[FS] '95 MX-3 and Rare BPD GTR engine installed. Price Negot
- MechaManZero
- Regular Member
- Posts: 690
- Joined: March 20th, 2006, 7:36 pm
[FS] '95 MX-3 and Rare BPD GTR engine installed. Price Negot
Asking 3,000
Car has The engine put in it and a protege transmission with a centerforce dual friction clutch.
I bought the car origionally for $2,000
Engine (including AWD transmission) cost me $1,700
Bought intercooler for $318
Protege Tranny was about $400
Bought Manual Speedo Cluster for $50
SS Brake Hoses $100
Clutch $300
Honda Radiator to allow IC piping access $100
Many more parts.
Needs Exhaust and engine management system. Minor fixes needed front bumper cut for intercooler. Minor body work. More pictures coming. Great Price. Contact me on myspace at http://www.myspace.com/mechamanzero
Will negotiate but the price is already pretty damn low lmao. Buyer pays full amount when they pick up the car with cash. No checks. Unless its a bank check.
More pictures in my worklog:
http://www.mx-3.com/phpbb2/viewtopic.php?t=53195
Car has The engine put in it and a protege transmission with a centerforce dual friction clutch.
I bought the car origionally for $2,000
Engine (including AWD transmission) cost me $1,700
Bought intercooler for $318
Protege Tranny was about $400
Bought Manual Speedo Cluster for $50
SS Brake Hoses $100
Clutch $300
Honda Radiator to allow IC piping access $100
Many more parts.
Needs Exhaust and engine management system. Minor fixes needed front bumper cut for intercooler. Minor body work. More pictures coming. Great Price. Contact me on myspace at http://www.myspace.com/mechamanzero
Will negotiate but the price is already pretty damn low lmao. Buyer pays full amount when they pick up the car with cash. No checks. Unless its a bank check.
More pictures in my worklog:
http://www.mx-3.com/phpbb2/viewtopic.php?t=53195
Çlark
95 Mazda MX3 4 Banger
Currently: H&R Lowering springs, BPT from a GTR, 18.5x6x3.5 same side inlet and outlet intercooler, Centerforce Dual Friction clutch
For BPT Frorums - http://www.aokforums.com/mazdaengines/
95 Mazda MX3 4 Banger
Currently: H&R Lowering springs, BPT from a GTR, 18.5x6x3.5 same side inlet and outlet intercooler, Centerforce Dual Friction clutch
For BPT Frorums - http://www.aokforums.com/mazdaengines/
- MechaManZero
- Regular Member
- Posts: 690
- Joined: March 20th, 2006, 7:36 pm
Also engine has 50,000 miles on it.
Don't worry that credit card number doesn't work anymore in the first image so if you try it your screwed lmao
Çlark
95 Mazda MX3 4 Banger
Currently: H&R Lowering springs, BPT from a GTR, 18.5x6x3.5 same side inlet and outlet intercooler, Centerforce Dual Friction clutch
For BPT Frorums - http://www.aokforums.com/mazdaengines/
95 Mazda MX3 4 Banger
Currently: H&R Lowering springs, BPT from a GTR, 18.5x6x3.5 same side inlet and outlet intercooler, Centerforce Dual Friction clutch
For BPT Frorums - http://www.aokforums.com/mazdaengines/
- mx3autozam
- Senior Member
- Posts: 2950
- Joined: September 24th, 2005, 9:09 pm
- Location: Kitchener
- MechaManZero
- Regular Member
- Posts: 690
- Joined: March 20th, 2006, 7:36 pm
yeah buddy all of them, I can take more pictures of the reciepts, I gotta take pictures at my fathers too.
Also I have a T3/T4 selling at 70 bucks + whatever shipping. Needs a rebuild, it is a turbonetics. Came off an s2000
Also I have a T3/T4 selling at 70 bucks + whatever shipping. Needs a rebuild, it is a turbonetics. Came off an s2000
Çlark
95 Mazda MX3 4 Banger
Currently: H&R Lowering springs, BPT from a GTR, 18.5x6x3.5 same side inlet and outlet intercooler, Centerforce Dual Friction clutch
For BPT Frorums - http://www.aokforums.com/mazdaengines/
95 Mazda MX3 4 Banger
Currently: H&R Lowering springs, BPT from a GTR, 18.5x6x3.5 same side inlet and outlet intercooler, Centerforce Dual Friction clutch
For BPT Frorums - http://www.aokforums.com/mazdaengines/
- MechaManZero
- Regular Member
- Posts: 690
- Joined: March 20th, 2006, 7:36 pm
Come on people, I know you want it
Çlark
95 Mazda MX3 4 Banger
Currently: H&R Lowering springs, BPT from a GTR, 18.5x6x3.5 same side inlet and outlet intercooler, Centerforce Dual Friction clutch
For BPT Frorums - http://www.aokforums.com/mazdaengines/
95 Mazda MX3 4 Banger
Currently: H&R Lowering springs, BPT from a GTR, 18.5x6x3.5 same side inlet and outlet intercooler, Centerforce Dual Friction clutch
For BPT Frorums - http://www.aokforums.com/mazdaengines/
- Mooneggs
- Forum Moderator
- Posts: 6128
- Joined: August 10th, 2005, 10:08 pm
- antispam: ~SPAM*SUX~
- Location: Hillsboro, OR
- Contact:
I would not buy a car I could not see pics of I see lots of pics of the motor (in your worklog) but we need PICS of the car PLEASE SIR
also if someone buys it will they have to tow it away? is it driveable? are you including the AWD transmission to the person who buys it?
