Hey
Im trying to remove de read brake pads. On one side of the car, it worked perfectly but on the other side, 1 of the pad is jammed. While i was looking at it, i realised there was some metal pins holding the pad in place (which were missing on the other side) and i can find out how to unclip the pad. I've went thru the Shop manual and I cant seem to find what I'm looking for.
Anyone got the same problem as me?
The car is a MX3 GS V6 1995 (Rear disc brakes)
Thanks
Rear brake pads jamming...
-
- Regular Member
- Posts: 843
- Joined: December 31st, 2000, 2:01 am
- Location: Sherbrooke, Québec, Canada
- Contact:
Rear brake pads jamming...
Jonathan Michaud
93 Red RS
93 Red RS
- mitmaks
- Senior Member
- Posts: 8704
- Joined: September 10th, 2001, 2:01 am
- antispam: ~SPAM*SUX~
- Location: Spokane, WA
- Contact:
did you release hand brake? got any pics where its stuck at
Magnum s/s lines, strut bars, carbon fiber bezel, indiglow gauge, Sony Xplod, inverted c/f hood, SRD lower tie bar '93 GS SE '95 Cobra SVT #2722 '68 Charger R/T 440
http://www.cardomain.com/id/mitmaks
![Image](http://img66.exs.cx/img66/9841/390777787yt.jpg)
http://www.cardomain.com/id/mitmaks
![Image](http://img66.exs.cx/img66/9841/390777787yt.jpg)
- PATDIESEL
- Senior Member
- Posts: 4476
- Joined: August 13th, 2001, 2:01 am
- antispam: ~SPAM*SUX~
- Location: Atlanta, GA.
"Tap" the brake pad with a hammer. It is just rusted on or pressed in from heat and pressure.
![Image](http://www.patdiesel.atlantamx3.com/MX-3/patdieselsigMX-3.jpg)
ZE -strait neck,headers,2.5 exhaust,pheno spacers,lower cross member,GC coils,MS struts,Brembo slotted rotors,filled MS mounts,SS brake/clutch lines, CAI,to rear bat reloc,Hella headlamps,Hella DE fogs 180WHP