OEM Piston for KLZE
- Ice Racing
- Regular Member
- Posts: 104
- Joined: November 7th, 2006, 11:31 pm
- Location: Québec
OEM Piston for KLZE
I am looking for mazda original part number for klze piston. I have to install new ones (oversize). I also want to shave the heads, is 0.0040 too much?
GS KLZE FOR ICE RACING
-
- Regular Member
- Posts: 151
- Joined: February 22nd, 2006, 3:41 pm
- Location: St. Thomas
from what i read on probe talk you can shave up to .080 off before its an interferance engine....i think corksport sells the new ZE pistons
2006 best ET 14.43 @ 96.9mph
93 MX-3 GS-95 Curveneck klze, kl-01 cammed,homemade CAI,HEI module, chipped kl-07 ECU,UDP,KYB GR-2 struts,DropZone lowering springs, Toyo Proxes 4's 205-50-r15
parts to be installed:Turbo hot pipes,T04E/t3 50/63 57 trim, ssqv BOV, hks style 38mm wastegate
the rest of my turbo set up and IPP hp rebuild kit is in the NEAR future
SOON TO BE MX-3ZE-T
93 MX-3 GS-95 Curveneck klze, kl-01 cammed,homemade CAI,HEI module, chipped kl-07 ECU,UDP,KYB GR-2 struts,DropZone lowering springs, Toyo Proxes 4's 205-50-r15
parts to be installed:Turbo hot pipes,T04E/t3 50/63 57 trim, ssqv BOV, hks style 38mm wastegate
the rest of my turbo set up and IPP hp rebuild kit is in the NEAR future
SOON TO BE MX-3ZE-T
- kiwi_MX3
- Regular Member
- Posts: 736
- Joined: August 10th, 2004, 2:01 am
- Location: Backpacking in Canada in vancouver 13march onwards
- Contact:
mazda did'nt produce OEM oversized pistins so you will have to look
aftermarket for something.
as for shaving 0.004" off, that would not even compensate for a valve
regrind
aftermarket for something.
as for shaving 0.004" off, that would not even compensate for a valve
regrind
Kiwi - Native Bird Of New Zealand, semi-nocturnal, secretive bird
Flightless, though can be found flying firstclass
Poor eyesight, though can spot a good pub at 100yards.
Flightless, though can be found flying firstclass
Poor eyesight, though can spot a good pub at 100yards.
- Ice Racing
- Regular Member
- Posts: 104
- Joined: November 7th, 2006, 11:31 pm
- Location: Québec
OEM Piston for KLZE
Sorry i meant 40 thousand of an inch. I want it to be safe for racing (reliable)
GS KLZE FOR ICE RACING
- Nd4SpdSe
- Senior Member
- Posts: 11212
- Joined: May 25th, 2002, 2:01 am
- Location: Québec City, Quebec, Canada
- Contact:
One guy recently got a ZE rebuild kit from CorkSport and they came with .050 overbore pistons, Mazda OEMkiwi_MX3 wrote:mazda did'nt produce OEM oversized pistins so you will have to look aftermarket for something.
http://forums.probetalk.com/showthread.php?t=1701214996
(If it wasn't xmas time, i'd pick that up)
1992 Mazda Mx-3 GSR - 2.5L KLZE : Award Winning Show Car & Race Car ['02-'09] (Retired)
2004 Mazda RX-8 GT - Renesis Wankel : LS3 Coils, BHR Mid-Pipe + Falken RT-615K 245/40r18
2011 Mazda Mazda2 GS - 1.5L Manual : Yozora Edition (1 of 500)
2003 Nissan Xterra SE - 4x4 Supercharged : 2" Body Lift, 4" Suspension Lift & 33" MTR Kevlar
2001 Nissan Frontier SE - The Frontrailer : Expedition/Off-Road Trailer Project
2004 Mazda RX-8 GT - Renesis Wankel : LS3 Coils, BHR Mid-Pipe + Falken RT-615K 245/40r18
2011 Mazda Mazda2 GS - 1.5L Manual : Yozora Edition (1 of 500)
2003 Nissan Xterra SE - 4x4 Supercharged : 2" Body Lift, 4" Suspension Lift & 33" MTR Kevlar
2001 Nissan Frontier SE - The Frontrailer : Expedition/Off-Road Trailer Project
- JM1EC-V6
- Regular Member
- Posts: 192
- Joined: October 25th, 2005, 8:35 pm
- Location: Chicoutimi, Québec , Canada
- Contact:
totally false. Mazda produces oversized pistons.
'94 Mx-3 GS-R SE, KL-ZE Interprep. (From '96 PGT KL)
1110Kg
-Interprep KL31 Spec.
ported heads, Polished combustion chamber,3 angle vlv job,10.3:1 C.R.,0.020'' O.S.,KL31 cam,-0.007'' heads,Long neck IM,KL31 TB, Hotshot headers,2.25'' exhaust,Magnaflow cat
1110Kg
-Interprep KL31 Spec.
