-

This forum is for Discussion on Suspension issues.
Post Reply
BatMX3Man
Regular Member
Posts: 33
Joined: February 10th, 2004, 2:01 am

-

Post by BatMX3Man »

-
Last edited by BatMX3Man on August 10th, 2021, 2:23 am, edited 1 time in total.
hgallegos915
Senior Member
Posts: 6451
Joined: June 19th, 2004, 2:01 am
Location: El Paso Tx U.S
Contact:

Post by hgallegos915 »

Is the fluid resevoir full?
-hec

MX-3 w/ curved neck millenia klde, boosted @ 5 psi. /bov and wastegate are good!/ nitto drag radial/ gutted interior/ millenia red top injectors, vortech fmu/aem wideband/ all bolts ons/ Car put together 100% by me. Mechanic? who needs a mechanic? ew.. real men work on their own cars!
User avatar
verzutiko
Supporting Member
Posts: 355
Joined: July 3rd, 2004, 2:01 am
Location: Norway

Post by verzutiko »

hgallegos915 wrote:Is the fluid resevoir full?
Second that. Check you brake fluid reservoir. Also check your brake calipers, are they seized and leaking fluid? I had this similar problem.
'92 GS
My worklog
User avatar
neutral
Supporting Member
Posts: 1770
Joined: December 27th, 2004, 10:19 am
Location: U.S. Mid Atlantic

Post by neutral »

hgallegos915 wrote:Is the fluid resevoir full?
Third that. As your brake pads/shoes wear over time, the fluid level in the master cylinder reservoir also goes down. When it goes low enough, that light comes on the dash as a warning to check the fluid level. Usually first notice lighting up during quick accel/hard stops/hard turns cuz your low brake fluid is triggering the sensor at those times.
Image -Jim
BatMX3Man
Regular Member
Posts: 33
Joined: February 10th, 2004, 2:01 am

Post by BatMX3Man »

-
Last edited by BatMX3Man on August 10th, 2021, 2:23 am, edited 1 time in total.
User avatar
Tunes67
Supporting Member
Posts: 4708
Joined: January 27th, 2005, 6:36 pm
Location: Everett, WA
Contact:

Post by Tunes67 »

Most likely its just your fluid level.. in fact if you did your brakes a few months ago.. your pad level may have worn down a bit since then.. when this happens the caliper piston stays extended from the caliper housing further.. when this happens the fluid level slowly goes down as the piston is further extended until eventually there is a need for more brake fluid in the system. Pretty much what Neutral said LOL

Tunes67
"So long.. and thanks for all the fish!" "Momma says VW Bugs are the devil" "This one time at band camp.. I stuck a flute in my Throttle Body" ;)
"Screw you guys.. I am goin home"

I am the Cranky God of Mods!!! Tremble before my fury!! LOL
Post Reply

Return to “Suspension/Brakes/Wheels/Tires”