distributor

93-mx-3 · Post by **93-mx-3** » March 31st, 2007, 2:03 pm

will any other distributor fit on my b6 sohc?

Tropical Emerald 1993 · April 1st, 2007, 7:11 am

What's wrong with it?

93-mx-3 · Post by **93-mx-3** » April 1st, 2007, 10:47 am

the main housing is crached..not the cap..the metal housing...... :cry:

lost_mx3 · Post by **lost_mx3** » April 1st, 2007, 6:10 pm

As far as I know, the only alternative is one from a miata. But with those you have to get the coil pack and find a place for it because it's not all together. Heard it's an upgrade tho because you can mount it away from the motor and keep the coil cooler giving better performance from it.

ariesdude · Post by **ariesdude** » April 1st, 2007, 10:12 pm

lost_mx3 wrote:As far as I know, the only alternative is one from a miata. But with those you have to get the coil pack and find a place for it because it's not all together. Heard it's an upgrade tho because you can mount it away from the motor and keep the coil cooler giving better performance from it.

90-94 protege 1.8 distys will fit - 91-96 Escort/Tracer 1.8L will fit i think - 90-94 323s have the same engine (so it will fit). Miata distys will not plug n play for SOHC.

http://cgi.ebay.com/ebaymotors/100-Bran ... enameZWDVW

lost_mx3 · Post by **lost_mx3** » April 1st, 2007, 11:27 pm

And that's why I should read the whole post before replying. One of the mechanics at the shop that did some body work for me said that I should do it and get a little more out of the 1.6. But mine is a dohc.

ariesdude · Post by **ariesdude** » April 2nd, 2007, 11:29 am

For DOHC models 95-98 protege distys will be plug n play. Even miata models without coil packs should be plug n play. And there are plenty of them on ebay i think....

93-mx-3 · Post by **93-mx-3** » April 2nd, 2007, 7:53 pm

alrite thats good to no...thanx for the help...

Tunes67 · Post by **Tunes67** » April 2nd, 2007, 8:03 pm

Where is the disty located in the miata engines? Since they are a RWD setup.. the disty has to be located someplace different than where they are located on the B6 FWD engines. Or they would have to be shaped differently I would think. I am not saying they arent compatible.. just curious is all.

Tunes67

ariesdude · Post by **ariesdude** » April 2nd, 2007, 11:57 pm

Every miata i have seen so far had coilpacks - they dont have a distributor per se - they have a (disty like) cam sensor mounted in the same spot.

The local mech guy at the mazda dealer swore that there are miata models without coilpacks....