installing front bushings!!

Legato626 · Post by **Legato626** » September 23rd, 2007, 7:52 pm

I have 94 mx-3 GS and set of poly bushings that I want to put on and i am having problems getting them on. My sway bar links are not coming off so I am just going to cut them off and get new ones this will let me get my control arm off. But the rear part of the control arm has the mount that can come off. Is there a metal sleeve I need to keep to use on the new ones?

mowambi · Post by **mowambi** » September 23rd, 2007, 10:05 pm

id replace them why you are there. They arnt very expensive (like 22 something at the local stealership), but i had to cut mine off to replace as the bolts were like as soft as jello from all my rust (1992)

lakersfan1 · Post by **lakersfan1** » September 29th, 2007, 3:34 pm

Are we talking about the A-Arm bushings? And which brand ones are you installing?

And I thought you lived in Dakota, not Vegas?

mx3autozam · Post by **mx3autozam** » October 1st, 2007, 11:33 pm

What sleeve are you talking about. the sleeve is inside the bushing or if you ahev srd's tehre is no sleeve.