Seat Swap Recommendations

A forum for Appearance Discussions. (Exterior, Body Kits, & Interior)
Post Reply
666raCing
Regular Member
Posts: 99
Joined: July 1st, 2006, 4:22 pm
Location: Nashua, New Hampshire

Seat Swap Recommendations

Post by 666raCing »

I need to get the stock 92 GS seats outta there. i'd like a pair of harness seats, but i dont know what kind to get, if those are even good for the car. what do you guys suggest i do?
92 Mazda MX-3 GS
User avatar
Aston Wards
Regular Member
Posts: 761
Joined: December 28th, 2001, 2:01 am
Location: Christchurch, New Zealand

Post by Aston Wards »

Wotcha gonna be using the car for..., if it's street driving i'd tend towards the most comfortable sporting seat you can find! (a 2nd hand Porsche seat'd be awesome!) if you wanna go racing, then any of the big names would be fine, just make sure they comply with the local regulations.

i dunno what the laws are where you live, but here, a 2dr with back seats has to have reclinable seats
91 Eunos Presso KF-ZE
89 Nissan 300ZX TT 2+2
90 Nissan 300ZX TT 2+0
Image
jbaysinger
Regular Member
Posts: 44
Joined: December 18th, 2006, 9:45 am
Location: Austin, TX
Contact:

Post by jbaysinger »

I'm a big fan of Corbeau seats for street and light to moderate race use. We had a set of CR1s in our STS Civic autocrosser, and I really liked them both for race and road use. They held me in nicely under high g loading, and were still super comfortable even on long trips. My only complaint was that the side bolsters were a touch high making ingress/egress a bit tough, but still bearable. I'll probably put a set of these in my MX at some point.

Corbeau doesn't list the MX-3 seat bracket on their site, but I saw the part numbers either elsewhere on this forum or on the mx-3.com aftermarket parts listing.
Jeff Baysinger
'92 MX-3 GS
http://www.generic-racing.com
User avatar
monty73741
Forum Moderator
Posts: 2651
Joined: February 11th, 2001, 2:01 am
Location: baltimore,md usa
Contact:

Post by monty73741 »

the seat rails are the same as an escort
Jason Danaher
Please Help Support MX-3.com
MX-3.com Online Store - http://www.mx-3.com/osv3
CafePress - http://www.cafepress.com/mx3com
hharb
Regular Member
Posts: 595
Joined: October 16th, 2006, 12:40 am
Location: Ottawa

Post by hharb »

92 gs leather seats, those are the cool and comfy, i dont understand why ppl go out and spend loads of money and modify their rails when the 92 leather seats are there.
User avatar
neutral
Supporting Member
Posts: 1770
Joined: December 27th, 2004, 10:19 am
Location: U.S. Mid Atlantic

Post by neutral »

fwiw, I wanted to replace my '95 seats which were wearing out - both the cover material and the seat padding. Went with a set by Dynamic Auto Design. http://www.speedstash.com/dad_seats.html

To my eye and especially da butt, seem to be great quality, only cost me $399 USD shipped, and sitting in em is so comfortable and supportive feels like yer sitting in a giant gloved hand - amazing. Great side bolster support and the seat platform/pad is a couple inches longer than stock - very comfy. The fabric is also a super-tough breathable weave that wears extremely well. Speedstash lists their wt @38lbs ea but that is incorrect. Each seat weighs 19 lbs, which is 5-10 lbs less than the 94+ stock ones - can't remember exactly the wt dif. and dunno about pre 94 wt. dif. They are full reclining with a finely articulated adjustment mechanism for changing the reclining angle down to very small adjustments. My .02
Image -Jim
666raCing
Regular Member
Posts: 99
Joined: July 1st, 2006, 4:22 pm
Location: Nashua, New Hampshire

Post by 666raCing »

do you have to buy the track for it or does it fit on the stock seat track? I was looking at seats on http://www.corbeau.com/
92 Mazda MX-3 GS
User avatar
Bling Bling
Regular Member
Posts: 1013
Joined: January 5th, 2005, 10:27 pm
Location: Airdrie, Alberta, Canada

Post by Bling Bling »

Here is a link. The price is reasonable, they come in a variety of colors, and they look pretty good. Considering it will cost me $375 a seat to get recovered, this way you get two new seats plus rails.

http://www.shophyperformance.com/store/ ... d=urqp3hnV
Stacy Whitrick
MX-West Calgary
http://www.cardomain.com/ride/1335558 UPDATED June 6,07
94 GS, Green Envy Pearl QUESTION: Does my car fit the RICE category?
Image
bdr2k5
Regular Member
Posts: 186
Joined: February 17th, 2007, 12:15 am
Location: Atlanta, USA

Post by bdr2k5 »

Bling Bling wrote:Here is a link. The price is reasonable, they come in a variety of colors, and they look pretty good. Considering it will cost me $375 a seat to get recovered, this way you get two new seats plus rails.

http://www.shophyperformance.com/store/ ... d=urqp3hnV
sry i know this topic is kinda old.

i was doing some research on this website about aftermarket seats, and found out you have the same seats i want, i want to get me a set of bomz racing seats, but i was unsure about the brackets, rails and all that stuff, i've never installed aftermarket seats before, i know corksport got osme brackets for mazdaspeedseats, but i cant find anything for bomz racing...

what do you do, can somebody explaian? :P
93 mx-3 w/ Curved Neck klze
bdr2k5
Regular Member
Posts: 186
Joined: February 17th, 2007, 12:15 am
Location: Atlanta, USA

Post by bdr2k5 »

omfg i just notice that website got those seats listed under the "cheap seats" section :lol:
93 mx-3 w/ Curved Neck klze
Highbody
Regular Member
Posts: 50
Joined: December 24th, 2007, 1:25 am
Location: Connecticut

Post by Highbody »

i think corbeau seats are some of the most uncomfortable seats ever.. but it all depends on what the person likes and there body type... i wouldent go too cheap on seats because most of the time you compromise price for comfort,,, in a year or so when you could have had a nice recaro for 100 more your going to be kicking your self for not just spending the extra
Post Reply

Return to “Appearance”