clean headlights

This forum is for discussion of topics relating to MX-3 lighting such as Headlights, Tail lights, Accessory Lights, Interior Lights, Etc. For example, Rear Euro Altezza Style Tail lights, Headlight units, LED's, HID's, Bulbs, Interior lights, Neons, Strobes, Auxillary Lights/Fogs or anything filament and gas discharge related.
Also anything dealing with the elctrical system.
Post Reply
94mxthree
Regular Member
Posts: 48
Joined: November 17th, 2007, 6:44 pm

clean headlights

Post by 94mxthree »

Is there a product on the market that will take the cloud out of these mx3 headlights,i cant find anything,does anybody have any tricks to the trade of clearing them up? thanks.
Whisper
Regular Member
Posts: 946
Joined: April 13th, 2007, 12:34 am
Location: Seattle, WA

Post by Whisper »

Get some plastic polish and polish them up with that. They'll be as good as new.
94mxthree
Regular Member
Posts: 48
Joined: November 17th, 2007, 6:44 pm

Post by 94mxthree »

Where do you find a polish made for plastic? does auto zone or oreillys sell it?
Whisper
Regular Member
Posts: 946
Joined: April 13th, 2007, 12:34 am
Location: Seattle, WA

Post by Whisper »

I got mine from Schucks, so I imagine Autozone would have it too.
User avatar
rekognize
Regular Member
Posts: 809
Joined: September 2nd, 2006, 10:58 am
Location: Toronto, ON
Contact:

Post by rekognize »

Walmart sells Meguiars (sp?) PlastX ... works awesome
94mxthree
Regular Member
Posts: 48
Joined: November 17th, 2007, 6:44 pm

Post by 94mxthree »

Hey thanks you guys for this information,I'll check into it tomorrow.
Volones
Regular Member
Posts: 157
Joined: August 10th, 2007, 11:34 am
Location: Kentucky, USA

Post by Volones »

I second the PlastX, it works exceedingly well and takes very little time/effort.
I got mine at autozone.
Current Hypermiler, future EcoModder.
User avatar
Custommx3
Site Administrator
Posts: 8391
Joined: November 7th, 2000, 2:01 am
antispam: ~SPAM*SUX~
Location: Lat 35.1N Lon -90W
Contact:

Post by Custommx3 »

APPEARANCE FAQ
94mxthree
Regular Member
Posts: 48
Joined: November 17th, 2007, 6:44 pm

Post by 94mxthree »

Ops sorry, didn't even see the appearance section,but just a note tho,i used some plastic x from Maguire's,the lights look brand spanking new .
Post Reply

Return to “Electrical & Lighting”