Clutch Master Cylinders and Clutch Slave Cylinders
Are these two parts interchangible? In other words can I get them out of the other Mazda or Probe (v6 cars) and use them on my MX3 for the ATX to MTX swap?
I found a Mazda 626 (93-97) OEM Clutch Master Cylinder for $50
What prices should I be able to get these parts for?
Also, another few questions
So pretty much, the CMCs and CSCs are interchangible aswell as the link shift linkage and rod? Everything even the Clutch and tranny is interchangible except the CV Joints?
ATX to MTX, need some info, are these parts interchangible?
-
- Senior Member
- Posts: 2220
- Joined: October 17th, 2004, 2:01 am
- Location: SLC, Utah
ATX to MTX, need some info, are these parts interchangible?
2008 Mazda 3
1993 MX3 GS
KLZE, Fidanza flywheel, KL31 CAMs, South Bend Stage I Clutch, Pacesetter STS, SS AutoChromes, Magnaflow muffler, 2.25' Exhaust, CAI, Blaster Coil HEI, KLDE Valvetrain, 5 Speed Swap
1993 MX3 GS
KLZE, Fidanza flywheel, KL31 CAMs, South Bend Stage I Clutch, Pacesetter STS, SS AutoChromes, Magnaflow muffler, 2.25' Exhaust, CAI, Blaster Coil HEI, KLDE Valvetrain, 5 Speed Swap
clutch master cylinder interchangible with protogay and escort mx3 better tho
slave cylinder is the same for all v6 cars
shift rods must be from a mv3 gs. the mx6 626 probe are to long and not curved correctly. a protogay escort 1 is close and could be welded but thats a pna
slave cylinder is the same for all v6 cars
shift rods must be from a mv3 gs. the mx6 626 probe are to long and not curved correctly. a protogay escort 1 is close and could be welded but thats a pna
JUDGE ME ALL YOU WANT
93 gs, klde swap, kl trans, strait 2.5'' ehaust, euro front bumper, cold air intake, hei ign ,50 shot &
9.60s n the 8th mile so far 8.50s sprayn now
150 shot
93 gs, klde swap, kl trans, strait 2.5'' ehaust, euro front bumper, cold air intake, hei ign ,50 shot &
9.60s n the 8th mile so far 8.50s sprayn now
150 shot
-
- Senior Member
- Posts: 2220
- Joined: October 17th, 2004, 2:01 am
- Location: SLC, Utah