[FS] Megasquirt Group Buy @ ProbeTalk
- Nd4SpdSe
- Senior Member
- Posts: 11212
- Joined: May 25th, 2002, 2:01 am
- Location: Québec City, Quebec, Canada
- Contact:
[FS] Megasquirt Group Buy @ ProbeTalk
I hope the mods don't mind if I post this
For those that don't visit or visit ProbeTalk often, there's a group buy for Megasquirt buids going on. I figured I'd spread the word since I've been waiting for one myself, but I stopped checking back after it was said that there more likely wasn't going to be another one and would of definitely missed it if it wasn't for n2ogsze.
As per their BB rules, it's only valid for 30 days, so I'll expire on July 29th.
Thread is here:
http://forums.probetalk.com/showthread.php?t=1701233196
If your interested in it, probably would be good to take advantage of it since it may be another year for the next one.
For those that don't visit or visit ProbeTalk often, there's a group buy for Megasquirt buids going on. I figured I'd spread the word since I've been waiting for one myself, but I stopped checking back after it was said that there more likely wasn't going to be another one and would of definitely missed it if it wasn't for n2ogsze.
As per their BB rules, it's only valid for 30 days, so I'll expire on July 29th.
Thread is here:
http://forums.probetalk.com/showthread.php?t=1701233196
If your interested in it, probably would be good to take advantage of it since it may be another year for the next one.
1992 Mazda Mx-3 GSR - 2.5L KLZE : Award Winning Show Car & Race Car ['02-'09] (Retired)
2004 Mazda RX-8 GT - Renesis Wankel : LS3 Coils, BHR Mid-Pipe + Falken RT-615K 245/40r18
2011 Mazda Mazda2 GS - 1.5L Manual : Yozora Edition (1 of 500)
2003 Nissan Xterra SE - 4x4 Supercharged : 2" Body Lift, 4" Suspension Lift & 33" MTR Kevlar
2001 Nissan Frontier SE - The Frontrailer : Expedition/Off-Road Trailer Project
2004 Mazda RX-8 GT - Renesis Wankel : LS3 Coils, BHR Mid-Pipe + Falken RT-615K 245/40r18
2011 Mazda Mazda2 GS - 1.5L Manual : Yozora Edition (1 of 500)
2003 Nissan Xterra SE - 4x4 Supercharged : 2" Body Lift, 4" Suspension Lift & 33" MTR Kevlar
2001 Nissan Frontier SE - The Frontrailer : Expedition/Off-Road Trailer Project
-
- Supporting Member
- Posts: 1460
- Joined: September 28th, 2001, 2:01 am
- Location: Killa Queenz NYC
- Contact:
-
- Senior Member
- Posts: 6451
- Joined: June 19th, 2004, 2:01 am
- Location: El Paso Tx U.S
- Contact:
Order sent w00 Turbo the right way here we go..
I got the econ my pak. well its pending his reply.
I only need for the ecu NOT to auto adjust the timing.. it says we can manually set it using a timing light. That way I can retard it.
Im waiting on his reply. did anyone mail payment yet?
I got the econ my pak. well its pending his reply.
I only need for the ecu NOT to auto adjust the timing.. it says we can manually set it using a timing light. That way I can retard it.
Im waiting on his reply. did anyone mail payment yet?
-hec
MX-3 w/ curved neck millenia klde, boosted @ 5 psi. /bov and wastegate are good!/ nitto drag radial/ gutted interior/ millenia red top injectors, vortech fmu/aem wideband/ all bolts ons/ Car put together 100% by me. Mechanic? who needs a mechanic? ew.. real men work on their own cars!
MX-3 w/ curved neck millenia klde, boosted @ 5 psi. /bov and wastegate are good!/ nitto drag radial/ gutted interior/ millenia red top injectors, vortech fmu/aem wideband/ all bolts ons/ Car put together 100% by me. Mechanic? who needs a mechanic? ew.. real men work on their own cars!
-
- Supporting Member
- Posts: 1460
- Joined: September 28th, 2001, 2:01 am
- Location: Killa Queenz NYC
- Contact:
- mx3autozam
- Senior Member
- Posts: 2950
- Joined: September 24th, 2005, 9:09 pm
- Location: Kitchener
-
- Supporting Member
- Posts: 1460
- Joined: September 28th, 2001, 2:01 am
- Location: Killa Queenz NYC
- Contact:
-
- Senior Member
- Posts: 6451
- Joined: June 19th, 2004, 2:01 am
- Location: El Paso Tx U.S
- Contact:
ordered the color coded harness too. Not to bad
-hec
MX-3 w/ curved neck millenia klde, boosted @ 5 psi. /bov and wastegate are good!/ nitto drag radial/ gutted interior/ millenia red top injectors, vortech fmu/aem wideband/ all bolts ons/ Car put together 100% by me. Mechanic? who needs a mechanic? ew.. real men work on their own cars!
MX-3 w/ curved neck millenia klde, boosted @ 5 psi. /bov and wastegate are good!/ nitto drag radial/ gutted interior/ millenia red top injectors, vortech fmu/aem wideband/ all bolts ons/ Car put together 100% by me. Mechanic? who needs a mechanic? ew.. real men work on their own cars!
- Mooneggs
- Forum Moderator
- Posts: 6128
- Joined: August 10th, 2005, 10:08 pm
- antispam: ~SPAM*SUX~
- Location: Hillsboro, OR
- Contact:
so if I ever decide to do nitrous or turbo on my klze this would be a good investment? How much would these setups normally cost?
I'm leaning towards the econo setup just because I am not sure what options I would need...
I'm leaning towards the econo setup just because I am not sure what options I would need...
My Feedback
92 mx-3 gs klze 'race car' IP 15.05 @ 92.5mph
92 mx-3 gs klze 'daily driver' IP 14.55 @ 95.7mph
http://www.cardomain.com/id/Mooneggs
92 mx-3 gs klze 'race car' IP 15.05 @ 92.5mph
92 mx-3 gs klze 'daily driver' IP 14.55 @ 95.7mph
http://www.cardomain.com/id/Mooneggs
-
- Regular Member
- Posts: 603
- Joined: August 2nd, 2001, 2:01 am
- Location: Brantford, Ontario, Canada
- Contact:
A used one listed here:
https://marketplace.grassrootsmotorspor ... age838.htm
Not part of the group buy, but maybe somebody wants to spend less if they are close to it. Have no idea if its the same, but it says megasquirt.
https://marketplace.grassrootsmotorspor ... age838.htm
Not part of the group buy, but maybe somebody wants to spend less if they are close to it. Have no idea if its the same, but it says megasquirt.
92 MX-3 GS 2.5 KLZE
14.385 @ 98.21
14.385 @ 98.21
- ScooterBovine
- Supporting Member
- Posts: 502
- Joined: May 9th, 2004, 2:01 am
- Location: Blacklick, Ohio
Please tell me what I need here.
I have a KLZE, no mods. Running the K8 ECU and VAF.
So all I need is the Economy MS system and the wiring harness, and the IAT sensor (intake air temp) to make this work?
And this will allow me to not have to buy the KLZE ECU and VAF?
Or am I way off in left field?
I have a KLZE, no mods. Running the K8 ECU and VAF.
So all I need is the Economy MS system and the wiring harness, and the IAT sensor (intake air temp) to make this work?
And this will allow me to not have to buy the KLZE ECU and VAF?
Or am I way off in left field?
No more MX-3.
-
- Senior Member
- Posts: 6451
- Joined: June 19th, 2004, 2:01 am
- Location: El Paso Tx U.S
- Contact:
No need to buy klze ecu and vaf.
-hec
MX-3 w/ curved neck millenia klde, boosted @ 5 psi. /bov and wastegate are good!/ nitto drag radial/ gutted interior/ millenia red top injectors, vortech fmu/aem wideband/ all bolts ons/ Car put together 100% by me. Mechanic? who needs a mechanic? ew.. real men work on their own cars!
MX-3 w/ curved neck millenia klde, boosted @ 5 psi. /bov and wastegate are good!/ nitto drag radial/ gutted interior/ millenia red top injectors, vortech fmu/aem wideband/ all bolts ons/ Car put together 100% by me. Mechanic? who needs a mechanic? ew.. real men work on their own cars!
- ScooterBovine
- Supporting Member
- Posts: 502
- Joined: May 9th, 2004, 2:01 am
- Location: Blacklick, Ohio
-
- Senior Member
- Posts: 6451
- Joined: June 19th, 2004, 2:01 am
- Location: El Paso Tx U.S
- Contact:
you guys better get in on this! this is the last BB hes doing.
-hec
MX-3 w/ curved neck millenia klde, boosted @ 5 psi. /bov and wastegate are good!/ nitto drag radial/ gutted interior/ millenia red top injectors, vortech fmu/aem wideband/ all bolts ons/ Car put together 100% by me. Mechanic? who needs a mechanic? ew.. real men work on their own cars!
MX-3 w/ curved neck millenia klde, boosted @ 5 psi. /bov and wastegate are good!/ nitto drag radial/ gutted interior/ millenia red top injectors, vortech fmu/aem wideband/ all bolts ons/ Car put together 100% by me. Mechanic? who needs a mechanic? ew.. real men work on their own cars!