is this a g-series tranny or an f-series tranny?

se7en · Post by **se7en** » October 15th, 2007, 8:05 pm

okay, I pulled a tranny from a 1992 probe gt.(5 speed)

is it the g-series or the crappy f-series?

thanks

7

Nd4SpdSe · Post by **Nd4SpdSe** » October 15th, 2007, 8:46 pm

1992? If that's the case that's from a 2.2L Turbo, right? I have no idea what trans is in those cars, but I got a feeling it may be neither F or G

cyclonekid78 · Post by **cyclonekid78** » October 15th, 2007, 9:10 pm

That should be a K series tranny.

se7en · Post by **se7en** » October 15th, 2007, 9:24 pm

the tranny came from a probe gt, V6 model.

and yes it has to be a f series or g series.

I am pretty sure.

7

cyclonekid78 · Post by **cyclonekid78** » October 15th, 2007, 9:52 pm

I thought the G and F series trannys only came on the 1.8s and 1.6, and the K was on the bigger 4 cylinders and v6s

Thats a G

Thats a F

This image sucks but its a K

Hope that helps

se7en · Post by **se7en** » October 16th, 2007, 1:40 am

okay, which tranny is the strongest?

the mx-3(1.8L V6) mtx, the ford probe gt(2.5L V6) or others?

thanks again for all the help.

Mnemonic · Post by **Mnemonic** » October 16th, 2007, 1:51 am

there the same tranny, i've used both and there is no real difference, and mine now has a bit of the wear and tear that my old one did so i'd have to say there pretty much the same quality when we're talking strength

se7en · Post by **se7en** » October 16th, 2007, 1:53 am

so, are the mx-3 v6 and probe gt v6 tranny's labeled the same or are they different(eg f series and g-series?)

7

Post by **Mooneggs** » October 16th, 2007, 10:12 am

I sure am glad that somebody asked this question. I've always wondered the difference between a G and an F...

thanks for posting the pics

se7en · Post by **se7en** » October 16th, 2007, 11:57 am

well, I went out and checked mine, and it doesn't look anything at all like any of those in the pics.

I wonder ....when I pulled the tranny out of the donor car, everything came apart easy, and it had a brand new clutch in it(still had a trace of writing on the clutch face.) maybe the last person put something else that I don't know about in his probeGT.

who knows, I will tell all when I get it running later today.

7

mx3autozam · Post by **mx3autozam** » October 18th, 2007, 12:53 am

Mooneggs wrote:I sure am glad that somebody asked this question. I've always wondered the difference between a G and an F...

thanks for posting the pics

G is for the v6
F is for the 4cylinder

mx3autozam · Post by **mx3autozam** » October 18th, 2007, 12:55 am

This might be something to post in this thread

se7en · Post by **se7en** » October 18th, 2007, 1:14 am

sweet, that means that I have the g25m-r from a 1993(I think that the probegt should be the same) I have the 1992 model, and did the atx-mtx swap.

btw: that is exactly what I was looking for, thanks mx-3autozam!

YAY, I just got the atx-,mtx swap done tonite!

Runs awesome. I love 5-speeds.

Everyone should do this swap, it is way better than before(sic auto).

but be warned, I spent about 10-12 hours on this swap!

and the biggest Pain In The A$$ was the pedal swapping part(especially because I got my pedals from a probe gt, and they weren't exactly the same!

anyway, thanks for all the help people!

7

Yoda · Post by **Yoda** » October 23rd, 2007, 10:30 pm

Mooneggs wrote:I sure am glad that somebody asked this question. I've always wondered the difference between a G and an F...

thanks for posting the pics

The break down on the trannies according to my documentation is as follow:

First letter:
F = 20 spline input shaft
G = 22 spline input shaft
H = 23 spline input shaft

First digit:
Production revision (1 or no digit, 2 or 3)

4 = 4 Gears
5 = 5 Gears

M = Manual

R = Remote Shift Control

X = AWD

mx3autozam · Post by **mx3autozam** » October 23rd, 2007, 10:59 pm

Yoda wrote: The break down on the trannies according to my documentation is as follow:

First letter:
F = 20 spline input shaft
G = 22 spline input shaft
H = 23 spline input shaft

First digit:
Production revision (1 or no digit, 2 or 3)

4 = 4 Gears
5 = 5 Gears

M = Manual

R = Remote Shift Control

X = AWD

well that makes sense according to the chart I have posted. But they all have R for "Remote shift control" so what exactly is that then?