also if someone buys it will they have to tow it away? is it driveable? are you including the AWD transmission to the person who buys it?
My Feedback
92 mx-3 gs klze 'race car' IP 15.05 @ 92.5mph
92 mx-3 gs klze 'daily driver' IP 14.55 @ 95.7mph
http://www.cardomain.com/id/Mooneggs
92 mx-3 gs klze 'race car' IP 15.05 @ 92.5mph
92 mx-3 gs klze 'daily driver' IP 14.55 @ 95.7mph
http://www.cardomain.com/id/Mooneggs
- MechaManZero
- Regular Member
- Posts: 690
- Joined: March 20th, 2006, 7:36 pm
you must be blind, worklog link included with pics, also said getting more at my father's, happening tomorrow
Çlark
95 Mazda MX3 4 Banger
Currently: H&R Lowering springs, BPT from a GTR, 18.5x6x3.5 same side inlet and outlet intercooler, Centerforce Dual Friction clutch
For BPT Frorums - http://www.aokforums.com/mazdaengines/
95 Mazda MX3 4 Banger
Currently: H&R Lowering springs, BPT from a GTR, 18.5x6x3.5 same side inlet and outlet intercooler, Centerforce Dual Friction clutch
For BPT Frorums - http://www.aokforums.com/mazdaengines/
-
- Senior Member
- Posts: 2165
- Joined: December 7th, 2002, 2:01 am
- Location: windsor, ontario
- Contact:
i think he meant pics of the entire car not just the front clip i'm soooo mad you didn't sell this about 1.5 years ago... would have saved me tons on the car i'm dong now and tons of time cause i still have to swap to the newer dash and everything else on mine... good luck with the sale
ProjectMx
My BP and AWD build thread
Cardomain
93 Mx-3 GS with bp and GTR AWD system
93 Escort GT daily driving
My BP and AWD build thread
Cardomain
93 Mx-3 GS with bp and GTR AWD system
93 Escort GT daily driving
- MechaManZero
- Regular Member
- Posts: 690
- Joined: March 20th, 2006, 7:36 pm
LOL its all good. Yeah I am gonna get pictures at my dads at somepoint it was raining yesterday. I put the gauges in a sweet spot right by the shifter so it looks spiffy. Hopefully tomorrow if it doesn't rain.
Çlark
95 Mazda MX3 4 Banger
Currently: H&R Lowering springs, BPT from a GTR, 18.5x6x3.5 same side inlet and outlet intercooler, Centerforce Dual Friction clutch
For BPT Frorums - http://www.aokforums.com/mazdaengines/
95 Mazda MX3 4 Banger
Currently: H&R Lowering springs, BPT from a GTR, 18.5x6x3.5 same side inlet and outlet intercooler, Centerforce Dual Friction clutch
For BPT Frorums - http://www.aokforums.com/mazdaengines/
- MechaManZero
- Regular Member
- Posts: 690
- Joined: March 20th, 2006, 7:36 pm
Havent had time to get pictures but here are a few
I got to clean the car lol. I'll be cleaning it and getting pictures during daytime so its more visible but wanted to show where the gauges where placed which is a sweet spot.
Çlark
95 Mazda MX3 4 Banger
Currently: H&R Lowering springs, BPT from a GTR, 18.5x6x3.5 same side inlet and outlet intercooler, Centerforce Dual Friction clutch
For BPT Frorums - http://www.aokforums.com/mazdaengines/
95 Mazda MX3 4 Banger
Currently: H&R Lowering springs, BPT from a GTR, 18.5x6x3.5 same side inlet and outlet intercooler, Centerforce Dual Friction clutch
For BPT Frorums - http://www.aokforums.com/mazdaengines/
-
- Supporting Member
- Posts: 1460
- Joined: September 28th, 2001, 2:01 am
- Location: Killa Queenz NYC
- Contact: