underpresure @ shortneck KLZE

V6 Technical/Performance Discussions
Post Reply
war_spider
Regular Member
Posts: 36
Joined: January 12th, 2007, 7:55 am
Location: Aachen (Germany)
Contact:

underpresure @ shortneck KLZE

Post by war_spider »

(wo wird der Unterdruckschlauch angeschlossen? für die die deutsch können)

in engl. : wheres the other end of this underpressure hose???

Image
-= loud pipes save lifes =-

KL-ZE inside!
User avatar
solo_ryder
Senior Member
Posts: 6289
Joined: October 16th, 2004, 2:01 am
Location: British Columbia

Post by solo_ryder »

Hmm, well you can use that for a few things. I know a few ppl that are using that for a PVC valve connection. I use that nipple for my cruise control on my car..
hgallegos915
Senior Member
Posts: 6451
Joined: June 19th, 2004, 2:01 am
Location: El Paso Tx U.S
Contact:

Post by hgallegos915 »

Mine goes to the vacuum purge solenoid.
-hec

MX-3 w/ curved neck millenia klde, boosted @ 5 psi. /bov and wastegate are good!/ nitto drag radial/ gutted interior/ millenia red top injectors, vortech fmu/aem wideband/ all bolts ons/ Car put together 100% by me. Mechanic? who needs a mechanic? ew.. real men work on their own cars!
User avatar
mx3autozam
Senior Member
Posts: 2950
Joined: September 24th, 2005, 9:09 pm
Location: Kitchener

Post by mx3autozam »

I have a cap on mine
93 Mazda MX3 KLZE Turbo
User avatar
papa roached
Senior Member
Posts: 2761
Joined: December 10th, 2002, 2:01 am
Location: Montgomery, WVa

Post by papa roached »

run mine as the pcv
93 MX-3 GS (collecting parts for Eunos Presso conversion), 94 626 Transmission (4.10 gears), KL31 camed KL-ZE, Millenia intake, Millenia TB, SSAutochrome V2 headers, Magnaflow cat, 2 1/4 in pipe, Top Speed Pro 1 muffler, 9lb Fidanza Flywheel, ACT clutch, Corksport SS clutch line, Corksport SS brake lines, Unorthadox UDP, 255 lph fuel pump, HEI mod, ghetto-charger intake, KL36 ECU, SRD transverse crossmember bushings, SRD shifter extention bushing, SRD crossmember, Corksport bronzoil shifter bushings, Brembo Crossdrilled and Slotted rotors, 15 inch Konig Heliums, ZX-2 S/R struts, Eibach lowering springs, OEM front strut bar, Ebay rear strut bar, BFGoodrich G-Force T/A KDWs

Parts needing installed: turbo kit from BB (if i ever get it), 9.0:1 CR Diamond pistons, 4340 forged H beam rods, C/J-Spec spoiler, Nissan red tops in KL rails
http://www.cardomain.com/id/blazejeremy
Post Reply

Return to “V6 Technical/Performance”