ecu pin outs

monty73741 · Post by **monty73741** » September 23rd, 2007, 9:11 pm

is there a difference in the dohc mx-3 ecu pinout & the miata 1.6l dohc pinout

Tunes67 · Post by **Tunes67** » September 23rd, 2007, 9:29 pm

I cant tell you Which wires are different.. I can tell you there is at least one difference. The miata's were a distributorless engine.. relying on coilpacks for ignition.. as such the system needed and had a crank position sensor which our B6 engines didnt have.

Tunes67

monty73741 · Post by **monty73741** » September 24th, 2007, 1:25 am

Tunes67 wrote:I cant tell you Which wires are different.. I can tell you there is at least one difference. The miata's were a distributorless engine.. relying on coilpacks for ignition.. as such the system needed and had a crank position sensor which our B6 engines didnt have.

Tunes67

then they are different boom slang has an harness adapter from the miata to plug & play a sfac, i emailed them before about making a harness, they will, but i posted in new products & really got no response.
they also make adapter plugs

Xtremethings · Post by **Xtremethings** » September 25th, 2007, 11:37 pm

monty73741 wrote:is there a difference in the dohc mx-3 ecu pinout & the miata 1.6l dohc pinout

Hey Monty!

PATDIESEL · Post by **PATDIESEL** » September 26th, 2007, 12:06 pm

The earlier B6 Miata engines had disties... I don't know what year they switched, but they haven't always been distyless.

Tunes67 · Post by **Tunes67** » September 26th, 2007, 12:13 pm

Thats weird Pat.. cause napa showed distributorless for the B6 in the miata from its production beginning. I'll be heading to my mazda dealer later this week and I will ask them. Doesnt mean Napa's books are correct.. wouldnt be the first time a automotive manual was wrong

Tunes67

Tunes67 · Post by **Tunes67** » September 26th, 2007, 12:20 pm

In fact.. just now on http://www.napaonline.com when looking up ignition parts for a 1990 Miata.. they dont list a distributor and for a coil they show this..

They also list crankshaft sensors for them as well.

Tunes67

10secSim · Post by **10secSim** » March 30th, 2008, 12:15 pm

Hey guys I was searching to try to find out what type of crank position sensor is in the B6 94-96. Had no luck yet, I'm sure one of you guys know this, and this would be an appropriat post to ask this on instead of starting a new thread again. lol thanks for the help

MX-3.com

ecu pin outs

ecu pin outs

Re: ecu pin outs

Re: ecu pin outs