acceleration times

V6 Technical/Performance Discussions
Post Reply
MX3KEV21
Regular Member
Posts: 62
Joined: December 25th, 2006, 9:23 pm
Location: SCOTLAND

acceleration times

Post by MX3KEV21 »

my stock k8 does 0 to 100mph in 20 seconds is this normal or is it a tad slow for this type of car? what times do you get?
hgallegos915
Senior Member
Posts: 6451
Joined: June 19th, 2004, 2:01 am
Location: El Paso Tx U.S
Contact:

Post by hgallegos915 »

Do a 0-60 thats the one we usually time. I think my old k8 was 0-60 in like 8 seconds. the ze is in 6 seconds. The k8 engine is not a good perf engine but it is very reliable imo.
-hec

MX-3 w/ curved neck millenia klde, boosted @ 5 psi. /bov and wastegate are good!/ nitto drag radial/ gutted interior/ millenia red top injectors, vortech fmu/aem wideband/ all bolts ons/ Car put together 100% by me. Mechanic? who needs a mechanic? ew.. real men work on their own cars!
MX3KEV21
Regular Member
Posts: 62
Joined: December 25th, 2006, 9:23 pm
Location: SCOTLAND

Post by MX3KEV21 »

yeah the 0 to 60 time is about 8.5 seconds and thats with the engine not running 100% slightly hesitant and lumpy below 4000rpm
User avatar
OutlaW
Regular Member
Posts: 965
Joined: April 22nd, 2006, 6:59 am
Location: Lisbon, Portugal

Post by OutlaW »

i must disagree on those time's ... hey, but that's just me ...
MX34M3
BANNED Member
Posts: 79
Joined: November 18th, 2006, 4:31 pm
Location: Calgary, Alberta, Canada

Post by MX34M3 »

6 seconds?!?!

with my ZE.....Im around 8 seconds (possibly living in altitude accounts for the big diff)
Banned for not following rules.
MX3KEV21
Regular Member
Posts: 62
Joined: December 25th, 2006, 9:23 pm
Location: SCOTLAND

Post by MX3KEV21 »

outlaw how do you mean disagree? thats what my cars does it in. is yours slower or something?
User avatar
JM1EC-V6
Regular Member
Posts: 192
Joined: October 25th, 2005, 8:35 pm
Location: Chicoutimi, Québec , Canada
Contact:

Post by JM1EC-V6 »

I confirm that a KL-ZE is 6 sec 0-60mph.

For the K8, a 8-8.5 is normal.
'94 Mx-3 GS-R SE, KL-ZE Interprep. (From '96 PGT KL)
1110Kg
-Interprep KL31 Spec.
ported heads, Polished combustion chamber,3 angle vlv job,10.3:1 C.R.,0.020'' O.S.,KL31 cam,-0.007'' heads,Long neck IM,KL31 TB, Hotshot headers,2.25'' exhaust,Magnaflow cat
ImageImageImage
hgallegos915
Senior Member
Posts: 6451
Joined: June 19th, 2004, 2:01 am
Location: El Paso Tx U.S
Contact:

Post by hgallegos915 »

8 seconds on a ze? thats SLOW .. im at 4000 feet. Even at higher elevation should be at around 7 secs? Maybe somethig ius wrong?

Check my mods tho.. still 8 secs on a ze doesnt sound to well..

The k8 can pull 7. something seconds if its healthy and modded? i guess. I could get 0-60 in 7 secs with the kfze. k8 was horrible for me.
-hec

MX-3 w/ curved neck millenia klde, boosted @ 5 psi. /bov and wastegate are good!/ nitto drag radial/ gutted interior/ millenia red top injectors, vortech fmu/aem wideband/ all bolts ons/ Car put together 100% by me. Mechanic? who needs a mechanic? ew.. real men work on their own cars!
User avatar
OutlaW
Regular Member
Posts: 965
Joined: April 22nd, 2006, 6:59 am
Location: Lisbon, Portugal

Post by OutlaW »

MX3KEV21
outlaw how do you mean disagree? thats what my cars does it in. is yours slower or something?[/quote]

This is why ...
K8 full stock with 115 bhp at the engine :
http://www.youtube.com/watch?v=PZbXM726efw
MX3KEV21
Regular Member
Posts: 62
Joined: December 25th, 2006, 9:23 pm
Location: SCOTLAND

Post by MX3KEV21 »

aye thats what my car does it in about 8 seconds and that was with a shafted clutch not slipping just burnt out the release bearing was melted to the shaft. my car wont go by 110mph tho.
User avatar
Tommy D
Regular Member
Posts: 151
Joined: August 24th, 2005, 2:41 pm
Location: Cornwall, England

Post by Tommy D »

ZE 6 sec, mine does it in around 5sec, im sure UK climate being colder wont make that much difference. I have Toyo T1R tyres which stick and help accel times

MX3 v's TVR 450

http://www.youtube.com/watch?v=j_qIXvzk58g

0-110mph

http://www.youtube.com/watch?v=Bvi1j_zYjSM
Post Reply

Return to “V6 Technical/Performance”