ported heads, Polished combustion chamber,3 angle vlv job,10.3:1 C.R.,0.020'' O.S.,KL31 cam,-0.007'' heads,Long neck IM,KL31 TB, Hotshot headers,2.25'' exhaust,Magnaflow cat
- jschrauwen
- Forum Moderator
- Posts: 6052
- Joined: September 27th, 2003, 2:01 am
- Location: Frankford, Ontario, Canada
- Contact:
JM1EC-V6
Regular Member
Age: 17
Gender:
Joined: 25 Oct 2005
Posts: 55
Location: Chicoutimi, Québec , Canada
I enjoyed some wild times in sister city - Bagotville
Regular Member
Age: 17
Gender:
Joined: 25 Oct 2005
Posts: 55
Location: Chicoutimi, Québec , Canada
I enjoyed some wild times in sister city - Bagotville
'92 GS-ZE - sold, '95 GS - sold, '02 Protege LX - Daughter, '00 Audi A4 2.8 QTip, Ducati TT2
90 JDM RHD 300ZX TT - 572.1 RWHP | 590.0 RWTQ | 21 PSI | Pump gas
90 JDM RHD 300ZX TT - 572.1 RWHP | 590.0 RWTQ | 21 PSI | Pump gas
- kiwi_MX3
- Regular Member
- Posts: 736
- Joined: August 10th, 2004, 2:01 am
- Location: Backpacking in Canada in vancouver 13march onwards
- Contact:
John you party aniamal.jschrauwen wrote:JM1EC-V6
Regular Member
Age: 17
Gender:
Joined: 25 Oct 2005
Posts: 55
Location: Chicoutimi, Québec , Canada
I enjoyed some wild times in sister city - Bagotville
Kiwi - Native Bird Of New Zealand, semi-nocturnal, secretive bird
Flightless, though can be found flying firstclass
Poor eyesight, though can spot a good pub at 100yards.
Flightless, though can be found flying firstclass
Poor eyesight, though can spot a good pub at 100yards.
- mx3autozam
- Senior Member
- Posts: 2950
- Joined: September 24th, 2005, 9:09 pm
- Location: Kitchener
Mike is taht the link i sent you?Nd4SpdSe wrote:One guy recently got a ZE rebuild kit from CorkSport and they came with .050 overbore pistons, Mazda OEMkiwi_MX3 wrote:mazda did'nt produce OEM oversized pistins so you will have to look aftermarket for something.
http://forums.probetalk.com/showthread.php?t=1701214996
(If it wasn't xmas time, i'd pick that up)
Thats a nice kit he ahs but thsoe are de pistons look at the dome. He claims there ze but I know there not.
93 Mazda MX3 KLZE Turbo
- Ice Racing
- Regular Member
- Posts: 104
- Joined: November 7th, 2006, 11:31 pm
- Location: Québec
mx3autozam wrote:Mike is taht the link i sent you?Nd4SpdSe wrote:One guy recently got a ZE rebuild kit from CorkSport and they came with .050 overbore pistons, Mazda OEMkiwi_MX3 wrote:mazda did'nt produce OEM oversized pistins so you will have to look aftermarket for something.
http://forums.probetalk.com/showthread.php?t=1701214996
(If it wasn't xmas time, i'd pick that up)
Thats a nice kit he ahs but thsoe are de pistons look at the dome. He claims there ze but I know there not.
How sure are you that they are not KLZE ? Can anybody check and confirm part number direct application with Mazda ?
GS KLZE FOR ICE RACING
- Nd4SpdSe
- Senior Member
- Posts: 11212
- Joined: May 25th, 2002, 2:01 am
- Location: Québec City, Quebec, Canada
- Contact:
Would bemx3autozam wrote:Mike is taht the link i sent you?
1992 Mazda Mx-3 GSR - 2.5L KLZE : Award Winning Show Car & Race Car ['02-'09] (Retired)
2004 Mazda RX-8 GT - Renesis Wankel : LS3 Coils, BHR Mid-Pipe + Falken RT-615K 245/40r18
2011 Mazda Mazda2 GS - 1.5L Manual : Yozora Edition (1 of 500)
2003 Nissan Xterra SE - 4x4 Supercharged : 2" Body Lift, 4" Suspension Lift & 33" MTR Kevlar
2001 Nissan Frontier SE - The Frontrailer : Expedition/Off-Road Trailer Project
2004 Mazda RX-8 GT - Renesis Wankel : LS3 Coils, BHR Mid-Pipe + Falken RT-615K 245/40r18
2011 Mazda Mazda2 GS - 1.5L Manual : Yozora Edition (1 of 500)
2003 Nissan Xterra SE - 4x4 Supercharged : 2" Body Lift, 4" Suspension Lift & 33" MTR Kevlar
2001 Nissan Frontier SE - The Frontrailer : Expedition/Off-Road Trailer Project
- mx3autozam
- Senior Member
- Posts: 2950
- Joined: September 24th, 2005, 9:09 pm
- Location: Kitchener
Have fun talking to Mazda about a klze. they will have no idea what it even is.Ice Racing wrote:mx3autozam wrote:Mike is taht the link i sent you?Nd4SpdSe wrote: One guy recently got a ZE rebuild kit from CorkSport and they came with .050 overbore pistons, Mazda OEM
http://forums.probetalk.com/showthread.php?t=1701214996
(If it wasn't xmas time, i'd pick that up)
Thats a nice kit he ahs but thsoe are de pistons look at the dome. He claims there ze but I know there not.
How sure are you that they are not KLZE ? Can anybody check and confirm part number direct application with Mazda ?
We all know that ze pistons are flat top and de are concave.
93 Mazda MX3 KLZE Turbo
- Ice Racing
- Regular Member
- Posts: 104
- Joined: November 7th, 2006, 11:31 pm
- Location: Québec
PISTON
OK then, where can i buy regular flat top piston? not the expensive stuff but regular...
GS KLZE FOR ICE RACING
kiwi_MX3 wrote:mazda did'nt produce OEM oversized pistins so you will have to look
aftermarket for something.
as for shaving 0.004" off, that would not even compensate for a valve
regrind
well im totally oposite iv chaved my heads to .50 made 30 more pounds and made adjustable sprokets and i compensated the timimg it worked realy nice the timing is just as stock very nice work id thinck it will work just fine ...
11.20 @120 1.58 60 ft ALL Motor KL