never did the lambo conversion but fenders are pretty simple to remove. bolts alnd the top of the fender whe the hood is up ( i think 4). Then open the door and inside like where the door hinges are there is one or 2 bolts ans then the last bolt on the very bottom of the fender sort've under the car. You will need to take a few screws out of the inner fender plastic too.
1993 GS
-MS front -functional molded hood scoop
-MS molded sides-shaved antenna
-Civic projectors -New black paintjob
is it possible to install the doors without removing the fenders?cuz i have a molded kit, and dont wanna wreck it.
TREVO-Under major construction, Bp coming soon! TO a mx3 near you
1993 MX-3 RS,FULL BLITZ KIT(PROTOTYPE)17"10 SPOKE RIMS,SOHC 1.6L. http://www.cardomain.com/ride/2189811
TREVO-Under major construction, Bp coming soon! TO a mx3 near you
1993 MX-3 RS,FULL BLITZ KIT(PROTOTYPE)17"10 SPOKE RIMS,SOHC 1.6L. http://www.cardomain.com/ride/2189811
so im confused?? lol
has any one done this conversion, if so would you be able to tell me whats involved
ive got a universal(cringe) bolt on kit arriving from the us any day and was wondering if there any surprises i should look out for