Hi I just bought a Bp turbo so i'm parting out my beloved parts i
was going to slap on my B6 Mx3<p>I am parting out <p>1) tip top condition IHI VJ05 turbo (upgrade to a Vj14) it pushes
out more CFM if i'm not mistaking...the turbo is pretty much the
same as a VJ11(pretty much the same specs)...the turbo was rebuilt
and balanced before i bought it and there is almost no shaft play....<p>325$ CANADIAN<p>2) Brand New in the box MAZDA 323 B6T GTX/GT PISTONS....everything
is there (piston pin and locking pin)...pretty hard and long to get
as it took at least a month if not more to get mine!<p>250$ CANADIAN<p>3) 323 B6T GTX turbo manifold cracked like pretty much all the gtx
manifolds but repaired.<p>85$ CANADIAN<p>4) 626/MX6 2L turbo manifold, very good condition<p>50$ CANADIAN<p>thats all!<p>If your interested PM me @ mx3_jmcb@hotmail.com<p>[ February 12, 2003: Message edited by: 94mx3rsr ]<p>[ February 13, 2003: Message edited by: 94mx3rsr ]</p>
MX3 1.6L DOHC TURBO "KIT" PARTS!!! (turbo, pis
-
- Regular Member
- Posts: 122
- Joined: July 24th, 2001, 2:01 am
- Location: Quebec, Canada
- Contact:
MX3 1.6L DOHC TURBO "KIT" PARTS!!! (turbo, pis
Jean-Michel Basque
STOCK BPT @ 8.5PSI
3 RUNS ON THE 1/4 = 14.85 @ 96
STOCK BPT @ 8.5PSI
3 RUNS ON THE 1/4 = 14.85 @ 96
-
- Regular Member
- Posts: 122
- Joined: July 24th, 2001, 2:01 am
- Location: Quebec, Canada
- Contact:
Re: MX3 1.6L DOHC TURBO "KIT" PARTS!!! (turbo, pis
photos of my turbo ;
<p><p><p>
<p><p><p>
Jean-Michel Basque
STOCK BPT @ 8.5PSI
3 RUNS ON THE 1/4 = 14.85 @ 96
STOCK BPT @ 8.5PSI
3 RUNS ON THE 1/4 = 14.85 @ 96
-
- Regular Member
- Posts: 122
- Joined: July 24th, 2001, 2:01 am
- Location: Quebec, Canada
- Contact:
Re: MX3 1.6L DOHC TURBO "KIT" PARTS!!! (turbo, pis
My turbo and manifold are plug in on the DOHC B6 from the 94 + mx3....so if you want a turbo setup...its the stuff you should buy!
Jean-Michel Basque
STOCK BPT @ 8.5PSI
3 RUNS ON THE 1/4 = 14.85 @ 96
STOCK BPT @ 8.5PSI
3 RUNS ON THE 1/4 = 14.85 @ 96
-
- Regular Member
- Posts: 44
- Joined: January 13th, 2003, 2:01 am
- Location: ohio
- Contact:
Re: MX3 1.6L DOHC TURBO "KIT" PARTS!!! (turbo, pis
do u know if the manifold will fit a mx-3 94.
Let me know. thanx
Let me know. thanx
-
- Regular Member
- Posts: 122
- Joined: July 24th, 2001, 2:01 am
- Location: Quebec, Canada
- Contact:
Re: MX3 1.6L DOHC TURBO "KIT" PARTS!!! (turbo, pis
FITS LIKE A GLOVE ON A 94+ MX-3 1.6L DOHC !!!
Jean-Michel Basque
STOCK BPT @ 8.5PSI
3 RUNS ON THE 1/4 = 14.85 @ 96
STOCK BPT @ 8.5PSI
3 RUNS ON THE 1/4 = 14.85 @ 96
-
- Regular Member
- Posts: 44
- Joined: January 13th, 2003, 2:01 am
- Location: ohio
- Contact:
Re: MX3 1.6L DOHC TURBO "KIT" PARTS!!! (turbo, pis
cheack your mail;.