thermostat... how to remove

V6 Technical/Performance Discussions
Post Reply
alreadydefective
Regular Member
Posts: 49
Joined: October 27th, 2006, 2:26 am
Location: Omaha

thermostat... how to remove

Post by alreadydefective »

so, ive disconnected wires and wires, and ive disconnected the inlet pipe to get to the thermostat, and ive finally gotten to the thermostat... its sitting there waiting to come out, and i cant seems to get it out, i tried pulling on it, but it wont budge, do i just keep pulling on it to get it out or is there some special trick to it?
User avatar
PATDIESEL
Senior Member
Posts: 4476
Joined: August 13th, 2001, 2:01 am
antispam: ~SPAM*SUX~
Location: Atlanta, GA.

Post by PATDIESEL »

"Tap" it with a hammer. Rubber mallett if you have one is better. It is just calcified in there. No tricks necessary.
Image
ZE -strait neck,headers,2.5 exhaust,pheno spacers,lower cross member,GC coils,MS struts,Brembo slotted rotors,filled MS mounts,SS brake/clutch lines, CAI,to rear bat reloc,Hella headlamps,Hella DE fogs 180WHP
Post Reply

Return to “V6 Technical/Performance”