k8 injector stock flow rate

[whitemike10601]

does anybody know what the stock injector rate is on the v6; looking to uprgade. also where can i get some headers.
thanks

[96mx-3]

headers on ebay fopr a 2.5 l probe fit...not worth it i dont think..i have em ..every one will tell you to swap motor so..

[babyblueMX3]

does anybody know what the stock injector rate is on the v6; looking to uprgade. also where can i get some headers.
thanks

stock injectors on the k8 is 180cc
kl are 220cc

[whitemike10601]

ok, thanks. any suggestions on fuel injection upgrades

[babyblueMX3]

stock 180cc are plenty if N/A. Why do you want to upgrade ?

[whitemike10601]

more power

[babyblueMX3]

you won't get "more power" out of injectors. You need injectors when you got other parts installed that "Requires" more fuel.
Like I said, nothing you can add to the mx-3 except turbo or s/c (maybe a crazy N/A set-up that 99.9% of people here will never have) will require other injectors than stock.

Keep the stockers and play with a fuel pressure regulator instead. There is plenty of fuel needed there.

[whitemike10601]

ok. so would this would change the a/f ratio right? what is the ideal a/f for the k8?

[babyblueMX3]

ok. so would this would change the a/f ratio right? what is the ideal a/f for the k8?

you can change the a/f ratio without changing injectors. Like I said buy a fuel pressure regulator and play with it and you'll get different a/f numbers. You won't get precise reading without a wideband 02 sensor though.