL PAN
KL-31 Heads with KLDE valvetrain swapped over so no more dropped valves.
Heads are bolted to the block, drop a set of cams in and a intake and the motor will run.
RR-Racing anodized black UDP, by far the best looking pulley out there.
Thats all i can think of now...have any questions please feel free to ask me. I will not ship, looking for a local pick-up.
$150 picked up. The pulley alone is worth $100
***D-Tuned Custom KL MX-3 on Nitrous***
-
- Senior Member
- Posts: 6451
- Joined: June 19th, 2004, 2:01 am
- Location: El Paso Tx U.S
- Contact:
hey can i drive to california and pick it up? i live in el paso tx.. whats that like 12 hrs away? let me know if u got the block, does it burn any oil?
-hec
MX-3 w/ curved neck millenia klde, boosted @ 5 psi. /bov and wastegate are good!/ nitto drag radial/ gutted interior/ millenia red top injectors, vortech fmu/aem wideband/ all bolts ons/ Car put together 100% by me. Mechanic? who needs a mechanic? ew.. real men work on their own cars!
MX-3 w/ curved neck millenia klde, boosted @ 5 psi. /bov and wastegate are good!/ nitto drag radial/ gutted interior/ millenia red top injectors, vortech fmu/aem wideband/ all bolts ons/ Car put together 100% by me. Mechanic? who needs a mechanic? ew.. real men work on their own cars!
50 bucks shipped for it? what the hell kind of offer is that?
I am sorry sir, but an offer like that should get you kicked off the internets.
Shipping alone is more than what he's asking for it PICKED UP.
I would be insulted if I were selling it.
That's like saying, "If you GIVE me money, I'll take your engine. Retard."
Way to go.
I am sorry sir, but an offer like that should get you kicked off the internets.
Shipping alone is more than what he's asking for it PICKED UP.
I would be insulted if I were selling it.
That's like saying, "If you GIVE me money, I'll take your engine. Retard."
Way to go.
Hey dumb a-- its just for the under drive pully!! you should read the hole post before you open your big mouth.SuperK wrote:50 bucks shipped for it? what the hell kind of offer is that?
I am sorry sir, but an offer like that should get you kicked off the internets.
Shipping alone is more than what he's asking for it PICKED UP.
I would be insulted if I were selling it.
That's like saying, "If you GIVE me money, I'll take your engine. Retard."
Way to go.
- mitmaks
- Senior Member
- Posts: 8704
- Joined: September 10th, 2001, 2:01 am
- antispam: ~SPAM*SUX~
- Location: Spokane, WA
- Contact:
Im afraid he's right, that UDP costs over $150 aloneteribble wrote:Hey dumb a-- its just for the under drive pully!! you should read the hole post before you open your big mouth.SuperK wrote:50 bucks shipped for it? what the hell kind of offer is that?
I am sorry sir, but an offer like that should get you kicked off the internets.
Shipping alone is more than what he's asking for it PICKED UP.
I would be insulted if I were selling it.
That's like saying, "If you GIVE me money, I'll take your engine. Retard."
Way to go.
Magnum s/s lines, strut bars, carbon fiber bezel, indiglow gauge, Sony Xplod, inverted c/f hood, SRD lower tie bar '93 GS SE '95 Cobra SVT #2722 '68 Charger R/T 440
http://www.cardomain.com/id/mitmaks
http://www.cardomain.com/id/mitmaks
- mitmaks
- Senior Member
- Posts: 8704
- Joined: September 10th, 2001, 2:01 am
- antispam: ~SPAM*SUX~
- Location: Spokane, WA
- Contact:
Re: [FS] KLZE with KLDE valvetrain & RR-Racing UDP
Id take it if you were shipping it.Slammed6 wrote:I am just cleaning house on all my parts and cars. So i have this motor together in my storage. It was running perfectly fine only thing is the compression was rather low for a KLZE haven't checked in a while but i believe 160-180psi per cylinder...they were all withing 5-10 psi of eachother.
Here is what u get:
NO CAMS
NO INTAKE MANIFOLD
NO OIL PAN
KL-31 Heads with KLDE valvetrain swapped over so no more dropped valves.
Heads are bolted to the block, drop a set of cams in and a intake and the motor will run.
RR-Racing anodized black UDP, by far the best looking pulley out there.
Thats all i can think of now...have any questions please feel free to ask me. I will not ship, looking for a local pick-up.
$150 picked up. The pulley alone is worth $100
Magnum s/s lines, strut bars, carbon fiber bezel, indiglow gauge, Sony Xplod, inverted c/f hood, SRD lower tie bar '93 GS SE '95 Cobra SVT #2722 '68 Charger R/T 440
http://www.cardomain.com/id/mitmaks
http://www.cardomain.com/id/mitmaks
I know what it cost but he was talking about me wanting the hole block for $50 shipped! Thats crazy I just want the pully! SuperK is out of line and just didn't understand that i only want the pully.mitmaks wrote:Im afraid he's right, that UDP costs over $150 aloneteribble wrote:Hey dumb a-- its just for the under drive pully!! you should read the hole post before you open your big mouth.SuperK wrote:50 bucks shipped for it? what the hell kind of offer is that?
I am sorry sir, but an offer like that should get you kicked off the internets.
Shipping alone is more than what he's asking for it PICKED UP.
I would be insulted if I were selling it.
That's like saying, "If you GIVE me money, I'll take your engine. Retard."
Way to go.
look at my fist post i asked if he would sale the udp ( under drive pully) alone! Yah i edited it but the only thing i add was (so ill take just the udp) just to make it more clear to him! If you would of read all the posts you would see i want just the pully for $50 shipped. Shipping wouldn't be that much i only live like 6 hours away for him. I could even go pick it up! Thanks for your 2 cents but next time maybe keep it to your self. Thanks.SuperK wrote:Last edited by teribble on November 29 2007, 10:17 PM; edited 1 time in total
Looks like you made some clarification on it
I'm sorry that I couldn't read what you didn't write until after I posted. I'm not that Super of a K. But I'll try to do the whole mind-reading exercise later.
- mitmaks
- Senior Member
- Posts: 8704
- Joined: September 10th, 2001, 2:01 am
- antispam: ~SPAM*SUX~
- Location: Spokane, WA
- Contact:
Id like the whole thing, if you can figure out how to ship it Im interested.
Magnum s/s lines, strut bars, carbon fiber bezel, indiglow gauge, Sony Xplod, inverted c/f hood, SRD lower tie bar '93 GS SE '95 Cobra SVT #2722 '68 Charger R/T 440
http://www.cardomain.com/id/mitmaks
http://www.cardomain.com/id/mitmaks
- mitmaks
- Senior Member
- Posts: 8704
- Joined: September 10th, 2001, 2:01 am
- antispam: ~SPAM*SUX~
- Location: Spokane, WA
- Contact:
has this been sold?
Magnum s/s lines, strut bars, carbon fiber bezel, indiglow gauge, Sony Xplod, inverted c/f hood, SRD lower tie bar '93 GS SE '95 Cobra SVT #2722 '68 Charger R/T 440
http://www.cardomain.com/id/mitmaks
http://www.cardomain.com/id/mitmaks